TRANSFORMERS TF-T10

Contents

TRANSFORMERS TF-T10 TWS Bluetooth 5.4 Earphones

User Manual

Introduction

The TRANSFORMERS TF-T10 TWS Bluetooth 5.4 Earphones are designed to provide a superior audio experience for both gaming and music. Featuring advanced Bluetooth 5.4 technology, low latency, and intelligent noise reduction, these earbuds offer stable connectivity, immersive sound, and clear communication. This manual provides detailed instructions on how to set up, operate, and maintain your TF-T10 earphones.

Package Contents

Please check the box for the following items:

  • 2 x Bluetooth Earphones (Left and Right)
  • 1 x Charging Case
  • 1 x USB Type-C Charging Cable
  • 1 x User Manual
  • 3 x Sizes of Ear Caps (S, M, L)

Specifications

Product parameters table

Image: Detailed product parameters including Bluetooth version, speaker size, and battery capacity.

TF-T10 Earphones Technical Specifications
Feature Specification
Product TypeTrue Wireless Bluetooth Headset
Bluetooth VersionV5.4
Speaker SizeΦ10mm
Transmission DistanceUp to 10 meters (33 feet)
Frequency Range2.402-2.480KHz (20 - 20000Hz)
Speaker Impedance32Ω
Microphone Sensitivity-38dB±3dB
Charging InterfaceType-C
Earphone Battery Capacity40mAh (each earbud)
Charging Case Capacity300mAh
Music PlaytimeApprox. 5.5 hours (earphones), Approx. 30 hours (with charging case)
Charging TimeApprox. 1.5 hours (earphones), Approx. 1.5 hours (charging case)
Max Output10mW
Total Harmonic Distortion1%
Sensitivity38dB
Sound IsolatingYes
CodecsAAC, SBC
Vocalism PrincipleDynamic
MaterialPlastic

Setup Instructions

1. Charging the Earphones and Case

Before first use, ensure both the earphones and the charging case are fully charged.

  • Place the earphones into the charging case.
  • Connect the charging case to a power source using the provided USB Type-C cable.
  • The charging indicator lights on the case will show the charging status.
  • A full charge for the earphones takes approximately 1.5 hours. The charging case also takes about 1.5 hours to fully charge.
Charging case with white earbuds and battery life details

Image: Large-capacity charging case providing long-lasting battery life, meeting your needs for a whole day. Shows approximately 30 hours of battery life with the charging case, 1.5 hours for charging the case, and 4-5 times the recharge capacity for the earbuds.

2. Bluetooth Pairing

  1. First-time Pairing:
    • Open the charging case. The earphones will automatically power on and enter pairing mode.
    • On your device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
    • Select "TRANSFORMERS TF-T10" from the list of devices.
    • Once connected, you will hear a confirmation tone.
  2. Automatic Reconnection: After the initial pairing, the earphones will automatically connect to the last paired device when taken out of the charging case, provided Bluetooth is enabled on your device.
Earbuds compatible with various devices

Image: TF-T10 earphones intelligently compatible with various devices, including Android, iOS, and Windows, ensuring stable Bluetooth connection.

Bluetooth 5.4 chip diagram

Image: Upgraded Bluetooth 5.4 chip ensuring stable and continuous connection.

3. Wearing the Earphones

  • Choose the ear caps that best fit your ears for optimal comfort and sound quality.
  • Insert the earphones gently into your ear canal and rotate them slightly to ensure a secure and comfortable fit.
  • The lightweight, skin-friendly, and ergonomic design allows for comfortable extended wear.

Operating Instructions

1. Power On/Off

  • Power On: Open the charging case, and the earphones will automatically power on.
  • Power Off: Place the earphones back into the charging case and close the lid. They will automatically power off and begin charging.

2. Dual Mode Switching (Music & Gaming)

The TF-T10 earphones feature seamless dual-mode switching between music and gaming modes, automatically transitioning without interruption.

Dual mode for music and gaming

Image: Low latency in gaming mode with dual mode dual decoding. Music mode offers pure bass performance, while Game mode provides low latency for crisper bass and enhanced hearing discrimination.

  • Music Mode: Enjoy pure bass performance and an immersive sound experience, making you feel like you're at a live concert.
  • Gaming Mode: Experience ultra-low latency (40ms) for crisper bass and enhanced hearing discrimination, allowing for radar-like accurate positioning in games.

3. Audio Features

  • 360-Degree Surround Sound: Immerse yourself in a realistic sound experience with no blind spots for sound positioning.
  • Hardcore Sound Quality: Utilizing digital frequency division ring iron units and a 10mm graphene biological diaphragm for high-precision reproduction and accurate detail representation, with treble and bass boost.
360-degree surround sound

Image: 360° surround sound for an immersive experience with low latency and accurate sound positioning.

10mm biological diaphragm diagram

Image: Three-band balanced analysis with a 10mm biological diaphragm. The graphene diaphragm restores good sound quality, featuring both treble and bass boost.

4. Call Functions

  • The earphones are equipped with a sensitive built-in microphone for smooth and clear HD calls.
  • Intelligent environmental noise reduction suppresses and reduces environmental noise, improving the call experience.
Earbuds with sensitive microphone for HD calls

Image: Earphones equipped with a sensitive microphone for smooth and clear HD calls, acting as an HD call group battle weapon.

Intelligent environmental noise reduction

Image: Intelligent environmental noise reduction to suppress and reduce environmental noise, improving the call experience.

5. Independent Use

The TF-T10 earphones support independent dual-host combat, meaning both earbuds can be used as main or auxiliary headphones. Simply pick up either earbud to use it.

Independent dual-host combat

Image: Independent dual-host combat feature, allowing both ears to be used as main and auxiliary headphones.

6. Volume Control

The earphones support volume control directly from the earbuds. Refer to the quick start guide or product packaging for specific touch controls for volume adjustment.

Maintenance

  • Keep the earphones and charging case clean and dry.
  • Wipe the earphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Avoid exposing the earphones to extreme temperatures, humidity, or direct sunlight.
  • Store the earphones in their charging case when not in use to protect them and keep them charged.

Troubleshooting

Q: Are the earphones comfortable to wear?
A: Yes, the headphones are designed to fit most people's ear sizes and provide comfort. Experiment with the three included ear cap sizes to find your best fit for optimal comfort and sound.
Q: Do they pair automatically with the phone after the first connection?
A: Yes, after the first successful pairing, the earphones will automatically connect to your device when taken out of the charging case, provided Bluetooth is enabled on your device.
Q: How long does it take to fully charge?
A: Generally, it takes about 1.5 hours to fully charge the earphones and about 1.5 hours to fully charge the charging case.
Q: Does this have a built-in microphone?
A: Yes, the TF-T10 earphones feature a built-in microphone for clear calls.
Q: Is sound leakage a serious issue?
A: As long as the volume is not at its maximum, there should be no significant sound leakage. For ear health, it is also recommended to avoid using maximum volume for extended periods.

User Tips

  • Optimal Fit: Take the time to try all three ear cap sizes to find the one that provides the best seal and comfort for your ears. A good seal enhances bass and noise reduction.
  • Gaming Advantage: Utilize the dedicated Gaming Mode for competitive play. Its low latency and enhanced sound discrimination can give you an edge by accurately pinpointing in-game sounds.
  • Battery Management: Always store your earphones in the charging case when not in use to keep them protected and ensure they are charged for your next use.
  • Call Clarity: For the clearest calls, ensure the microphone is not obstructed and consider your environment. The intelligent noise reduction helps, but a quieter setting is always best.

Warranty and Support

For any issues or questions not covered in this manual, please contact the seller or refer to the product's official support channels. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.