DOOYA DT82TN

Contents

DOOYA DT82TN Curtain Motor User Manual

Model: DT82TN

1. Product Overview

The DOOYA DT82TN is a 3-wire AC curtain motor designed for smart home integration. It operates on 100-240V AC input and can transform traditional curtains into intelligent, automated systems. Featuring a built-in ZigBee wireless communication module, it supports remote control, timed settings, continuous speed adjustment, and manual stop functions. It can also be linked with other smart devices to create intelligent living scenarios.

This motor supports Dry Contact Switch and RF433 control, making it versatile for various smart home setups.

2. Safety Information

  • This product is intended for indoor use only. Do not use it in damp environments or outdoors.
  • Be cautious of moisture. Do not splash water or other liquids onto this product.
  • Do not place this product near heat sources.
  • If the power cord is damaged, it must be replaced by a qualified professional from the manufacturer, its service department, or a similar organization to avoid hazards.
  • If the product malfunctions during use, do not attempt to repair it yourself. All repairs should be performed by an authorized professional.
  • Installation involves strong electricity. Please ensure installation is performed by a professional curtain engineer in accordance with regulations, and always turn off the main power switch before installation.
  • It is recommended to keep the original packaging box for at least 30 days from the date of receipt to ensure safe transportation if the product needs to be returned or serviced.

3. Setup and Installation

3.1 Motor Installation into Track

  1. Lightly pull down the motor's retaining clip and hold it.
  2. Rotate the motor into the track transmission box until it reaches the locked position and you hear a "click" sound.
  3. Ensure the motor is securely installed in the track transmission box to prevent detachment or operational issues.

3.2 Wiring

Refer to the wiring diagram for correct power connection. The wiring standard is as follows:

  • Blue wire: Neutral (N)
  • Brown wire: Live (L)
  • Yellow-green wire: Ground (PE)

WARNING: Installation involves strong electricity. Please ensure installation is performed by a professional curtain engineer in accordance with regulations, and always turn off the main power switch before installation.

DOOYA DT82TN Motor with wiring and specifications label
DOOYA DT82TN Motor with wiring and specifications label
DOOYA DT82TN Motor dimensions and port details
DOOYA DT82TN Motor dimensions and port details (Power cable, Dry contact Port, Reset button, LED indicator, 433 signal receiving line)

3.3 Remote Control Pairing

The DT82TN motor supports Dooya 433MHz remote controllers (e.g., DC2700, DC2702D). If you have a new rolling code version motor, it needs to be paired with a rolling code remote control.

  1. Ensure the motor is powered on. The indicator light on the motor will flash once.
  2. Using a small tool (like a screwdriver), press the setting button on the motor for 2 seconds, then release. The indicator light will flash once.
  3. On the remote control, press the 'P' button twice. The motor's indicator light will flash five times, indicating successful pairing.

3.4 Direction Setting

If the curtain movement direction is incorrect after pairing, follow these steps to reverse it:

  1. Press and hold the setting button on the motor until the indicator light flashes twice, then release.
  2. On the remote control, press the 'Close' button. The motor's indicator light will flash five times, confirming the direction has been successfully reversed.
Video demonstrating remote control pairing and direction setting for the DT82TN motor.

4. Operation

4.1 Basic Control with Remote

The remote control allows for easy operation of the curtain motor:

  • Open/Close/Stop: A single click on the corresponding button on the remote control will open, close, or stop the curtain based on its current status.
Dooya remote controller 433mhz
Dooya remote controller 433mhz (single and dual channel options)
Remote control versions DC2700 and DC2702D
Remote control versions DC2700 and DC2702D

4.2 Smart Features

  • Resistance and Stop Function: The curtain motor will automatically stop running if it encounters resistance.
  • Light Touch-Start Function: Slightly pull the curtain in one direction with your hand, and the motor will automatically run until fully opened or closed.
  • Power Off Manual Function: When power is off or on, you can manually open or close the smart curtains like traditional ones.
Resistance and Stop Function
Resistance and Stop Function: The curtain motor will automatically stop running when it comes up with resistance.
Power Off Manual Function
Power Off Manual Function: When power is off or on, you can open/close the smart curtains like traditional ones.
Light Touch-Start Function
Light Touch-Start Function: Slightly pull the curtain in one direction with your hand, the curtain motor will automatically run until fully opened or closed.

5. Maintenance

The DOOYA DT82TN curtain motor is designed for durability and minimal maintenance. Regular cleaning of the curtain track to ensure smooth operation is recommended. Do not use harsh chemicals or abrasive materials on the motor housing.

For any internal issues or repairs, always contact an authorized service professional. Do not attempt to disassemble or repair the motor yourself, as this may void the warranty and pose safety risks.

6. Troubleshooting

6.1 Quick Operation Guide (Reset Button)

Button ActionDescription
Single ClickOpen, close, or stop operation based on current curtain status.
Double ClickQuery motor and gateway connection status.
Triple ClickCustom travel point (sets current position as a travel start/end point).
Press & Hold (5+ seconds)Delete current motor travel settings.
Press & Hold (5+ seconds)Restore factory settings and enter network pairing mode.

6.2 Buzzer and Indicator Light Status

StatusDescription
Buzzer: 2 short beepsExecute delete travel action (when no travel is set).
Buzzer: 3 short beepsExecute custom travel action (when travel is set).
Buzzer: 1 long beepMotor powered on.
Indicator: Blue light flashes slowly twiceDelete motor travel.
Indicator: Yellow light flashes slowlyRestore factory settings.
Indicator: Blue light solidExecute device search.
Indicator: Red light solidMotor direction change successful.
Indicator: Green light solidManual travel point setting successful.
Indicator: Blue light flashes quicklyMotor not connected to network and running.
Indicator: Yellow light solidMotor connected to network and running.

6.3 Common Issues

  • Remote Control Not Working: Ensure the remote control has a working battery. (Note: Remote control batteries are often not included due to shipping restrictions).
  • Curtain Not Moving: Check power connection, ensure motor is securely installed in the track, and verify remote control pairing.
  • Incorrect Direction: Follow the 'Direction Setting' steps in Section 3.4.

7. Specifications

ParameterValue
Product NamePermanent magnet DC motor for open/close curtains
Model NumberDT82TN
Motor Size315 × 50 × 50 mm
Wireless ConnectionZigBee, RF433
Rated Input Voltage100-240V AC, 50/60Hz
Rated Current0.3A
Rated Power13W
Rated Torque1.2 N·m
Rolling Speed14 cm/s (65 r/min)
Max Load40KG
Duty CycleS2 4min
Protection ClassIP40
Insulation ClassClass A
Executive StandardGB/T12350-2022
Battery IncludedNo
High-concerned chemicalNone
EU LVD VoltageHigh voltage: Above 50Vac or 75Vdc

8. User Tips

  • For optimal performance, ensure your curtain track is clean and free of obstructions.
  • When integrating with a smart home gateway, follow the gateway's instructions for adding new ZigBee devices.
  • If using a wall-mounted remote controller, ensure it is compatible with Dooya 433MHz systems.
  • Periodically check the motor's mounting to ensure it remains secure in the track.

9. Warranty and Support

9.1 Warranty Policy

This product's after-sales service adheres to the 'Consumer Rights Protection Law of the People's Republic of China' and 'Product Quality Law of the People's Republic of China', offering a three-guarantee service. To avail of return, exchange, or repair services within the warranty period, a valid invoice is required.

Service TypeService Policy
ReturnFor product quality issues within 7 days of receipt.
ExchangeFor product quality issues within 15 days of receipt.
RepairFor product quality issues within 3 years of receipt.

9.2 Manufacturer Information

  • Manufacturer: Lumi United Technology Co., Ltd.
  • Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
  • Telephone: +86-18589043609

9.3 EU Authorized Representative

  • Name: Sophie Bennett
  • Address: 9 rue du Bat d'Argent, 69001 Lyon, France
  • Telephone: +33-774555006

9.4 Environmental Note

This product complies with EU RoHS directives. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.