JIKONG JK-BD4AxxS-10P

Contents

JIKONG JK BMS BD4AxxS-10P Series User Manual

Model: JK-BD4AxxS-10P | Brand: JIKONG

1. Introduction

1.1. BMS Overview

The JIKONG Lithium battery intelligent protection board (BMS) is a sophisticated management system designed for large capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high current active balancing, overcharge/over-discharge/overcurrent/over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote capabilities. This BMS is compatible with various battery types, including Lithium Iron Phosphate (LiFePO4), Ternary Lithium, and Lithium Titanate (LTO).

The protection board utilizes energy transfer active balancing technology with a continuous balance current of up to 0.4A. This high-current active equalization technology ensures battery consistency, extends battery range, and delays battery aging. A dedicated mobile APP, available for Android and iOS, allows users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. The compact design and comprehensive functionality make it suitable for a wide range of applications, including electric vehicles, energy storage systems, and backup power supplies.

1.2. Functional Characteristics

The JIKONG JK BMS offers a robust set of features to ensure optimal battery performance and safety:

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485 (Optional)
  • Support CAN (Optional)
  • Support parallel function (Optional)
  • Support alarm function (Optional)
  • Support heating function (Optional)
  • Support GPS communication
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Functional Characteristics of JIKONG JK BMS
Figure 1: Overview of JIKONG JK BMS Functional Characteristics.

2. Specifications

2.1. Main Parameters

ParameterValueUnit
Supply Voltage20-100V
Operating Power Consumption<800mW
Operating Temperature-30-70°C
Maximum Number of Collection Strings24String
Maximum Balancing Current0.4A
Maximum Charging Current100A
Maximum Discharge Current100A
Maximum Instantaneous Current200A
Maximum Internal Loop Resistance1mΩ
Protective Plate Size146.8×103×17.6mm
Finished Weight230g
JIKONG JK BMS BD4A20S10P Specifications
Figure 2: Detailed specifications for JK-BD4A20S10P.

2.2. Product Dimensions

The dimensions of the JK-BD4AxxS-10P series protection board are 146.8mm (length) × 103mm (width) × 17.6mm (thickness).

JIKONG JK BMS BD4AxxS-10P Dimensions Diagram
Figure 3: Dimensional drawing of the JK-BD4AxxS-10P BMS.

3. Setup

3.1. Packing List

Before installation, please verify that all components are present in the package:

  • BMS unit ×1
  • NTC (Temperature Sensor) ×1 (400mm)
  • Balance Wires ×1 (750mm)
  • Switch ×1 (500mm)
  • Packing box ×1
  • M6 screws ×2
JIKONG JK BMS Packing List
Figure 4: Contents of the JIKONG JK BMS package.

3.2. Installation Method

The JK-BD4AxxS-10P series protection board is suitable for 7-24 series lithium battery packs. The wiring method varies depending on the number of cells in the battery pack. Always ensure correct connections to prevent damage to the BMS or battery.

JIKONG JK BMS BD4AxxS-10P-24S Wiring Diagram
Figure 5: Wiring diagram for JK-BD4AxxS-10P-24S. This diagram illustrates connections for Load, Charger, Temperature Probe, Heater Element, and Parallel Interface. Ensure B- (total negative battery) and P- (charger/load negative) are correctly connected, and balance wires are connected to B+ and individual cell positives (B1, B2, ... Bn).

3.3. Device Activation

Before powering on the protection board, double-check that the balance cable is properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.

The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage must be 2V higher than the battery voltage. After the battery assembly is complete, connect the charger to activate the protection board.

Alternatively, for models with an optional display screen and button, activation can be achieved by inserting the cable into the display interface and pressing the button.

4. Operation

4.1. APP Installation and Usage

The mobile APP for the JIKONG JK BMS supports Android (minimum version 7) and iOS operating systems. Scan the QR code below to download the APP:

QR Code for JIKONG BMS APP Download
Figure 6: QR code for downloading the JIKONG BMS mobile APP.

The APP allows for multi-screen display and data connection, providing comprehensive monitoring and control:

Multi-screen display and data connection options
Figure 7: The JIKONG BMS APP supports iOS/Android/HarmonyOS and offers multi-language support. It allows monitoring via mobile app, PC software, and JIKONG 4.3LCD display.

4.2. Active Equalization

The BMS uses active equalization to transfer energy from high-voltage cells to low-voltage cells, ensuring voltage balance with minimal energy loss. Before using this function, set basic battery parameters in the APP, including cell count, battery capacity, and trigger equalization differential pressure (default 0.01V). The default balance current is 0.4A, adjustable based on battery capacity (recommended not to exceed 0.2C). If not needed, the balancing switch can be turned off in the APP.

Active Balancing (Lossless Balancing) Diagram
Figure 8: Active balancing principle, showing energy transfer between battery cells.

4.3. GPS and Display Interface

The protection board includes reserved GPS and display interfaces. Users can select a GPS device for battery location tracking and choose a compatible display screen to view battery information according to their needs.

4.4. Heating Function (Optional)

The optional heating function uses a resistance heater or heating film to warm the battery at low temperatures, preventing reduced charging/discharging efficiency due to cold. The designed heating current is 10A. Users can control this function via the APP. It is recommended to install a normally closed temperature switch (45°C to 65°C) in series with the heating circuit as a secondary protection to prevent overheating.

4.5. Alarm Function (Optional)

The optional alarm function provides external alerts when the BMS detects safety risks such as overtemperature, overcharge, or overdischarge.

4.6. Battery Parallel Function (Optional)

This optional function supports parallel connection of battery packs for energy storage applications. It requires synchronous use with parallel modules and disabling the “disable charging current limiting” function in the APP.

4.7. Protection Functions

The BMS includes various protection mechanisms, configurable via the APP:

  • Charge Overvoltage Protection: Prevents overcharging by shutting off charging when any cell voltage exceeds the set limit. Resumes when all cells are below the recovery voltage.
  • Discharge Undervoltage Protection: Prevents over-discharging by shutting off discharge when any cell voltage drops below the set limit. Resumes when all cells are above the recovery voltage.
  • Charge Overcurrent Protection: Triggers if charging current exceeds the set continuous limit for a specified delay, shutting off charging. Resumes after a set release time.
  • Discharge Overcurrent Protection: Triggers if discharge current exceeds the set continuous limit for a specified delay, shutting off discharge. Resumes after a set release time. (Maximum continuous discharge current should not exceed 100A).
  • Overtemperature Protection: Shuts off charging/discharging if battery temperature exceeds set limits. Resumes when temperatures return to safe levels.
  • Low Temperature Protection: Shuts off charging if battery temperature drops below set limits. Resumes when temperatures return to safe levels. Recommended for cold climates, consider using the heating function.
  • Short Circuit Protection: Automatically protects against short circuits. Users can adjust the short circuit protection delay (µs) and recovery time (S) via the APP.

4.8. Emergency Switch

The emergency switch function provides a 30-minute window of operation during critical situations (e.g., overtemperature, over-discharge, over-charge, cell drop). Activating it via the APP allows the BMS to continue charging/discharging for 30 minutes, even if a single cell reaches the automatic shutdown voltage, to prevent immediate power loss in critical scenarios.

4.9. Intelligent Sleep

The intelligent sleep function (configurable via APP) puts the BMS into a low-power standby mode if the charge/discharge current is less than 1A for 26 consecutive hours. This reduces energy consumption. The BMS can be reactivated by pressing a button or connecting a charger.

4.10. Communication Function

The BMS supports optional CAN and RS485 communication. Users can select the desired communication mode and configure the address and protocol via the APP. Refer to the JIKONG Protection Board Communication Protocol document for specific details.

JIKONG JK BMS Rich Interface Diagram
Figure 9: The BMS offers a rich interface including CAN, RS485, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer, GPS, Temperature, and Display interfaces.

5. Maintenance

To ensure the longevity and reliable operation of your JIKONG JK BMS, regular maintenance is recommended:

  • Visual Inspection: Periodically inspect the BMS and all connected wiring for any signs of damage, corrosion, or loose connections.
  • Cleaning: Keep the BMS clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
  • Firmware Updates: Check the JIKONG APP regularly for any available firmware updates to ensure optimal performance and access to new features.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature range (-30°C to 70°C) and avoid exposure to excessive moisture or harsh chemicals.

6. Troubleshooting

The JIKONG JK BMS is designed with multiple protection features. If an issue occurs, the BMS will trigger a protection state. Use the APP to diagnose the specific protection activated.

  • Overvoltage/Undervoltage Protection: If triggered, check individual cell voltages via the APP. Ensure the charger/load is functioning correctly and not over/under-charging the battery.
  • Overcurrent Protection (Charge/Discharge): If triggered, reduce the charging or discharging current. Verify that the load or charger is not drawing/supplying excessive current. Check for any short circuits in the wiring.
  • Overtemperature/Low Temperature Protection: If triggered, allow the battery to cool down or warm up to within the operating temperature range. Ensure adequate ventilation for cooling or consider using the optional heating function in cold environments.
  • Short Circuit Protection: If triggered, immediately disconnect the load/charger and inspect all wiring for actual short circuits. After resolving any physical shorts, the BMS should recover after the set recovery time. If it triggers immediately upon connection, adjust the short circuit delay in the APP.
  • BMS Not Activating: Ensure all balance wires and main power connections (P- and B-) are correct and secure. If using charging activation, verify the charger voltage is at least 2V higher than the battery voltage.

For detailed parameter settings and advanced troubleshooting, refer to the comprehensive PDF user manual.

7. User Tips

  • Cable Verification: Always ensure all necessary cables, including balance wires, NTC temperature sensors, and switch wires, are included in your package and correctly connected according to the wiring diagram before initial power-up.
  • APP Parameter Tuning: Take advantage of the mobile APP to fine-tune parameters like equalization differential pressure and protection thresholds to match your specific battery type and usage scenario for optimal performance and longevity.

8. Warranty and Support

8.1. Service Commitment

The product comes with a warranty covering quality issues not caused by human factors (e.g., functional failures, component defects) for three years from the date of receipt. Service includes free repair or replacement, depending on the product's repairability evaluation results.

8.2. After-Sales Process

  1. Customer Application: Submit applications through official after-sales channels (email/online customer service), providing order numbers, fault descriptions, and evidence (photos/videos).
  2. Return of Goods: The customer is responsible for the international logistics cost of sending the product back to China for repair/replacement. A waybill number for tracking purposes is required.
  3. Packaging Requirements: Ensure product accessories are complete and packaging is intact to prevent transit damage.
  4. Detection and Processing: After receiving the product, the quality department will complete inspection and inform of repair/replacement plan within 5-7 working days. Responsibility for non-human damage is free repair/replacement, with the seller bearing return logistics costs.
  5. Return and Tracking: After passing quality inspection, the repaired/replaced product will be sent back with full logistics tracking information. The return logistics cycle is typically 7-15 working days (may vary due to customs clearance). Customers must cooperate in providing necessary customs declaration documents to avoid delays.

8.3. Additional Resources

A detailed user manual in PDF format is available for further reference. You can view or download it from the following link: JIKONG JK BMS User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.