CTG421 CTG421

Modern Smart Bedside Table

Model: CTG421

1. Product Overview

This modern bedside table combines minimalist design with smart functionality, making it an ideal addition to any bedroom. It features a motion-activated sensor light, silent soft-close drawers, and ample storage, all crafted from durable solid wood multi-layer board with an environmentally friendly paint finish.

Front view of the Modern Smart Bedside Table
Front view of the Modern Smart Bedside Table.
Bedside table in a bedroom setting with a lamp and speaker
The bedside table integrated into a bedroom environment.

2. Package Contents

Please check the package for the following items:

  • Bedside Table Main Body
  • Drawer(s)
  • Cabinet Door(s)
  • Table Legs (4x)
  • Assembly Hardware (screws, Allen wrench, etc.)
  • User Manual (this document)

3. Setup Instructions

Follow these steps to assemble your bedside table:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components listed in Section 2 are present.
  2. Attach Legs: Securely attach the four table legs to the bottom of the main body using the provided screws and Allen wrench. Ensure they are tightened firmly for stability.
  3. Insert Drawers: Slide the drawer(s) into their designated slots. The self-priming drawer slides should allow for smooth insertion.
  4. Install Cabinet Door(s): If applicable, attach the cabinet door(s) using the hinges and screws provided. Adjust hinges as needed for proper alignment.
  5. Positioning: Place the bedside table in your desired location. Ensure it is on a level surface.
Bedside table with legs, illustrating assembly points
Illustration of the bedside table structure, indicating leg attachment.

4. Operating Instructions

4.1 Motion Sensor Light

The bedside table is equipped with a smart motion sensor light:

  • Automatic Activation: The light will automatically turn on when motion is detected within approximately 3 meters.
  • Automatic Deactivation: The light will turn off automatically when no motion is detected for a period.
  • Soft Illumination: The light provides a soft glow, designed not to disturb sleep.
  • Adjustable Angle: The sensor light's angle can be adjusted for convenience, especially during nighttime use.
Close-up of the motion sensor light on the bedside table
The motion sensor light activates automatically upon detection.
Bedside table with sensor light on, showing soft illumination
The sensor light provides soft, non-disruptive illumination.

4.2 Silent Soft-Close Drawers

The drawers are designed with self-priming, slow-rebound nylon slide rails for quiet and gentle closing. Simply push the drawer gently, and it will smoothly close itself.

Drawer with soft-close mechanism
Demonstration of the soft-close drawer mechanism.

4.3 Storage Space

The bedside table offers ample storage with its drawer and lower cabinet space, helping to keep your bedroom tidy and organized.

Bedside table with drawer and cabinet open, showing storage capacity
View of the open drawer and cabinet, highlighting storage space.

5. Maintenance

  • Cleaning: Wipe the surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the environmentally friendly paint finish.
  • Dusting: Regularly dust the table to maintain its appearance.
  • Under-table Cleaning: The elevated design of the table legs allows for easy cleaning underneath, including access for robot vacuums.
Bedside table with a robot vacuum underneath, showing easy cleaning access
The elevated design facilitates easy cleaning underneath the table.
Close-up of the table surface, highlighting the paint quality
The table features an international quality, odor-purifying paint finish.

6. Troubleshooting

  • Sensor Light Not Activating:
    • Ensure the sensor area is not obstructed.
    • Check if the ambient light is too bright, as some sensors have a light-sensing feature to prevent activation during daylight.
    • Verify the power source (if battery-operated, check batteries; if wired, check connection).
  • Drawer Sticking/Not Closing Smoothly:
    • Check for any obstructions inside the drawer or along the slide rails.
    • Ensure the drawer is properly aligned on its rails.
    • Clean the drawer rails to remove any dust or debris.
  • Table Instability:
    • Ensure all leg screws are securely tightened.
    • Place the table on a flat, even surface.

7. Specifications

Feature Detail
Model CTG421
Material Solid Wood Multi-layer Board (Organic Material)
Dimensions (H x W x D) 56 cm x 45 cm x 40 cm
Leg Height 12 cm
Weight 7.0 kg
Color Black (body), Green (drawer front)
Smart Features Motion-activated sensor light (3m range, 0-second activation)
Drawer Mechanism Self-priming, slow-rebound nylon slide rails (soft-close)
Finish Environmentally friendly, odor-purifying paint
Diagram showing the dimensions of the bedside table
Detailed dimensions of the bedside table.
Close-up of the wood material, highlighting its quality
The table is constructed from selected solid wood multi-layer board.

8. User Tips

  • Optimal Sensor Placement: For best performance of the motion sensor light, ensure the table is placed where the sensor has a clear line of sight to areas of movement, such as beside your bed or a doorway.
  • Maximizing Storage: Utilize the drawer for smaller, frequently accessed items and the cabinet for larger or less frequently used belongings to maintain a clutter-free space.
  • Gentle Drawer Use: While the soft-close mechanism is robust, avoid forcing drawers shut to prolong the life of the slide rails.

9. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical support or inquiries, you may contact the seller directly using the following information:

  • WeChat (WX): 15874218785
  • WhatsApp: 15874218785
Image showing contact information for support
Contact details for customer support.
Documents - CTG421 – CTG421

no relevant documents