1. Introduction
The Bakon BK210 is an intelligent, portable lithium battery-powered electric soldering iron designed for precision soldering tasks. Featuring fast heating, PID temperature control, and a clear LED display, it offers convenience and efficiency for both professional and hobbyist use. Its compact design makes it highly portable for on-the-go repairs.
2. Important Notice: Battery Requirement
Battery is NOT INCLUDED in the package. You need to prepare your own 18650 flat head lithium battery. The battery capacity should not be less than 3000mAh.
Please pay close attention to the positive and negative poles when installing the lithium battery to avoid damaging the device due to incorrect installation.
3. Package Contents
The following items are included in your Bakon BK210 package:
- Soldering iron handle (main unit) x 1
- BC210S integrated heating core x 1
- Type-C charging cable x 1
- Solder wire x 1
- Soldering tip protective hose x 1
- Solder iron holder and cleaning sponge x 1
Video: Unboxing and overview of the Bakon BK210 Soldering Iron kit, demonstrating its components and basic functions.
4. Setup Instructions
4.1. Battery Installation
- Unscrew the rear cap of the soldering iron handle.
- Carefully insert the 18650 flat head lithium battery, ensuring correct polarity (positive electrode towards the front, negative electrode towards the rear). Refer to the internal diagram in the Important Notice section for guidance.
- Securely screw the rear cap back on.
Video: Demonstration of installing the 18650 lithium battery into the Bakon BK210, emphasizing correct polarity.
4.2. Heating Core Installation
- Gently push the BC210S integrated heating core into the front end of the soldering iron handle until it is firmly seated.
- Ensure the heating core is properly aligned and secured.
Video: Guide on how to install the BC210 integrated heating core into the soldering iron handle.
5. Operating Instructions
5.1. Power On/Off
- To power on: Long press the power button (middle button) until the display lights up.
- To power off: Long press the power button again.
Video: Demonstrates how to power on the soldering iron by long-pressing the power button.
5.2. Temperature Adjustment
- Use the 'Temperature +' button (left button) to increase the temperature.
- Use the 'Temperature -' button (right button) to decrease the temperature.
- Once the desired temperature is displayed, click the power button to confirm the setting. The iron will then heat up to the set temperature.
Video: Shows how to adjust the temperature using the '+' and '-' buttons and confirm the setting.
5.3. Quick Heating and Soldering
The BK210 features rapid heating, reaching soldering temperature and melting tin in approximately 10 seconds. It supports wireless welding and can also be used while charging via its Type-C interface.
Video: Demonstrates the rapid heating capability and quick tinning of the soldering iron.
Video: Illustrates how easily the Bakon BK210 can solder, highlighting its quick solder capabilities.
6. Parameter Settings
To enter the settings interface, press and hold both the 'Temperature +' and 'Temperature -' buttons simultaneously. Use the '+' and '-' buttons to navigate through the settings (F01-F04) and the power button to select/confirm.
Video: Guide on how to access and navigate the parameter settings of the Bakon BK210.
Available Settings:
- F01: Sleep Time Setting - Adjust the automatic sleep time from 2 to 99 seconds. The iron will automatically enter sleep mode if not moved for the set duration.
- F02: Unit Switching - Toggle between Celsius (°C) and Fahrenheit (°F) for temperature display.
- F03: Restore Default Settings - Reset all parameters to their factory default values.
- F04: Temperature Compensation Setting - Adjust temperature compensation within a range of ±80℃ to fine-tune accuracy.
7. Maintenance
7.1. Cleaning the Soldering Tip
- Always clean the soldering tip before and after use to ensure optimal performance and longevity.
- Use the included cleaning sponge (dampened with water) to wipe off excess solder and flux residue from the tip.
- Ensure the sponge is not overly wet to avoid thermal shock to the tip.
7.2. Storage
- Allow the soldering iron to cool completely before storing.
- Place the protective hose over the soldering tip to prevent accidental damage or injury.
- Store the device in a dry, safe place away from children.
8. Troubleshooting
- Soldering Iron Not Heating: Check if the battery is correctly installed with the right polarity and has sufficient charge. Ensure the heating core is properly seated.
- Inconsistent Temperature: Verify the temperature setting and consider using the temperature compensation feature (F04) if consistent discrepancies are observed.
- Poor Solder Joints: Ensure the soldering tip is clean and properly tinned. Check that the temperature is appropriate for the solder and components being used.
- Device Not Turning On: Confirm the battery is charged and correctly installed. Try charging the device using the Type-C cable.
9. Specifications
| Feature | Specification |
|---|---|
| Model Name | BK210 |
| Heating Cores | BC210S integrated heating core |
| Temperature Range | 180℃ - 450℃ |
| Temperature Stability | ±2℃ |
| Auto-Sleep Time | Adjustable from 2s - 99s |
| Temperature Compensation Range | ±80℃ |
| Power | 12W |
| Weight | 75g |
| Dimensions | Length 146mm |
| Charging Voltage | DC5V |
| Charging Connector | Type-C |
| Certification | CE, RoHS |
| Is Smart Device | No |
| Origin | Mainland China |
10. User Tips
- For optimal performance, always ensure your 18650 battery is fully charged before starting a soldering session.
- Experiment with different temperature settings to find the ideal heat for your specific solder and components.
- Utilize the automatic sleep function to conserve battery life and prolong the lifespan of the heating core.
- Keep the soldering tip well-tinned and clean to prevent oxidation and ensure efficient heat transfer.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the BAKON Official Store directly. Keep your purchase receipt as proof of purchase.
