1. Introduction
The ISDT C4 Air is a versatile 6-bay smart battery charger designed for a wide range of rechargeable batteries, including AA, AAA, and various Li-ion types. It features a convenient USB Type-C input, independent charging slots, and an intelligent cooling system. With its accompanying mobile application, users can monitor charging status and perform firmware updates, ensuring optimal performance and battery health.

2. Package Contents
Please check the package for the following items:
- ISDT C4 Air Smart Battery Charger
- USB Type-C Cable
- User Manual (this document)

3. Setup
3.1 Power Connection
- Connect the provided USB Type-C cable to the charger's input port.
- Connect the other end of the USB Type-C cable to a compatible power source (e.g., a USB wall adapter, power bank, or computer) that supports QC/PD fast charging protocols. The charger supports a maximum input power of 40W and an operating voltage range of 5-12V.

3.2 Battery Insertion
The C4 Air features a 6-slot design with two vertical slots and four horizontal slots. These slots operate independently.
- Horizontal Slots: Designed for smaller batteries like AA and AAA. Maximum size supported is 51mm.
- Vertical Slots: Designed for larger cylindrical batteries such as 18650, 21700, 26650. Maximum size supported is 72mm.
Insert batteries into the appropriate slots, ensuring correct polarity (+ and - terminals).




4. Operating Instructions
4.1 Automatic Battery Detection and Charging
Upon inserting a battery, the C4 Air automatically detects the battery type (NiMH, NiZn, LiLon, LiFe, LiHv) and its parameters to configure the exclusive charging settings. Each of the 6 slots operates independently, allowing for simultaneous charging of different battery types and sizes without affecting each other.
- Maximum charging current: 4A for vertical slots, 2A for horizontal slots.
- Charging current range: 0.1-2.0A (horizontal), 0.1-4.0A (vertical).
4.2 Status Indication
The charger provides clear sound and light indications for various statuses:
- Indicator Lights: Show standby, charging, and charging completion status.
- Prompt Sounds: Indicate battery detection, charging completion, and fault alarms.

4.3 APP Connection and Monitoring
The ISDT C4 Air can connect wirelessly to a mobile application (iSDLink App) for enhanced monitoring and control. This allows you to:
- View real-time charging status for each bay.
- Monitor battery chemistry, charge current, and capacity.
- Perform Over-The-Air (OTA) firmware upgrades to ensure the charger always has the latest features and best performance.
Scan the QR code below to download the iSDLink App:


5. Maintenance
5.1 Cleaning
To maintain optimal performance, keep the charger clean. Use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals or abrasive materials.
5.2 Cooling System
The ISDT C4 Air incorporates a micro fan to ensure efficient cooling, allowing the charger to operate at full speed (up to 4A) without overheating. Ensure the fan vents are not obstructed to allow for proper airflow.


6. Troubleshooting and Safety
The ISDT C4 Air is equipped with multiple safety protections to ensure safe charging:
- Battery Parameter Detection: Automatically identifies battery type and optimal charging parameters.
- Battery Type Detection: Prevents incorrect charging protocols.
- Overcharge Protection: Stops charging once the battery reaches full capacity.
- Short Circuit Protection: Protects against accidental short circuits.
- Reverse Connection Protection: Prevents damage from incorrectly inserted batteries.
- Over Temperature Protection: Monitors internal temperature and reduces charging current or stops charging if it gets too hot.
- Overtime Protection: Prevents prolonged charging that could damage batteries.

Common Issues:
- Charger not powering on: Ensure the USB Type-C cable is securely connected to both the charger and a compatible power source. Verify the power source is active and provides sufficient power (5-12V, up to 40W).
- Battery not charging: Check that the battery is inserted with correct polarity. Ensure the battery type is supported by the charger.
- App connection issues: Make sure Bluetooth is enabled on your smartphone and the iSDLink app is installed and updated.
7. Specifications
| Feature | Detail |
|---|---|
| Model | C4 Air |
| Maximum Input Power | 40W |
| Number of Battery Bays | 6 (2 vertical, 4 horizontal) |
| Supported Battery Sizes | AAA, AA, 10440, 10500, 12500, 13500, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 |
| Max Horizontal Slot Size | 51mm |
| Max Vertical Slot Size | 72mm |
| Supported Battery Types | NiMH, NiZn, LiLon, LiFe, LiHv |
| Operating Voltage Range | 5-12V (Compatible with QC/PD protocols) |
| Charging Current Range (Horizontal) | 0.1-2.0A |
| Charging Current Range (Vertical) | 0.1-4.0A |
| Operating Temperature | 0-40°C |
| Dimensions (L x W x H) | 106 x 73 x 29mm |
| Weight | 115g |
| Material | Metal |
8. User Tips
- Gentle Status Lights: The charger features subtle status lights that are less disruptive, especially in low-light environments.
- Li-ion Cut-off Voltage: For users who prefer to prolong Li-ion battery life, consider that the lowest adjustable cut-off voltage in the app is typically 4.1V. If a 4.0V cut-off is desired, this functionality might not be directly available through the current app settings.
- Advanced Functionality: Note that while it's a smart charger with app connectivity, some advanced functionalities like discharge and refresh cycles might not be present.
9. Warranty and Support
The ISDT C4 Air Smart Battery Charger comes with a 12-month manufacturer's limited warranty for defective items. This warranty covers manufacturing defects and issues arising from normal use within the warranty period.
For warranty claims or technical support, please contact the retailer or manufacturer with your purchase details and a description of the issue. Defective items must be reported and returned within the warranty period, preferably in their original packaging.