Introduction
This document serves as an instruction manual for the FGHGF Main Brush Motor, a critical replacement component for select robot vacuum cleaner models. This motor is designed to restore the main brush functionality of your robot vacuum, ensuring efficient cleaning performance. Please read this manual carefully before installation and use.
Product Overview
The FGHGF Main Brush Motor is a direct replacement part for the main brush assembly in compatible robot vacuum cleaners. It consists of a motor unit integrated with a gear housing, designed for precise fit and function.

Figure 1: Angled view of the FGHGF Main Brush Motor, showing the motor body, wiring, and gear housing.

Figure 2: Bottom view of the FGHGF Main Brush Motor, highlighting the mounting points and the gear housing.
Setup and Installation
This motor is a replacement part and requires installation into your robot vacuum cleaner. Professional installation is recommended if you are unfamiliar with disassembling electronic devices.
- Power Off: Ensure your robot vacuum cleaner is completely powered off and disconnected from its charging base. Remove the battery if possible.
- Access Main Brush Compartment: Refer to your robot vacuum's original user manual for instructions on how to access the main brush compartment and remove the existing main brush assembly.
- Remove Old Motor: Carefully disconnect any wiring attached to the old main brush motor and unfasten any screws or clips holding it in place. Note the orientation of the old motor for correct installation of the new one.
- Install New Motor: Position the new FGHGF Main Brush Motor in the correct orientation. Secure it with the original screws or clips. Connect the wiring to the appropriate terminals, ensuring a snug fit.
- Reassemble: Reinstall the main brush and close the main brush compartment cover. Ensure all parts are securely fastened.
- Test Functionality: Reinsert the battery (if removed) and power on your robot vacuum. Run a short cleaning cycle to verify that the main brush operates correctly and without unusual noises.
Operating Instructions
The FGHGF Main Brush Motor operates as an integral part of your robot vacuum cleaner's main brush assembly. Once correctly installed, its operation is controlled by the robot vacuum's internal system. There are no separate operating controls for the motor itself. Ensure your robot vacuum is charged and functioning as per its original manufacturer's instructions.
Maintenance
To ensure the longevity and optimal performance of the main brush motor, consider the following maintenance tips:
- Regular Cleaning: Periodically inspect the main brush compartment for hair, debris, or tangled threads that could obstruct the brush or strain the motor. Clean the main brush and its bearings regularly.
- Check for Obstructions: If the main brush stops spinning or makes unusual noises, immediately power off the vacuum and check for any foreign objects lodged in the brush or motor assembly.
- Avoid Water Exposure: Do not expose the motor to water or excessive moisture, as this can cause damage to the electrical components.
Troubleshooting
If you encounter issues after installing the new main brush motor, consider the following:
- Main Brush Not Spinning:
- Check if the motor's wiring is securely connected.
- Ensure there are no obstructions (hair, debris) preventing the main brush from rotating freely.
- Verify that the main brush itself is correctly installed and not damaged.
- Unusual Noises:
- Power off the vacuum and inspect the main brush and motor area for any loose parts or foreign objects.
- Ensure the motor is securely mounted and not vibrating excessively.
- Vacuum Error Codes: If your robot vacuum displays an error code related to the main brush, consult your vacuum's original user manual for specific troubleshooting steps related to that code.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | FGHGF |
| Model Number Compatibility | For Airrobo T10+, Neabot NOMO N1 Plus, Neakasa N2, Roidmi Eve Plus, Roidmi EVE H40 |
| Vacuum Part Type | Motors |
| Material | Rubber, Metal, ABS Plastic |
| Type | Vacuum Cleaner Parts |
| Origin | Mainland China |
| Package Length | 15 cm |
| Package Width | 12 cm |
| Package Height | 8 cm |
| Package Weight | 0.15 kg |
Warranty and Support
This product comes with certain service commitments:
- Free Returns: Enjoy free returns within 90 days of purchase.
- Fast Delivery Guarantee: If delivery is delayed, a $1.00 coupon code may be provided.
- Refund Policy: Refunds are available if the package is lost, items are damaged upon arrival, or if delivery is not completed within 30 days.
For any issues, questions, or support needs, please contact the seller directly through the platform where the purchase was made.
User Tips
- Always ensure the robot vacuum is powered off and unplugged before performing any maintenance or part replacement.
- Keep the main brush and its surrounding area free from hair and debris to prevent motor strain and ensure efficient cleaning.
- If you notice a significant drop in cleaning performance or unusual sounds from the main brush, it might be time to inspect or replace the motor.