Introduction
This manual provides essential information regarding the Midea Refrigerator Motherboard Display Board, suitable for models BCD-555WKM, BCD-553, and BCD-556. This component is a critical part of your refrigerator's control system, managing various functions and displaying operational status. As this is a replacement part, professional installation is highly recommended.
Setup and Installation
Important Safety Notice: Installation of this component should only be performed by a qualified technician. Improper installation can lead to electric shock, damage to the appliance, or fire. Always disconnect the refrigerator from the main power supply before attempting any installation or repair.
- Power Disconnection: Ensure the refrigerator is completely unplugged from the power outlet.
- Access Panel Removal: Carefully locate and remove the access panel(s) that cover the existing motherboard or display board. Refer to your specific refrigerator model's service manual for exact instructions.
- Component Removal: Disconnect all wiring harnesses and mounting screws from the old board. Note the orientation and connection points of each wire, ideally by taking photos.
- New Board Installation: Install the new motherboard/display board in the same position as the old one. Secure it with mounting screws.
- Wiring Connection: Reconnect all wiring harnesses to their corresponding ports on the new board. Double-check all connections for security and correct placement.
- Panel Reinstallation: Replace any removed access panels.
- Power Restoration: Plug the refrigerator back into the power outlet.
Visual Reference:

Image 1: Overview of the Midea Refrigerator Motherboard and Display Board.

Image 2: Close-up view of the motherboard components and connectors.

Image 3: Another perspective of the motherboard, showing Midea branding and various chips.
Operating Instructions
The motherboard and display board are integral components of your Midea refrigerator's control system. They do not have independent operating instructions. Once correctly installed, the board will function as part of the refrigerator's overall system.
For instructions on how to operate your refrigerator, including temperature settings, special modes, and display functions, please refer to the user manual provided with your Midea refrigerator model (BCD-555WKM, BCD-553, or BCD-556).
Maintenance
The motherboard and display board are designed to be maintenance-free under normal operating conditions. However, to ensure longevity and proper function:
- Keep Dry: Ensure the area around the board remains dry and free from moisture.
- Cleanliness: If access panels are removed for other maintenance, gently clean any dust accumulation on the board using a soft, dry brush or compressed air. Do not use liquids.
- Professional Service: Any issues requiring access to or manipulation of the board should be handled by a qualified appliance technician.
Troubleshooting
If your refrigerator experiences issues after replacing the motherboard/display board, consider the following general troubleshooting steps. Always prioritize safety and disconnect power before inspecting components.
- No Power/Display:
- Check if the refrigerator is properly plugged into a working outlet.
- Verify that all wiring harnesses to the new board are securely connected.
- Ensure no fuses or circuit breakers have tripped.
- Incorrect Functionality:
- Confirm that the correct board model was installed for your refrigerator.
- Re-check all wiring connections against your refrigerator's service manual or photos taken during disassembly.
- Error Codes: If the display shows error codes, consult your refrigerator's user manual or service manual for their meaning and recommended actions.
If problems persist, it is strongly recommended to contact a professional appliance repair technician for diagnosis and repair.
Specifications
| Feature | Specification |
|---|---|
| Product Type | Refrigerator Motherboard Display Board |
| Brand | Midea |
| Compatible Models | BCD-555WKM, BCD-553, BCD-556 |
| Origin | Mainland China |
| Fixed Type | Hook (for mounting) |
| Use | Window (This property might be a generic categorization and may not directly apply to the board's function within a refrigerator. It refers to the board's role in controlling display or interface elements.) |
| Package Length | 15 cm |
| Package Width | 15 cm |
| Package Height | 15 cm |
| Package Weight | 1.2 kg |
Warranty and Support
For information regarding warranty, returns, and refunds, please refer to the seller's policies on the platform where this product was purchased. The seller offers a return and refund policy, which can be reviewed for specific terms and conditions.
If you encounter any issues or require technical assistance, please contact the seller directly through the platform's messaging system. For complex installations or repairs, it is always advisable to consult a certified appliance technician.
Seller's Return & Refund Policy: View Policy Details