1. Introduction
The Vgate VLinker BM+ and VLinker BM are advanced OBD2 diagnostic scanners designed to provide comprehensive vehicle diagnostics. These devices connect to your vehicle's On-Board Diagnostics (OBD-II) port and communicate wirelessly via Bluetooth with your iOS or Android smartphone or tablet. They are specifically optimized for BMW models using applications like BimmerCode and BimmerLink, but also support a wide range of other OBD-II compliant vehicles.

Figure 1: Vgate VLinker BM+ Diagnostic Tool
2. Features
The Vgate VLinker BM series offers a robust set of features for vehicle diagnostics and customization:
- Read/Clear DTC: Read and clear Diagnostic Trouble Codes (DTCs) from your vehicle's control units.
- Engine RPM: Monitor real-time engine Revolutions Per Minute.
- Remote Control: Access and control various vehicle functions remotely via compatible apps.
- Regeneration: Initiate Diesel Particulate Filter (DPF) regeneration processes.
- Automatic Sleep/Start: The device automatically enters sleep mode when not in use and wakes up upon vehicle activity.
- Battery Tester: Perform basic battery health checks.
- Module Reset: Reset specific vehicle modules.
- Module Activation: Activate or deactivate certain vehicle modules.
- Bluetooth Connectivity: VLinker BM+ uses Bluetooth 4.0 (BLE) for iOS and Android; VLinker BM uses Bluetooth 3.0 for Android.
- Software Update: Supports free firmware updates for continuous improvement.
- Multi-language Support: The device supports multiple languages, typically following your phone's language settings.

Figure 2: Key Functions of Vgate vLinker BM+
3. Compatibility
3.1. Supported BMW Models
The Vgate vLinker BM+ is specifically designed for a wide range of BMW models, including:
- BMW 1 Series: F20, F21
- BMW 2 Series: F22, F23, F87, Active Tourer F45, Gran Tourer F46
- BMW 3 Series: F30, F31, F34, F35, F80
- BMW 4 Series: F32, F33, F36, F82, F83
- BMW 5 Series: F07, F10, F11, F18, F90, G30, G31
- BMW 6 Series: F06, F12, F13
- BMW 7 Series: F01, F02, F03, F04, G11
- BMW X Series: X1 F48, X2 F39, X3 F25, X3 G01, X4 F26, X5 F15, F85, X6 F16, F86
- BMW i Series: i3, i8
- Mini: F54, F55, F56, F57, F60

Figure 3: Supported BMW Models
3.2. General Car Compatibility
The device supports all OBD-II protocols, making it compatible with most vehicles manufactured after the following years:
- American Cars: 1996 and newer (including Brazil)
- European Cars: 2001 and newer
- Asian Cars: 2005 and newer (including Australia)
- Russian Cars: Specific models like Ssangyong (2007-2017) and LADA (2008-2017)
To confirm if your vehicle is OBD-II compliant, look for a sticker under the hood labeled