1. Introduction
The Bakon BK602 PRO is an all-in-one high-efficiency desoldering station, combining a soldering iron and a hot air gun in a compact design. It features a large HD screen for intuitive operation, a brushless vortex fan for efficient airflow, and accurate temperature control. This professional rework station is ideal for various applications, including removing IC parts like QFP, SOP, PLCC, SOJ, and general electronics repair.
Key features include automatic cooling for safety, three-level quick temperature adjustment, rapid heating, stable temperature, and compatibility with C115, C210, and C245 heating cores.

2. Important Safety Warnings
- Always wear appropriate personal protective equipment, including safety glasses, when operating the station.
- Ensure the workstation is well-ventilated to avoid inhaling fumes from soldering.
- The soldering iron tip and hot air gun nozzle reach very high temperatures. Avoid direct contact with skin or flammable materials.
- Place the hot air gun in its holder when not in use. The automatic cooling feature will activate.
- Do not operate the station near flammable liquids or gases.
- Always unplug the unit from the power source before performing any maintenance or changing components.
- Keep out of reach of children.
- Use only genuine replacement parts and accessories.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor.
- Host Unit * 1
- Power Cable * 1
- Hot Air Gun Handle * 1
- Hot Air Gun Holder * 1
- Nozzle * 2
- BK210-A Soldering Iron Handle * 1
- C210 Heating Core * 1
- Instruction Manual * 1
NOTE: This product is compatible with BK210-A, BK115-A, BK245-A handles, but the default configuration includes the BK210-A handle and C210 heating core. Please verify your requirements before use.
4. Setup
- **Unpacking**: Carefully remove all components from the packaging.
- **Placement**: Place the main unit on a stable, heat-resistant surface, ensuring adequate ventilation around the unit.
- **Connect Power Cable**: Connect the power cable to the main unit and then to a suitable power outlet (AC 230V 50Hz).
- **Install Hot Air Gun**: Insert the hot air gun handle into its designated port on the main unit. Place the hot air gun into its holder.
- **Install Soldering Iron**: Connect the soldering iron handle to its port.

Figure 2: Proper Soldering Iron Tip Installation and Removal - To install the heating core/tip, use the auxiliary mounting holes to protect the front end of the soldering iron.
- The heating core can be removed directly without waiting for the soldering tip to cool.
- **Install Nozzles**: Attach the desired nozzle to the hot air gun.
- **Integrated Tin Wire Frame**: If using, place a roll of tin wire onto the integrated tin wire frame for convenient access during soldering.
5. Operating Instructions
5.1 General Operation
- **Power On/Off**: Use the main power switch to turn the unit on or off.
- **Large HD Screen**: The large screen provides intuitive display of temperature, air volume, and other settings.

Figure 3: Intuitive Large HD Screen Display - **Quick Temperature Presets (CH1/CH2/CH3)**: The unit features three programmable channels (CH1, CH2, CH3) to store your preferred temperature and air volume settings for quick recall. Press the corresponding channel button to activate a preset.

Figure 4: Shortcut Keys for Temperature and Air Volume - **Combination Lock**: Secure your personalized settings with the combination lock feature to prevent accidental changes.

Figure 5: Combination Lock for Personalized Settings - **USB Output**: A 5V(3A) USB port is available for charging small electronic devices.
5.2 Soldering Iron Operation
- **Temperature Adjustment**: Use the up/down buttons to set the desired soldering temperature within the range of 150℃~480℃ (302℉~896℉).
- **Rapid Heating**: The soldering iron heats up rapidly, typically reaching operating temperature in about 3 seconds.

Figure 6: Rapid Heating and Stable Temperature of Soldering Iron - **Auto Sleep/Wake**: When the soldering iron is placed in its holder, it will automatically enter sleep mode after a set period (1-99 seconds, configurable), maintaining a constant temperature of 100°C/212°F for safety and power saving. Picking up the iron will automatically wake it up.

Figure 7: Automatic Cooling and Sleep Mode - **Tip Compatibility**: The station supports C115, C210, and C245 heating cores/handles, offering versatility for different soldering tasks.

Figure 8: Compatible Soldering Iron Handles
5.3 Hot Air Gun Operation
- **Temperature Adjustment**: Adjust the hot air gun temperature within the range of 100℃~500℃ (212℉~932℉).
- **Air Volume Adjustment**: Control the air volume from F01 to F17 to suit your rework needs.

Figure 9: Hot Air Gun Temperature and Air Volume Control - **Automatic Cooling**: When the hot air gun is placed in its holder, it will automatically cool down to a safe temperature before entering sleep mode (1-60 seconds, configurable). This prevents damage to the heating element and ensures safety.
- **Applications**: The hot air gun is suitable for desoldering, chip maintenance, main board maintenance, and mobile phone repair.

Figure 10: Wide Application Scenarios
6. Maintenance
- **Soldering Tip Cleaning**: Regularly clean the soldering iron tip using a damp sponge or brass wool to remove solder residue. This ensures efficient heat transfer and extends tip life.
- **Hot Air Gun Nozzle Cleaning**: Ensure hot air gun nozzles are free from debris. Clean them gently with a soft brush if necessary, only when the unit is cool and unplugged.
- **General Cleaning**: Wipe the main unit and handles with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- **Storage**: Store the unit in a dry, dust-free environment when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Power cable not connected, power outlet fault, internal fuse blown. | Check power cable connection. Test power outlet. If fuse is suspected, consult qualified technician. |
| "H-E" error displayed | The heating core is not installed correctly. | Ensure the heating core is properly seated in the soldering iron handle. Refer to the "Setup" section for correct installation. |
| Soldering iron not heating or unstable temperature | Loose heating core, damaged tip, incorrect temperature setting. | Check heating core installation. Replace tip if damaged. Verify temperature setting on display. |
| Hot air gun not heating or unstable airflow | Blocked nozzle, fan malfunction, incorrect settings. | Check for nozzle blockages. Ensure air volume is set correctly. If fan malfunction is suspected, contact support. |
8. Specifications
Host Unit
- Output Power: 670W (max)
- Input Voltage: AC 230V 50Hz
- USB Output Voltage: 5V(3A)
- Dimensions (L x W x H): 160mm x 165mm x 105mm (6.3in x 6.5in x 4.1in)
- Net Weight: ≈1.3kg
Hot Air Gun
- Output Power: 550W (max)
- Input Voltage: AC 230V 50Hz
- Temperature Range: 100℃~500℃ (212℉~932℉)
- Air Volume: 120L/min
- Heating Element: 953B Heating Core
Soldering Iron
- Output Power (Adaptive): C115/35W, C210/55W, C245/120W
- Input Voltage: AC 230V 50Hz
- Temperature Range: 150℃~480℃ (302℉~896℉)
- Temperature Stability: ±2℃ (±35.6℉)
- Handle Length: 126cm
- Tip to Ground Resistance: ≤2Ω
- Heating Element (Adaptive): C115/C210/C245
9. User Tips
- **Utilize Presets**: Save your most frequently used temperature and air volume settings to the CH1, CH2, and CH3 channels for quick and efficient switching between tasks.
- **Proper Tip Tinning**: Always tin your soldering iron tip before and after use to prevent oxidation and ensure optimal heat transfer.
- **Leverage Auto-Sleep**: The auto-sleep feature not only saves energy but also prolongs the life of your heating elements. Ensure the hot air gun is placed in its holder and the soldering iron is in its stand when not actively in use.
- **Correct Nozzle Selection**: Choose the appropriate hot air gun nozzle size for the component you are working on to ensure precise heating and prevent damage to surrounding parts.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the official Bakon customer service. Keep your purchase receipt as proof of purchase.