coolo ZG-3032

Contents

Tuya Smart ZigBee Soil Moisture Sensor Temperature and Humidity Meter

Model: ZG-3032

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Tuya Smart ZigBee Soil Moisture Sensor. This device is designed to help you monitor the health of your plants by detecting soil moisture, ambient temperature, and humidity.

The sensor enables smart monitoring of soil conditions, allowing for real-time detection of status changes and sending water shortage alerts to your mobile app when the soil reaches a critical state. Its wide measurement range (0-100% humidity) helps accurately determine watering needs. With APP remote control, you can monitor your plants anytime, anywhere via your smartphone. The device is lightweight, easy to use (plug and play), and features low energy consumption for long-lasting operation, making it an ideal tool for garden automation.

Tuya Smart ZigBee Soil Moisture Sensor with app interface and plant
The Tuya Smart ZigBee Soil Moisture Sensor in use, displaying its app interface and application in a potted plant.

2. Safety Information

  • Please read this manual carefully before using the product to ensure correct operation and to avoid damage.
  • Handle the product with care to prevent physical damage.
  • Waterproof Rating: The sensor is designed to withstand watering from the top but cannot be submerged in water. Ensure the battery compartment remains dry.
Waterproof rating diagram showing sensor being watered from above but not submerged
Illustration of the sensor's waterproof rating: suitable for top-down watering, but not immersion.

3. Package Contents

Please check the package for the following items:

  • 1 x Tuya Smart ZigBee Soil Moisture Sensor
  • Note: 2 x LR03 AAA batteries are required but NOT included in the package.

4. Product Overview

Familiarize yourself with the components of your soil moisture sensor:

Diagram labeling components of the soil moisture sensor
Labeled diagram of the sensor components.
  • Battery Cover: Located at the top, slides open for battery insertion.
  • Reset Key: A small button, long-press for 3 seconds to enter network configuration mode.
  • Indicator Light: Provides status feedback during operation and pairing.
  • Air Temperature and Humidity Sensor: Integrated into the main body for ambient readings.
  • Soil Moisture Sensor: The probe that is inserted into the soil.

5. Specifications

FeatureDetail
Model NumberZG-3032
Brand Namecoolo
Smart Home PlatformTuya
Wireless ProtocolZigbee 3.0 (requires Zigbee gateway)
Soil Moisture Range0%~100%
Temperature Resolution0.1℃
Humidity Resolution1%
Temperature Measurement Accuracy±0.5℃
Humidity Measurement Accuracy±5%
Working VoltageDC 3.0V
Standby Current≤20uA
Battery TypeLR03 AAA Battery * 2pcs (not included)
Standby Time≥12 Months
Working Temperature-10~55°C
Working Humiditymax 99%RH
Wattage3W
CertificationsCE, RoHS, WEEE, UL, FCC
OriginMainland China
Product Parameters table
Detailed product parameters.
Product Size diagram with dimensions
Product dimensions: 150mm total length, 30mm width, 18mm thickness, 68mm body length, 82mm probe length.

6. Setup Guide

6.1. Powering On

  1. Locate the battery cover at the top of the sensor.
  2. Gently pull the battery cover upward to open it.
  3. Insert two LR03 AAA batteries, ensuring correct polarity (positive and negative terminals).
  4. Close the battery cover securely.
Battery insertion and app battery percentage display
Illustration of battery insertion and how battery percentage is displayed in the app.

6.2. Network Configuration (Pairing)

This device requires a Zigbee gateway (hub) to function. Ensure your Zigbee gateway is powered on and connected to your home network.

  1. Long-press the Reset Key on the sensor for 3 seconds until the red indicator light begins to flash. This indicates the sensor has entered network configuration mode.
  2. Open your Tuya Smart Life or compatible Zigbee app.
  3. Select your Zigbee gateway within the app.
  4. Follow the app's instructions to 'Add New Device' or 'Search for Devices'.
  5. Wait for the app to detect and bind with the sensor. The indicator light on the sensor will stop flashing once successfully paired.
Smart Detection Through Zigbee Gateway setup diagram
Diagram illustrating the connection flow: Smart Soil Moisture Sensor to Zigbee or Multi-mode Gateway, then to a 2.4GHz Router.

6.3. Sensor Placement

  1. Before inserting the sensor, ensure the surface of the soil moisture sensor probe is clean.
  2. Insert the sensor into the soil to a depth of at least 2/3 of the probe length. Ensure that the sensing surface of the moisture sensor is in firm contact with the soil for accurate readings.
  3. If the soil is too dry, you may add some water first to soften the soil before insertion.
  4. Avoid submerging the entire device, only the probe should be in the soil.
Before Using instructions: cleaning, insertion, checking for water, and data upload
Step-by-step guide for preparing and inserting the sensor into the soil, including cleaning the probe and ensuring proper contact.

7. Operating Instructions

7.1. Monitoring Data

After successful insertion and pairing, the sensor will begin collecting data:

  • Approximately 30 seconds to 1 minute after insertion, the initial moisture, ambient temperature, and humidity values will be detected.
  • The sensor collects moisture levels and temperature/humidity every 30 seconds. Data is uploaded to the app when the moisture value differs by 3%, the air temperature value differs by 0.3°C, or the ambient humidity value differs by 5%.
Real-time Detection of Status Changes app graph
App interface showing real-time graphs of air temperature, humidity value, and soil moisture.

7.2. Water Shortage Warning

The mobile app will send out a water shortage alert when the soil moisture level drops below a predefined threshold, indicating it's time to water your plant.

Water Shortage Warning feature with app screenshot
App screenshot demonstrating a water shortage warning with a soil moisture level below 30%.

7.3. Temperature Unit Conversion

You can choose your preferred temperature reading unit (Fahrenheit or Celsius) within the mobile application settings.

Temperature Unit Convert °C & °F setting in the app
App setting for converting temperature units between Celsius and Fahrenheit.

8. Calibration

There may be some variation in moisture detection depending on soil type and environmental factors. Users can perform calibration within the app settings to adjust readings according to the actual situation.

Calibration Mode for humidity, temperature, and soil humidity in the app
App interface showing calibration options for Humidity, Temperature, and Soil Humidity, with adjustable ranges.

9. User Tips

  • Integration: The sensor integrates well with Home Assistant (HA) and Zigbee2MQTT (z2m). For HA, it can work with ZHA, though some users might use MQTT.
  • Gateway Requirement: A Zigbee Gateway 3.0 is essential for the sensor's operation. It works effectively with Tuya Smart Life Multi-mode Gateways.
  • Data Reporting: While not always the highest fidelity, the reporting frequency is generally sufficient for typical plant monitoring needs.
  • Initial Readings: It may take a few days for the moisture sensors to stabilize and start tracking levels consistently after initial setup.
  • Placement: For optimal performance, especially with indoor plants, ensure the sensor is placed correctly and the probe has good contact with the soil.
  • App Use: The Smart Life/Tuya app is highly useful for monitoring and managing the sensor.
  • Outdoor Use: While some users report success outdoors, be mindful of the waterproof rating (not submersible) and potential range limitations.

10. Troubleshooting

10.1. No Readings or Inaccurate Data

  • Check Sensor Contact: Ensure the soil moisture probe is clean and inserted deeply enough (at least 2/3) into the soil, making good contact. If the soil is too dry, moisten it slightly before re-inserting.
  • Recalibration: If readings seem inaccurate, use the in-app calibration feature to adjust the humidity, temperature, and soil humidity settings according to your specific environment and soil type.
  • Patience: After initial setup or re-insertion, it might take some time (up to a few days) for the sensor to provide stable and consistent readings.
  • Battery Level: Check the battery percentage in the app. Replace batteries if low.

10.2. Connectivity Issues

  • Zigbee Gateway: Ensure your Zigbee gateway is powered on, connected to your network, and within range of the sensor.
  • Range: The wireless range may not be optimal in all environments. Try placing the gateway closer to the sensor or using a Zigbee repeater to extend the network.
  • Re-pairing: If the sensor loses connection, try re-pairing it with your Zigbee gateway by following the network configuration steps (Section 6.2).

10.3. Physical Damage

  • If the product or its packaging arrived damaged, inspect the sensor for any visible defects that might affect its functionality.

11. Maintenance

  • Cleaning: Regularly clean the soil moisture probe with a soft, damp cloth to remove any soil residue or buildup that could affect accuracy. Ensure the probe is dry before re-insertion.
  • Battery Replacement: When the app indicates low battery, replace the two LR03 AAA batteries. Ensure correct polarity during insertion.
  • Storage: If storing the sensor for an extended period, remove the batteries and store the device in a cool, dry place.
Applications of the sensor in various plant environments
The sensor can be used in various settings including indoor potted plants, outdoor crops, vegetables in greenhouses, and gardens.

12. Warranty and Support

For detailed warranty information and further technical support, please refer to the official user manual PDF or contact Coolo Official Store directly.

A comprehensive user manual in PDF format is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.