Introduction
The JYX T27 is a versatile and portable wireless Bluetooth karaoke speaker designed for both home and outdoor entertainment. Featuring dual wireless microphones, vibrant LED lights, and multiple connectivity options, it delivers a powerful and immersive audio experience for parties, gatherings, and singing sessions. This manual provides detailed instructions for setting up, operating, and maintaining your JYX T27 karaoke machine.

Figure 1: JYX T27 Karaoke Machine and Accessories
Package Contents
Please check the package carefully to ensure all items are present:
- 1 x JYX T27 Karaoke Speaker Unit
- 2 x Wireless Microphones
- 1 x Remote Control
- 1 x Shoulder Strap
- 1 x AUX Audio Cable
- 1 x USB Type-C Charging Cable
- 1 x User Manual (this document)
Video 1: JYX T27 Product Overview and Features
Product Overview
Controls and Ports

Figure 2: Top Panel Controls and Rear Ports
- EQ Button: Adjusts equalization settings.
- Power ON/OFF & Light Switch: Powers the unit on/off and cycles through LED light modes.
- Connect Mode Button: Switches between Bluetooth, USB, TF Card, and AUX input modes.
- Previous Song / Volume Down: Short press for previous song, long press to decrease volume.
- Play/Pause Button: Short press to play/pause, long press to initiate TWS pairing.
- Next Song / Volume Up: Short press for next song, long press to increase volume.
- MIC/Echo/Master Volume Switch: Cycles through microphone volume, echo level, and master volume adjustments.
- MIC Input (x2): Connect wired microphones (if desired, though wireless mics are included).
- USB Port: For USB disk playback.
- TF Card Slot: For TF card playback.
- AUX Input: For wired audio connection.
- Charging Port: USB Type-C port for charging the speaker.
Wireless Microphones

Figure 3: Wireless Microphones
- Low Latency for clear vocal delivery.
- HD Sound quality.
- Noise Reduction technology.
- Anti-interference design for stable performance.
- Long Range Connection (up to 30 meters).
- Requires AA batteries (not included).
Setup
Initial Charging
Before first use, fully charge the speaker. Connect the provided USB Type-C charging cable to the speaker's charging port and a suitable USB power adapter (not included). The charging indicator will show the charging status. A full charge typically takes 3-5 hours and provides over 24 hours of battery life on a full charge.
Powering On/Off
Press and hold the Power ON/OFF button (2) on the top panel to turn the speaker on or off.
Microphone Setup
Insert AA batteries (not included) into each wireless microphone. Turn on the microphones. They should automatically pair with the speaker. If not, refer to the Troubleshooting section.
Operating Instructions
Connecting Audio Sources

Figure 4: Available Connectivity Options
- Bluetooth Mode:
Press the "Connect Mode" button (3) until "BLUE" appears on the display. On your device (smartphone, tablet, PC, etc.), enable Bluetooth and select "JYX T27" from the list of available devices. The speaker will indicate a successful connection.

Figure 5: Bluetooth 5.3 Connectivity
- USB Disk Mode:
Insert a USB disk into the USB port (9). The speaker will automatically switch to USB mode and begin playing audio files. If not, press the "Connect Mode" button (3) to select USB mode.
- TF Card Mode:
Insert a TF card into the TF card slot (10). The speaker will automatically switch to TF card mode and begin playing audio files. If not, press the "Connect Mode" button (3) to select TF card mode.
- AUX Input Mode:
Connect an external audio device (e.g., TV, MP3 player) to the AUX input port (11) using the provided AUX cable. Press the "Connect Mode" button (3) to select AUX mode.

Figure 6: AUX or Bluetooth Connection to TV
Audio Playback Controls
- Play/Pause: Short press the Play/Pause button (5).
- Next Song: Short press the Next Song/Volume+ button (6).
- Previous Song: Short press the Previous Song/Volume- button (4).
- Volume Up: Long press the Next Song/Volume+ button (6).
- Volume Down: Long press the Previous Song/Volume- button (4).
Sound Effects Adjustment
- EQ: Press the EQ button (1) to cycle through different equalization presets.
- Microphone/Echo/Master Volume: Press the MIC/Echo/Master Volume Switch (7) to select the parameter you wish to adjust (microphone volume, echo level, or master volume), then use the Volume+/- buttons (4, 6) to make adjustments.
TWS (True Wireless Stereo) Pairing
The TWS function allows you to connect two JYX T27 speakers wirelessly for a true stereo sound experience.
- Ensure both JYX T27 speakers are powered on and in Bluetooth mode, but not connected to any other device.
- On one of the speakers (this will be the primary speaker), long press the Play/Pause button (5) until you hear a prompt indicating TWS pairing mode.
- The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound.
- Now, connect your Bluetooth device to the primary speaker as described in the "Bluetooth Mode" section. Audio will play through both speakers in stereo.

Figure 7: TWS Dual Speaker Connection
Microphone Usage
The JYX T27 comes with two wireless microphones for karaoke. Ensure they have fresh AA batteries installed and are powered on. They should automatically connect to the speaker.
- Adjust microphone volume and echo effect using the MIC/Echo/Master Volume Switch (7) on the speaker.
- The speaker features microphone priority mode, which automatically lowers background music when you speak into the microphone.
- For an enhanced singing experience, utilize the auto pitch correction feature.
LED Light Modes
The JYX T27 features dynamic RGB LED lights that sync with the rhythm of the music, creating a vibrant party atmosphere.
- Short press the Power ON/OFF & Light Switch button (2) to cycle through different light modes or turn the lights off.

Figure 8: Colorful Atmosphere Disco Light
Charging
The JYX T27 is equipped with a 6000mAh rechargeable battery, providing extended playtime.
- Connect the USB Type-C charging cable to the speaker's charging port (12) and a standard USB power adapter (5V/2A recommended, not included).
- The LED indicator on the speaker will show the charging status.
- A full charge takes approximately 3-5 hours.
- Once fully charged, the speaker can provide over 24 hours of continuous music playback (actual time may vary based on volume and light usage).

Figure 9: Battery and Playtime Information
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
- Water Resistance: While the product is listed as waterproof, avoid submerging it in water or exposing it to heavy rain to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Speaker won't turn on | Low battery; Power button not pressed correctly | Charge the speaker fully; Press and hold the power button for a few seconds. |
| No sound from speaker | Volume too low; Incorrect input mode; Device not connected | Increase speaker and device volume; Press "Connect Mode" to select correct input; Ensure Bluetooth/AUX/USB/TF connection is secure. |
| Microphones not working | Microphone batteries low/dead; Microphones not powered on; Microphone volume too low | Replace AA batteries; Turn on microphones; Adjust microphone volume using the MIC/Echo/Master Volume Switch (7). |
| Bluetooth connection unstable/disconnects | Device too far from speaker; Interference; Speaker already connected to another device | Move device closer to speaker (within 30m); Avoid obstacles; Disconnect from other devices and re-pair. |
| TWS pairing fails | Speakers not in pairing mode; Already connected to a device | Ensure both speakers are in Bluetooth mode and not connected to any device. Long press Play/Pause on one speaker to initiate TWS pairing. |
Specifications
| Feature | Detail |
|---|---|
| Model | T27 |
| Brand | JYX (also listed as FanFun) |
| Speaker Type | Portable |
| Audio Crossover | Full-Range |
| Loudspeaker Enclosure | 1 main unit with 2 x 6.5 inch subwoofers |
| Subwoofer Power | 2 x 40W |
| Input Power | <25 W |
| Frequency Response | 20Hz-20kHz |
| Communication | Bluetooth 5.3, AUX, USB, TF Card |
| Bluetooth Range | Up to 30 meters (microphones) |
| Battery Capacity | 6000mAh |
| Playing Time | Up to 24+ hours |
| Charging Time | 3-5 hours |
| Voice Control | Yes |
| Waterproof | Yes |
| Support APP | Yes |
| Cabinet Material | Plastic |
| Dimensions (Approx.) | Length: 54 cm, Width: 26 cm, Height: 26 cm |
| Weight (Approx.) | 5.14 kg |
User Tips
- For the best karaoke experience, place your phone or tablet in the designated placeholder on the speaker to display lyrics. Note that the display screen itself is not included.
- Always ensure the wireless microphones have fresh AA batteries for uninterrupted performance.
- When using TWS mode, make sure both speakers are fully charged and not connected to any other Bluetooth devices before initiating the pairing process.
- Experiment with the EQ settings and microphone effects (echo, volume) to find your preferred sound for different music genres or vocal styles.
Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.