1. Introduction
Thank you for choosing the LOOKcam USB Power Strip WiFi Camera. This device combines a functional 5-port USB charging station with a discreet, high-definition home security camera. Its ultra-portable design allows for versatile application, bringing convenience and security to your daily life. Please follow these instructions carefully to set up and operate your camera correctly.
This product is designed for security monitoring and features a powerful 5-port USB charging station with a total power output of 60 watts.

Image: The LOOKcam USB Power Strip WiFi Camera, a black device with multiple USB ports, designed for discreet surveillance.
2. Safety and Compliance Information
⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
3. Setup Guide
3.1. Powering On/Off
- To turn on the camera, press the ON/OFF key.
- To turn off the camera, press and hold the ON/OFF key for 3 seconds.
3.2. Resetting the Camera
If you are unsure of the camera's current mode or need to restore factory settings:
- While the camera is on, press the Reset key for 5 seconds to restart the camera and restore factory settings.
- This reset procedure is effective only when the blue indicator light is always on or flashing slowly.
- Press the Reset key for approximately 5 seconds until all indicator lights turn off. Release the key and wait for about 30 seconds for the camera to restart.
3.3. Downloading the LOOKcam App
The LOOKcam app is essential for controlling and viewing your camera. You can download it using one of the following methods:
- Method 1: Scan QR Code
Scan the QR code provided in the original manual (Figure 1) to access the download page (Figure 2). Select the appropriate software version for your mobile phone's operating system (Android or iOS). You can also download the computer client from the address: http://lookcam.ffvv.xyz:8800/lookcam_download.html. - Method 2: Search App Stores
For Android devices, search for "LOOKCAM" on Google Play and install the app. For Apple (iPhone/iPad) devices, search for "LOOKCAM" in the App Store and install it.
After successful download and installation, the LOOKcam app icon will appear on your mobile phone.
3.4. Point-to-Point Connection (Direct Connection)
To establish a direct connection between your mobile phone and the camera:
- Go to your mobile phone's Wi-Fi settings.
- Find the Wi-Fi network broadcast by the camera. It will typically appear as a UID number (e.g., B000534CBMXR).
- Connect to this Wi-Fi network.
- Once connected, open the LOOKcam app. The app will display the device as "Device Online".
- You can now view the camera feed in point-to-point mode. If prompted with a "Tip" dialog asking to connect to Wi-Fi network, click "Cancel" for point-to-point viewing.
3.5. Remote Viewing Setup (Wi-Fi Configuration)
To enable remote viewing via your home Wi-Fi network:
- Ensure you can view the camera in point-to-point mode (as described above).
- Return to the previous level in the app (My Device list).
- Click on the setup icon (gear icon) next to your device in the app.
- Navigate to Advanced Configuration > WiFi Connection Configuration.
- The app will scan for available Wi-Fi networks. Select your home Wi-Fi network (SSID).
- Enter the correct Wi-Fi password for your network.
- Click OK. The camera will automatically restart (this may take about 40 seconds).
- After restarting, the camera's status in the app should change from "offline" to "online", indicating successful remote connection.
Important Note: When connecting to remote Wi-Fi, ensure you enter the correct password. An incorrect password will cause the camera to restart automatically but fail to come online. In such cases, you will need to reset the camera and re-pair it.
4. Operating Instructions
4.1. Indicator Lights
- Red Light: Power indicator. Always on when the device is powered.
- Blue Light: Wi-Fi indicator.
- Flashes slowly: Point-to-point mode.
- Always on: Remote camera configuration completed (connected to your home Wi-Fi).
4.2. App Interface Controls
When viewing the live feed in the LOOKcam app, you will find various controls:
- Brightness Adjustment: Adjust the video brightness.
- Adjusting Contrast: Modify the video contrast.
- Night Vision ON/OFF: Toggle night vision mode.
- LED Light ON/OFF: Control any integrated LED lights.
- Resolution Rate: Select video resolution (e.g., 1080P, 720P).
- Video Record: Start or stop video recording.
- Snapshot: Capture a still image from the live feed.
- Microphone ON/OFF: Enable or disable audio recording.
- Speaker ON/OFF: Enable or disable audio playback from the camera.

Image: Front view of the USB Power Strip Camera, highlighting the USB-A and USB-C charging ports.
4.3. Motion Detection
The camera features intelligent motion detection. You can manually adjust the sensor sensitivity within the app. When motion is detected, the camera will send a push notification with an image to your phone, allowing you to log in to the app and view real-time activity.
4.4. Loop Recording
When an SD card is inserted and enabled, the camera supports loop recording. This means that when the SD card storage is full, the newest video files will automatically overwrite the oldest ones, ensuring continuous recording.
5. Maintenance
5.1. Micro SD Card Usage
- The camera supports Micro SD cards up to 128 GB.
- For optimal performance, use a High Speed Class 10 FAT formatted memory card.
- You must format the Micro SD card before its first use with the camera.
- If the SD card is not recognized after insertion, remove it and re-insert it firmly.
6. Troubleshooting
If you encounter issues with your camera, refer to the following common problems and solutions:
- Why can't the camera go online?
- Check if the camera is powered on.
- Verify that your Wi-Fi router is functioning correctly.
- Ensure the camera is within range of a strong Wi-Fi signal.
- Confirm that the Wi-Fi password entered during setup is correct.
- Why is remote monitoring not smooth?
Choose a suitable video resolution in the app that matches your internet speed for smoother viewing.
- Why can't I save to my SD card?
The SD card must be formatted before its first use with the camera. Ensure it is a Class 10 FAT formatted card.
- How do I recover if I forgot my password?
Press the reset key for 10 seconds to restore the camera to factory settings. The initial password will then be 123456.
- What is the initial password?
The initial password for each camera is 123456. It is highly recommended to change this password immediately after setup to ensure the security of your camera.
- If the camera cannot be connected to the router:
Please reset the camera and connect to its direct hotspot first before attempting to complete the Wi-Fi configuration again.
7. Specifications
| Feature | Specification |
|---|---|
| Resolution Ratio | 4K/2K/1080P/720P |
| Video Format | AVI |
| Frame Number | 25 FPS |
| Viewing Angle | 90 degrees |
| Motion Detection Distance | 6 meters (straight line) |
| Minimal Illumination | 1 LUX |
| Continuous Recording Time | 24 hours |
| Compressed Format | H.264 |
| Recording Range | 5 m² |
| Power Consumption | 240MA/3.7V |
| Storage Temperature | -20 to 80 degrees Celsius |
| Operating Temperature | -10 to 60 degrees Celsius |
| Operating Humidity | 15-85% RH |
| Memory Card Type | TF card (supports up to 128GB, Class 10 FAT formatted) |
| Player Software | VLCPlayer/SMPlayer |
| Computer Operating System | Windows/Mac OS X |
| Mobile Operating System | Android/iOS |
| Web Browser Support | IE7 and above, Chrome, Firefox, Safari, etc. |
| App Name | LOOKcam |
8. User Tips
- Discreet Design: The camera is designed to be discreetly integrated into the USB power strip. While the lens is small, its visibility depends on lighting and viewing angle.
- Audio Recording: The camera supports audio recording, which can be enabled or disabled via the microphone ON/OFF control in the LOOKcam app.
- Optimal Performance: For best remote viewing experience, ensure a stable internet connection and select a video resolution appropriate for your network speed.
- Security: Always change the default password (123456) immediately after setting up your camera to protect your privacy.
9. Warranty and Support
We conduct strict testing on the characteristics of each item before delivery to ensure quality. We welcome valuable suggestions for our cameras to continuously optimize product quality and after-sales service. If you need any assistance or have questions, please contact our customer support.
For additional guidance, you may refer to the original user manual PDF available at: User Manual (PDF).
10. Product Overview Video
Video: A general overview of the Multi-function USB Power Strip WiFi Camera, demonstrating its features and appearance.