1. Introduction
Thank you for choosing the POSEIDON V6 Wireless Tattoo Pen Kit. This manual provides detailed instructions for the safe and effective use of your new tattoo machine. Please read this manual thoroughly before operation and keep it for future reference.
2. Safety Information
General Safety Warnings
- WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance must only be supplied at safety extra-low voltage corresponding to the marking on it.
3. Package Contents
The POSEIDON V6 Wireless Tattoo Pen Kit typically includes the following items:
- POSEIDON V6 Tattoo Pen Machine
- Wireless Power Supply with Digital Display
- Cartridge Needles (various configurations)
- Tattoo Ink Set (if included in specific kit variant)
- Soothing Solution
- Practice Skin
- Transfer Paper
- Disposable Gloves
- Grip Tape
- USB-C Charging Cable
- Ink Cups
- Carrying Case
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | DTK126-HJH |
| Type | Tattoo Kits |
| Frame Material | Aluminum Alloy (World-renowned) |
| Technology | Five-axis Precision CNC-Machining |
| Battery Capacity | 1200 mAh |
| Motor | Japanese Motor, 8V/8000 U/min |
| Principle | Direct-Drive Long-Axis |
| Hub (Stroke Length) | 3.5mm |
| Adjustable Needle Length | 1mm - 3.5mm |
| Working Voltage | 4-12V |
| Accuracy | 2-3 Stitches |
| Working Duration | 4-6 Hours |
| Charging Time | Approx. 2 Hours |
| Batteries Included | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
Package Dimensions
- Length: 24 cm
- Width: 21 cm
- Height: 12 cm
- Weight: 0.673 kg
5. Setup
- Charge the Wireless Power Supply: Connect the wireless power supply to a compatible USB-C charger using the provided cable. The screen will show a charging symbol. A full charge takes approximately 2 hours.
- Attach the Wireless Power Supply: Screw the wireless power supply onto the top of the tattoo pen machine until securely fastened.
- Insert a Needle Cartridge: Carefully insert a sterile needle cartridge into the front end of the tattoo pen. Twist gently to lock it into place.
- Adjust Needle Depth: Rotate the grip of the tattoo pen to adjust the needle protrusion (depth) to your desired setting (1mm-3.5mm).
- Prepare Ink: Pour your desired tattoo ink into a clean ink cup.
6. Operating Instructions
- Power On/Off: Press and hold the power button for 1.5 seconds to turn the machine ON or OFF.
- Start/Pause Motor: Once powered on, press the power button briefly to start the motor. Press again to pause. The session timer will start when the motor is running and pause when the motor is paused.
- Adjust Voltage: Use the '+' and '-' buttons to adjust the voltage. Each press changes the voltage by 0.1V. Hold the buttons for continuous adjustment. The voltage range is 4.0V to 12.0V, with a standard setting of 8V.
- Strong Start Mode: After powering on, double-press the function button (M) to activate Strong Start Mode. The motor will run at maximum speed for 0.5 seconds, then return to the previously set voltage.
- Battery Level Indicator: The screen displays the current battery level. When the battery is low (e.g., around 79% as indicated, though typically lower for low battery warnings), the battery symbol will flash as a reminder.
- Charging During Operation: The TYPE-C charging port allows the machine to function while charging. The screen will show a charging symbol, then revert to displaying the actual battery level.
- Automatic Needle Retraction/Extension: If the needle is not re-engaged within 5 minutes of pausing, an automatic retraction/extension sequence will occur. When restarting in Strong Start Mode, the previously set needle length will be maintained for 0.5 seconds during the strong start, then return to the set length.
- Function Keys (M): The function key (M) allows switching between two options. Press M to cycle through options. Use the '+' and '-' buttons to adjust settings like needle length or frequency. Rotate the function key to change settings. Press the power button to exit the settings menu. Hold the function key for 5 seconds for automatic settings.
- Stippling Mode (Staple Mode): Press the function key (M) to switch between Stippling Mode and normal mode. In Stippling Mode, use the '+' and '-' buttons to set the frequency. (e.g., 20NPS10HZ refers to specific frequency settings).
7. Maintenance
- Cleaning: After each use, carefully wipe down the machine with a sterile wipe or disinfectant solution. Ensure no liquids enter the motor or electronic components.
- Needle Replacement: Always use new, sterile needle cartridges for each client and dispose of used needles properly in a sharps container.
- Storage: Store the tattoo pen kit in its carrying case in a clean, dry environment away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in use for extended periods.
8. Troubleshooting
- E1 Error Code: This indicates a motor lock or overload protection. Check for any obstructions in the needle mechanism or if the machine is being forced beyond its capacity. Turn off and restart the machine.
- E2 Error Code: This indicates overcurrent protection. This can occur if there is a short circuit or excessive current draw. Disconnect the power supply, check connections, and restart. If the issue persists, contact support.
- Machine Not Turning On: Ensure the battery is charged. If using an RCA cord, ensure it is properly connected to a working power supply.
- Needle Not Moving: Check if the needle cartridge is correctly inserted and locked. Verify the voltage setting is appropriate for operation.
9. User Tips
- Always practice on synthetic skin or other appropriate materials before attempting to tattoo on real skin.
- Maintain a clean and sterile workspace to prevent cross-contamination.
- Familiarize yourself with different needle types and their applications for various tattooing techniques.
- Experiment with voltage settings on practice skin to find the optimal speed for your desired effect and needle type.
- Regularly check the battery level to avoid interruptions during a tattooing session.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
For additional information and guides, you may refer to the official user manual PDF:
