1. Product Overview
The JIKONG Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, and over-temperature protection, along with coulomb metering, Bluetooth communication, and optional GPS remote capabilities. This BMS is compatible with various battery chemistries, including LiFePO4, ternary lithium, and lithium titanate batteries.
Utilizing energy transfer active balancing technology with independent intellectual property rights, the BMS achieves a maximum continuous balance current of 0.6A. This high-current active equalization technology significantly enhances battery consistency, extends battery range, and delays battery aging.
The system includes a mobile APP (Android and iOS compatible) that connects via Bluetooth. The APP allows users to monitor battery status, modify operating parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive functions make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.
2. Functional Characteristics
The JIKONG Smart BMS offers a comprehensive set of features to ensure optimal battery performance and safety:
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 (Optional)
- Support CAN (Optional)
- Support ACC detection function (Optional)
- Support parallel function (Optional)
- Support alarm function (Optional)
- Support heating function (Optional)
- Support GPS communication
- Charge overcurrent protection
- Charge overvoltage protection
- Charge over temperature protection
- Low temperature protection during charge
- Discharge overcurrent protection
- Discharge undervoltage protection
- Discharge over temperature protection
- Short circuit protection
3. Specifications
3.1. Basic Parameters
| Project | Parameter | Unit |
|---|---|---|
| Supply voltage | 7.5-36 | V |
| Operating power consumption | <1600 | mW |
| Operating temperature | -30-70 | °C |
| Maximum number of collection strings | 8 | String |
| Maximum balancing current | 0.6 | A |
| Maximum charging current | 100 | A |
| Maximum discharge current | 100 | A |
| Maximum instantaneous current | 200 | A |
| Maximum internal loop resistance | 0.75 | mΩ |
| Protective plate size | 133.5*97.4*15.59 | mm |
| Finished weight | 305 | g |
3.2. Default Parameters (JK-BD6A8S-10P)
| Parameter | Li-ion (Default) | LiFePO4 (Default) | LTO (Default) | Unit |
|---|---|---|---|---|
| Balancing initial voltage | 3 | 3 | 2 | V |
| Maximum balancing current | 0.6 | 0.6 | 0.6 | A |
| Unit overcharge voltage | 4.2 | 3.6 | 2.7 | V |
| Single overcharge protection recovery | 4.18 | 3.55 | 2.65 | V |
| Monomer undervoltage protection | 2.82 | 2.6 | 1.8 | V |
| Single undervoltage protection recovery | 2.85 | 2.65 | 1.85 | V |
| Automatic shutdown voltage | 2.8 | 2.5 | 1.7 | V |
| SOC-0% voltage | 2.9 | 2.6 | 1.85 | V |
| SOC-100% voltage | 4.18 | 3.5 | 2.65 | V |
| Trigger balancing differential pressure | 0.01 | 0.01 | 0.01 | V |
| Charging overcurrent protection delay | 30 | 30 | 30 | S |
| Charge overcurrent protection release time | 60 | 60 | 60 | S |
| Discharge overcurrent protection delay | 300 | 300 | 300 | S |
| Discharge overcurrent protection release time | 60 | 60 | 60 | S |
| Short-circuit protection delay | 5 | 5 | 5 | uS |
| Short circuit protection release time | 30 | 30 | 30 | S |
| Charging overtemperature protection temperature | 70 | 70 | 70 | °C |
| Charge overtemperature restore temperature | 60 | 60 | 60 | °C |
| Discharge overtemperature protection temperature | 70 | 70 | 70 | °C |
| Discharge overtemperature recovery temperature | 60 | 60 | 60 | °C |
| Charging low temperature protection temperature | -20 | -20 | -20 | °C |
| Charge low temperature to restore temperature | -10 | -10 | -10 | °C |
| MOS Overtemperature protection temperature | 100 | 100 | 100 | °C |
| MOS Overtemperature protection recovery temperature | 80 | 80 | 80 | °C |
| Device address | 0 | 0 | 0 | / |
4. Package Contents
The standard package for the JIKONG Smart BMS includes the following items:
- 1 x BMS unit
- 1 x NTC temperature sensor (400mm)
- 1 x Set of Balance Wires (750mm)
- 1 x Switch (500mm)
- 1 x Packing box
- 2 x M6 screws
5. Installation Method
The JK-BD6A8S-10P series protection board is suitable for 3-8 series lithium battery packs. The wiring method varies depending on the number of cells in the battery pack. Always refer to the specific wiring diagram for your configuration.
5.1. Wiring Diagram
The following diagram illustrates the general wiring for the JK-BD6A8S-10P BMS. Ensure all connections are secure and correct before powering on the system.
Key connections:
- P-: Connects to the external load or negative terminal of the charger. M6 screws are provided for this connection.
- B-: Connects to the negative battery terminal. M6 screws are provided for this connection.
- Balance Wires: Connect these wires to each cell of your battery pack, ensuring correct polarity and sequence (B1, B2, B3, etc., up to B8, and B+ for the total positive terminal).
- NTC Temperature Sensor: Connect the NTC sensor to the designated interface on the BMS.
- Heater Element (Optional): If using the heating function, connect the heater element's negative electrode to the HT- terminal on the BMS.
- Charger Detection (Optional): For ACC detection, connect the charger's 12V negative output to C_Detect- and 12V positive output to C_Detect+.
6. Interface Definition
The JIKONG Smart BMS features multiple interfaces for various functions and communication. Below is a detailed breakdown of the connectors and their pin definitions.
6.1. Connector P1: Balance with Acquisition Interface (XH-10AW-2.0)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive |
| 3 | B2 | The second battery positive |
| 4 | B3 | The third battery positive |
| 5 | B4 | The fourth battery positive |
| 6 | B5 | The fifth battery positive |
| 7 | B6 | The sixth battery positive |
| 8 | B7 | The seventh battery positive |
| 9 | B8 | The eighth battery positive |
| 10 | B+ | Protection board power supply, connected to the battery |
6.2. Connector P2: Temperature Interface (HY2.0-4P)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | T2A | Second temperature sensor pin A |
| 2 | T2B | Second temperature sensor pin B |
| 3 | T1A | First temperature sensor pin A |
| 4 | T1B | First temperature sensor pin B |
6.3. Connector P3: Optional 4-way External Temperature Interface (HY2.0-4P)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | T5A | Fifth temperature sensor pin A |
| 2 | T5B | Fifth temperature sensor pin B |
| 3 | T4A | Fourth temperature sensor pin A |
| 4 | T4B | Fourth temperature sensor pin B |
6.4. Connector P4: GPS Interface (1.25T-4PWT)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | VGPS | Power output, voltage close to B+ |
| 2 | TX | UART TX, 3.3V |
| 3 | RX | UART RX, 3.3V |
| 4 | GND | Power/signal ground |
6.5. Connector P5: Optional Communication Interface (A1254WF-4A)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | RS485 B | Negative terminal of RS485 signal |
| 2 | RS485 A | Positive terminal of RS485 signal |
| 3 | CAN H | Positive terminal of CAN signal |
| 4 | CAN L | Negative terminal of CAN signal |
6.6. Connector P6: Optional Alarm Interface (A1254WF-2A)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | VCC | Alarm power supply positive |
| 2 | GND | Alarm power negative |
6.7. Connector P7: Optional Parallel Interface (A1254WF-3A)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | GND | Signal ground |
| 2 | P-EN | Parallel module enable signal, output low level to turn on parallel module |
| 3 | P-status | Parallel module status signal |
6.8. Connector P8: Display Interface (A1254WF-6A)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive |
| 3 | B | The display RS485 signal is negative |
| 4 | GND | Negative terminal |
| 5 | K+ | Activate the positive signal |
| 6 | K- | Activate the negative signal |
6.9. Connector P9: Optional ACC Interface (A1254WF-5A)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | C_Detect- | Charger output 12V negative |
| 2 | C_Detect+ | Charger output 12V positive |
| 3 | NC | Empty (Do not connect) |
| 4 | ACC- | ACC Negative |
| 5 | ACC+ | ACC Positive |
6.10. Heating Wire (16AWG - Orange)
| Pin No. | Name | Definition |
|---|---|---|
| 1 | HT- | Heater element negative electrode |
Bluetooth Connection Indicator (D1): When Bluetooth is connected to the protection board, the indicator is steady on. When the connection is disconnected, the indicator blinks.
7. Setup and Activation
7.1. APP Installation
To install the mobile APP for the JIKONG Smart BMS, scan the QR code below. An Android device with Android Version 7 or higher is required.
7.2. Device Activation
Before powering on the protection board, ensure the balance cable is properly connected and that the P- and B- terminals are correctly wired. Verify that the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or even damage to the unit.
The BMS does not have a power-on control switch. It is designed for charging activation: after the battery assembly is complete, connect a charger (with a voltage 2V higher than the battery voltage) to activate the BMS. Alternatively, if you have an optional display screen and button, connect the cable to the display interface and press the button to activate the device.
7.3. Parameter Setting
Detailed instructions for parameter settings are available within the mobile APP. After activation, use the APP to configure parameters such as battery type, number of cells, battery capacity, equalization trigger differential pressure, voltage calibration, and current calibration according to your specific battery setup and operational needs.
8. Operation and Functions
8.1. Active Equalization
The BMS employs active equalization to transfer energy from higher-voltage cells to lower-voltage cells, maintaining battery consistency. Before using this function, set the basic battery parameters (number of cells, capacity, trigger equalization differential pressure, voltage/current calibration) in the APP. The default balance current is 0.6A. Users can adjust this based on battery capacity, ensuring it does not exceed 0.2C of the battery capacity. The equalization automatically activates when the voltage difference between any two battery strings exceeds the set value and turns off when it falls below the set value. If not needed, the equalization switch can be turned off in the APP.
8.2. GPS and Display Interface (Optional)
The BMS provides interfaces for optional GPS modules for battery location tracking and display screens for convenient monitoring of battery information. Users can select these based on their needs.
8.3. Heating Function (Optional)
The optional heating function uses a resistance heater or film to warm the battery in low temperatures, preventing performance degradation. The designed heating current is 20A. Users can control this function via the APP. It is recommended to install a normally closed temperature switch (45°C to 65°C) in the heating circuit as a secondary safety measure to prevent thermal runaway.
8.4. Alarm Function (Optional)
The optional alarm function provides external alerts when the BMS detects safety risks such as overtemperature, overcharge, or over-discharge.
8.5. Battery Parallel Function (Optional)
For energy storage applications, the BMS supports an optional battery parallel function, which requires a parallel module for synchronous operation. The "disable charging current limiting" function in the APP should be turned off when using this feature.
8.6. ACC Detection Function (Optional)
The optional ACC detection function enables discharge. This can be achieved by applying a voltage (20V-100V) between ACC+ and ACC- or by directly short-circuiting them. A separate charger detection interface (C_detect+ and C_detect-) is also provided for enabling charging based on a 12V signal from the charger.
8.7. Protection Functions
- Charge Overvoltage Protection & Recovery: Standard feature. Users can set individual cell overcharge protection and recovery voltages via the APP. The BMS will stop charging if any cell exceeds the set overcharge voltage and resume when all cells fall below the recovery voltage.
- Discharge Undervoltage Protection & Recovery: Standard feature. Users can set undervoltage protection, recovery, and automatic shutdown voltages via the APP. The BMS will stop discharging if any cell falls below the undervoltage protection value and resume when all cells exceed the recovery voltage. If any cell falls below the automatic shutdown voltage, the BMS will shut down.
- Charge Overcurrent Protection & Recovery: Standard feature. Users can set continuous charging current, overcurrent delay, and release time via the APP. Charging will stop if the current exceeds the set value for the specified delay and resume after the release time.
- Discharge Overcurrent Protection & Recovery: Standard feature. Users can set continuous discharge current, overcurrent delay, and release time via the APP. Discharging will stop if the current exceeds the set value for the specified delay and resume after the release time. (Note: Max continuous discharge current can not exceed 100A).
- Overtemperature Protection & Recovery: Standard feature for both charge and discharge. Users can set protection and recovery temperatures via the APP. Charging/discharging will stop if the temperature exceeds the set value and resume when it falls below the recovery value.
- Low Temperature Protection & Recovery: Standard feature for charging. Users can set protection and recovery temperatures via the APP. Charging will stop if the temperature falls below the set value and resume when it rises above the recovery value.
- Short Circuit Protection & Recovery: Standard feature. Users can set short circuit protection delay and recovery time via the APP. The BMS will trigger protection if a short circuit is detected. Adjusting the delay can help prevent false triggers from high instantaneous currents during charger or load connection.
8.8. Emergency Switch
The standard emergency switch function provides a 30-minute window of operation in case of over-temperature, over-discharge, over-charge, or cell drop issues. Activating this switch via the APP's BMS control page will enable both charging and discharging for 30 minutes, allowing for emergency use. Even if a single cell reaches the automatic shutdown voltage during this period, the BMS will continue to operate for the full 30 minutes to prevent critical situations.
8.9. Intelligent Sleep
The standard intelligent sleep function allows users to enable or disable it via the APP. Its purpose is to reduce the BMS's self-consumption by shutting down when in standby (charging/discharging current less than 1A for 26 consecutive hours). The BMS can be reactivated by pressing a button (if equipped) or by connecting a charger.
8.10. Communication Function (Optional)
The BMS supports optional CAN and RS485 communication functions. Users can select these based on their requirements and configure the address and communication protocol via the APP. Refer to the Jikong Protection Board communication protocol document for specific details.
9. Troubleshooting
This section provides guidance on common issues you might encounter with your JIKONG Smart BMS.
- BMS Not Powering On: Ensure all balance cables are correctly connected and the P- and B- terminals are properly wired. The BMS activates upon connecting a charger (voltage 2V higher than battery voltage) or by pressing the activation button if an optional display is installed.
- Charging/Discharging Stops Unexpectedly: Check the APP for active protection triggers (overvoltage, undervoltage, overcurrent, over/low temperature, short circuit). Verify that battery parameters in the APP match your battery type and configuration. Allow time for recovery if a protection event occurred.
- Battery Cells Out of Balance: Ensure the active equalization function is enabled in the APP and that the balance current and trigger differential pressure are set appropriately for your battery capacity.
- Bluetooth Connection Issues: Verify that the BMS is powered on and within range. Check the D1 LED indicator for status (steady on for connected, blinking for disconnected). Ensure your mobile device's Bluetooth is enabled.
- Heating Function Not Working (Optional): Confirm the heating function is enabled in the APP. Check connections to the heater element and ensure any external temperature control switches are functioning correctly and not open-circuited.
- Short Circuit Protection Triggering Frequently: If short circuit protection triggers during charger or load connection, consider increasing the short circuit protection delay in the APP settings. Ensure there are no actual short circuits in your wiring.
- BMS Enters Sleep Mode Too Often: Adjust the intelligent sleep settings in the APP if you require the BMS to remain active for longer periods.
For more detailed troubleshooting or issues not covered here, please refer to the comprehensive user manual PDF or contact JIKONG customer support.
10. User Tips
- Always double-check all wiring connections, especially balance leads and main power connections (P- and B-), before applying power to prevent damage.
- Utilize the mobile APP to customize protection parameters to match your specific battery chemistry (LiFePO4, Li-ion, LTO) and capacity for optimal performance and longevity.
- For cold environments, consider using the optional heating function to maintain battery performance and prevent low-temperature charging issues.
- Regularly monitor battery cell voltages and overall pack health via the APP to identify and address potential issues early.
- Keep the APP updated to the latest version to ensure access to new features and improved stability.
11. Warranty and Support
The JIKONG Smart BMS BD6A8S10P comes with a 3-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use conditions.
For detailed information regarding warranty claims, technical support, or further assistance, please refer to the official user manual PDF available at JIKONG Smart BMS User Manual (PDF) or contact JIKONG customer service.
The manufacturer, Chengdu Jikong Technology Co.LTD, is committed to providing professional technology and service.