JIKONG JK-BD6A8S10P, JK-B1A8S10P

Contents

JIKONG Smart Active Balance BMS Instruction Manual

Models: JK-BD6A8S10P, JK-B1A8S10P

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JIKONG Smart Active Balance Battery Management System (BMS). The JIKONG BMS is designed to protect and optimize the performance of LiFePO4, Li-ion, and LTO battery packs, ensuring safety and extending battery life. Please read this manual thoroughly before installation and use.

JIKONG Smart Active Balance BMS unit
Figure 1: JIKONG Smart Active Balance BMS Unit (Model JK-BD6A8S10P shown)

Specifications

The JIKONG Smart Active Balance BMS offers robust features for battery management. Key specifications are detailed below:

FeatureDescription
Brand NameJIKONG
Model NumbersJK-BD6A8S10P, JK-B1A8S10P
Battery Type CompatibilityLiFePO4, Li-ion, LTO Battery BMS
Cell Configuration4S, 5S, 6S, 7S, 8S (12V, 24V systems)
Charging CurrentUp to 100A
Balance FunctionActive Balanced BMS (0.6A active balance current)
BMS TypeSMART BMS
Charge and Discharge PortCommon Port BMS
Protection FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, Temperature Protection
CertificationsCE, FCC, RoHS
Usage ScenarioPower BMS applications
Package Dimensions (L x W x H)20 cm x 16 cm x 4 cm
Package Weight0.322 kg
Detailed features and specifications of JIKONG BMS
Figure 2: Detailed Features and Specifications

Setup and Installation

Proper installation is crucial for the safe and efficient operation of your JIKONG BMS. Please follow these steps carefully. For detailed diagrams and specific cell configurations, refer to the provided wiring diagrams and the comprehensive user manual (PDF).

1. General Wiring Principles

  • Connect the B- terminal of the BMS to the negative terminal of the battery pack.
  • Connect the P- terminal of the BMS to the negative terminal of both the charger and the load.
  • Connect the balance wires (B1, B2, B3, ..., B+) to their respective cell positive terminals, starting from B1 (first cell positive) up to B+ (last cell positive). Ensure correct order and polarity.
  • Always connect the main power cables (B- and P-) before connecting the balance wires.
  • Double-check all connections before applying power.
General Wiring Diagram for JIKONG BMS
Figure 3: General Wiring Diagram

2. Specific Cell Configuration Wiring Diagrams

The JIKONG BMS supports various cell configurations. Refer to the specific diagram for your battery pack setup (e.g., 4S, 8S).

  • For 8S configuration: Refer to Figure 4.
  • For 7S configuration: Refer to Figure 5.
  • For 6S configuration: Refer to Figure 6.
  • For 5S configuration: Refer to Figure 7.
  • For 4S configuration: Refer to Figure 8.
  • For 3S configuration: Refer to Figure 9.
  • For 2S configuration: Refer to Figure 10.
  • For 1S configuration: Refer to Figure 11.
Wiring Diagram for 8S Battery Configuration
Figure 4: 8S Wiring Diagram
Wiring Diagram for 7S Battery Configuration
Figure 5: 7S Wiring Diagram
Wiring Diagram for 6S Battery Configuration
Figure 6: 6S Wiring Diagram
Wiring Diagram for 5S Battery Configuration
Figure 7: 5S Wiring Diagram
Wiring Diagram for 4S Battery Configuration
Figure 8: 4S Wiring Diagram
Wiring Diagram for 3S Battery Configuration
Figure 9: 3S Wiring Diagram
Wiring Diagram for 2S Battery Configuration
Figure 10: 2S Wiring Diagram
Wiring Diagram for 1S Battery Configuration
Figure 11: 1S Wiring Diagram

3. APP Installation

The JIKONG Smart BMS features APP support for iOS, Android, and HarmonyOS. Scan the QR code on the BMS unit or in Figure 12 to download the official application. The APP allows for monitoring battery status, adjusting parameters, and viewing protection events.

QR code for JIKONG BMS APP download
Figure 12: Scan QR Code for APP Download

Operating Instructions

Once installed and connected, the JIKONG Smart BMS actively manages your battery pack.

1. Active Balance Function

The BMS features an active balance function with a 0.6A balance current. This system continuously monitors individual cell voltages and redistributes energy to ensure all cells maintain a similar state of charge, prolonging battery life and improving overall pack performance.

2. Protection Features

The BMS provides comprehensive protection for your battery:

  • Overcharge Protection: Prevents cells from being charged beyond their safe voltage limit.
  • Over Discharge Protection: Stops discharge when cells reach their minimum safe voltage, preventing damage.
  • Overcurrent Protection: Disconnects the load if the current draw exceeds safe limits.
  • Short Circuit Protection: Immediately cuts off power in case of a short circuit.
  • Temperature Protection: Monitors battery temperature and initiates protection measures if temperatures exceed safe operating ranges during charging or discharging.

3. APP Monitoring and Control

Use the JIKONG APP to:

  • Monitor real-time cell voltages, total pack voltage, and current.
  • View battery temperature.
  • Check the state of charge (SOC) and health (SOH) of your battery pack.
  • Access historical data and protection event logs.
  • Adjust certain BMS parameters (refer to the APP interface and PDF manual for available settings).

Maintenance

The JIKONG Smart BMS is designed for low maintenance. However, regular checks can ensure optimal performance and longevity.

  • Visual Inspection: Periodically inspect the BMS and all wiring for any signs of damage, corrosion, or loose connections.
  • Software Updates: Check the JIKONG APP regularly for firmware updates for your BMS. Keeping the firmware updated ensures you have the latest features and bug fixes.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. Avoid exposure to moisture, dust, and extreme temperatures.
  • Cleaning: If necessary, gently clean the BMS with a dry, soft cloth. Do not use liquids or abrasive cleaners.

Troubleshooting

If you encounter issues with your JIKONG BMS, refer to the following common problems and solutions. For more complex issues, consult the full user manual (PDF) or contact technical support.

ProblemPossible CauseSolution
BMS not powering on / No outputIncorrect wiring, loose connections, battery pack voltage too low, BMS in protection mode.
  • Verify all wiring according to the diagrams (Figures 3-11).
  • Check battery pack voltage; ensure it's above the undervoltage protection threshold.
  • Inspect all connections for tightness.
  • If in protection mode, identify the cause (e.g., over-discharge, overcurrent) and rectify.
Cells out of balanceInitial cell voltage differences, prolonged imbalance, faulty balance wire connection.
  • Allow the BMS to operate for some time; the active balance function should correct minor imbalances.
  • Ensure balance wires are correctly connected and not damaged.
  • For significant initial imbalances, consider pre-balancing cells before connecting to the BMS.
Overcurrent protection trips frequentlyLoad current too high, short circuit, faulty load.
  • Reduce the load or use a BMS with a higher continuous discharge current rating.
  • Check the load for any short circuits or malfunctions.
APP not connecting to BMSBluetooth/Wi-Fi issue, incorrect APP version, BMS not powered.
  • Ensure BMS is powered and within range.
  • Verify Bluetooth/Wi-Fi is enabled on your device.
  • Download the latest version of the JIKONG APP using the QR code (Figure 12).
  • Restart the APP and/or your device.

User Tips

  • Initial Balance: For new battery packs, it's recommended to individually balance cells to within 0.05V before connecting the BMS for optimal performance and faster initial balancing.
  • Cable Sizing: Always use appropriately sized wires for your main battery connections (B- and P-) to handle the maximum charge and discharge currents without excessive voltage drop or overheating.
  • Secure Mounting: Mount the BMS securely in a location that is protected from physical damage, moisture, and excessive heat. Ensure adequate airflow if possible.
  • Regular Monitoring: Utilize the JIKONG APP to regularly monitor your battery pack's health. This can help identify potential issues early.

Frequently Asked Questions (FAQ)

Q: What is the purpose of an active balance BMS?
A: An active balance BMS redistributes energy between cells to ensure they maintain similar voltage levels, which is crucial for maximizing battery pack capacity, extending lifespan, and preventing damage from overcharge or over-discharge of individual cells.
Q: Can I use this BMS with different battery chemistries?
A: This JIKONG BMS is specifically designed for LiFePO4, Li-ion, and LTO batteries. Using it with other chemistries may lead to improper operation or damage.
Q: How do I know if my BMS is working correctly?
A: You can monitor the BMS status, individual cell voltages, and overall battery parameters using the JIKONG mobile application. Normal operation will show balanced cell voltages and no active protection alerts.
Q: What does "Common Port BMS" mean?
A: A Common Port BMS uses the same set of terminals (P-) for both charging and discharging the battery pack. This simplifies wiring compared to separate port BMS designs.

Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official JIKONG user manual (PDF) available for download at JIKONG User Manual (PDF) or contact JIKONG customer service directly.

The product is certified with CE, FCC, and RoHS standards, ensuring compliance with relevant safety and environmental regulations.

© 2024 JIKONG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.