1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your HamGeek RS-998 SDR Transceiver. The RS-998 is a high-performance mobile radio designed for amateur radio enthusiasts, featuring DDC/DUC technology, a 7-inch multi-point touch screen, and all-mode capabilities across HF and UV bands. Please read this manual thoroughly to ensure safe and optimal use of your device.
2. Product Features
- Advanced Display: 7-inch multi-point capacitive touch screen with clear visibility even under strong light, featuring a 3D waterfall spectrum diagram.
- Connectivity: Built-in Wi-Fi for online radio functionality and a built-in USB sound card for easy computer connection.
- Digital Modes: Integrated CW decoding and FT8 encode/decode capabilities, eliminating the need for external devices.
- Recording & Storage: Built-in TF card slot for multiple recordings and playback, including 5 dedicated recordings for CW mode. Supports TF card for firmware upgrades.
- Customization: Multi-scene mode selection with fully open-source software and hardware for user modification.
- RF Performance: Equipped with a Low Noise Amplifier (LNA) and band-pass filter for enhanced reception.
- Antenna Tuning: Built-in antenna tuner (specific to the RS-998 model).
- Durable Construction: All-aluminum anodized housing for precision design and production.
3. Package Contents
Please check the package for the following items:
- 1 x RS-998 Transceiver Unit
- 1 x Handheld Microphone
- 1 x DC Power Cable
If any items are missing or damaged, please contact your vendor immediately.
4. Setup Guide
4.1 Power Connection
Connect the supplied DC power cable to the transceiver's power input. Ensure the power supply provides 13.8V DC. The unit features over-voltage and polarity reverse protection, but always double-check connections to prevent damage.
4.2 Antenna Connection
The RS-998 features dual antenna inputs. Connect your appropriate HF and/or UV antennas to the designated ports. For optimal performance, ensure your antennas are properly tuned for the desired operating frequencies. The built-in antenna tuner (for RS-998) can assist with impedance matching.
4.3 Microphone Connection
Plug the handheld microphone into the MIC port on the front panel of the transceiver.
4.4 USB & Other Connections
For computer integration, connect a USB cable from the transceiver's USB port to your computer. This enables the built-in USB sound card functionality. Additional ports such as Line-in, Phone, Keyer, and DFU are available for specific applications as needed.

Figure 1: Side view of the RS-998 with port labels (Line-in, Phone, Keyer, DFU, Mic).
5. Operating Instructions
5.1 Powering On/Off
Press and hold the 'POWER' button on the front panel to turn the transceiver on or off.
5.2 Touch Screen Interface
The 7-inch multi-point capacitive touch screen is the primary interface for controlling the RS-998. Navigate menus, adjust settings, and view the 3D waterfall spectrum diagram by touching and swiping on the screen. Refer to the on-screen prompts for specific functions.

Figure 2: Front panel of the RS-998 showing the touch screen and controls.
5.3 Frequency and Mode Selection
Use the touch screen or the dedicated VFO A/B and MODE buttons to select your desired operating frequency and modulation type (CW, LSB, USB, AM, FM, WFM, DIGI). The main tuning knob allows for fine frequency adjustments.
5.4 Wi-Fi and Online Radio
Access the system settings via the touch screen to configure Wi-Fi connectivity. Once connected to a network, the transceiver can display online radio content.
5.5 CW and FT8 Operation
The RS-998 includes built-in decoders for CW and FT8. Activate these functions through the menu system. For CW, the TF card supports up to 5 recordings for quick playback during operation.
5.6 Recording and Playback
Insert a TF card into the designated slot. Use the recording functions available in the menu to capture audio or specific CW messages. Playback options are also accessible through the touch screen interface.
5.7 Antenna Tuner (RS-998 Only)
If your RS-998 model includes the built-in antenna tuner, activate it via the menu to automatically match your antenna's impedance for optimal transmission efficiency. Consult the on-screen instructions for tuner operation.
6. Maintenance
6.1 Cleaning
Regularly clean the transceiver's exterior with a soft, dry cloth. For the touch screen, use a microfiber cloth specifically designed for electronics. Avoid abrasive cleaners or solvents that could damage the finish or screen.
6.2 Environmental Conditions
Operate the transceiver within recommended temperature and humidity ranges. Avoid exposing the unit to direct sunlight, extreme temperatures, dust, or moisture. Ensure adequate ventilation to prevent overheating.
6.3 Firmware Updates
Periodically check the manufacturer's website for firmware updates. Updates can be installed via the TF card, improving performance and adding new features. Follow the specific instructions provided with each firmware release.
7. Troubleshooting
7.1 No Power
- Check the DC power cable connection to both the transceiver and the power supply.
- Verify the power supply is providing 13.8V DC and is functioning correctly.
- Ensure the power button is pressed firmly.
7.2 Poor Reception/Transmission
- Confirm antennas are securely connected to the correct ports.
- Check antenna SWR (Standing Wave Ratio) and ensure it is within acceptable limits.
- Verify the correct frequency and modulation mode are selected.
- Ensure the LNA is enabled and the band-pass filter settings are appropriate for your operating band.
- If applicable, use the built-in antenna tuner to optimize impedance matching.
7.3 Touch Screen Unresponsive
- Restart the transceiver.
- Ensure the screen is clean and free of debris or moisture.
- If the issue persists, contact technical support.
8. Specifications
| Feature | Specification |
|---|---|
| RX Frequency | 0.5MHz-750MHz |
| TX Frequency | 0.5MHz-200MHz (Amateur Band Only) |
| Output Power (RS-998) | 100W (HF) and 50W+ (VHF) |
| Antenna Type | Dual Antenna Input |
| Modulation Type (TX/RX) | CW, LSB, USB, AM, FM, WFM, DIGI |
| Variable Attenuator | 0-31dB |
| ADC Dynamic Range | ~100dB |
| Supply Voltage | 13.8V (Over-voltage and Polarity Reverse Protection) |
| RX Current | ~0.7A (3'2QRP) and 0.9A (7'BIG) |
| TX Current | ~2.5A+ (QRP) and 15A+ (BIG) |
| Dimensions (WxHxD) | 340 x 140 x 135mm / 13.4 x 5.5 x 5.3" |
| Weight | 2903g / 6.4lb |
| Model Number | 82301 |
| Origin | Mainland China, Guangdong |
9. User Tips
- Antenna Tuner: The RS-998 model includes a built-in antenna tuner. Make sure to utilize this feature for optimal signal transmission and to protect your transceiver from high SWR.
- Software Customization: Given the open-source nature of the software and hardware, experienced users may explore modifications to tailor the transceiver to specific needs. Always back up your current configuration before making changes.
- TF Card Use: Regularly back up important recordings from your TF card to prevent data loss. Ensure the TF card is properly inserted and formatted as required by the device.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized dealer. Keep your purchase receipt as proof of purchase.