JIKONG JK-B1A8S-10P

Contents

JIKONG Smart BMS (JK-B1A8S-10P) User Manual

Model: JK-B1A8S-10P | Brand: JIKONG

1. Introduction

1.1. Product Overview

The JIKONG Lithium battery intelligent protection board is a management system tailored for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge, over-temperature protection, coulomb meter, Bluetooth communication, and GPS remote functions. It is compatible with lithium iron phosphate, ternary lithium, and lithium titanate battery types.

This protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous 1A balance current. This high-current active equalization technology ensures battery consistency, improves battery range, and delays battery aging.

A mobile APP supporting Android and iOS is available. The APP connects via Bluetooth to monitor battery status, modify parameters, and control charge/discharge switches. The compact design, simple operation, and comprehensive functions make it suitable for various applications including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power, and solar power stations.

JIKONG JK-B1A8S-10P Smart BMS highlighting 3 years warranty, Li-ion/LiFePO4/LTO support, 1A active balance, built-in Bluetooth, and 4S-8S 100A capabilities.
This image provides an overview of the JIKONG JK-B1A8S-10P Smart BMS, emphasizing its key features and compatibility.

1.2. Functional Characteristics

The JIKONG Smart BMS offers a wide range of functional characteristics to ensure optimal battery performance and safety:

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485 (Optional)
  • Support CAN (Optional)
  • Support heating function (Optional)
  • Support parallel function (Optional)
  • Support alarm function (Optional)
  • Support GPS communication (Optional)
  • Discharge precharge function (Optional)
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Checklist of functional characteristics for the JIKONG Smart BMS, including various protections and communication options.
This image lists the comprehensive functional characteristics of the BMS, such as LED indicators, APP control, precise measurements, and multiple protection features.

2. Specifications

2.1. Basic Parameters

ParameterValueUnit
Supply Voltage10-36V
Operating Power Consumption<900mW
Operating Temperature-30-70°C
Maximum Number of Collection Strings8String
Maximum Balancing Current1A
Maximum Charging Current100A
Maximum Discharge Current100A
Maximum Instantaneous Current200A
Maximum Internal Loop Resistance0.8mΩ
Protective Plate Size153.9*107*17.6mm
Finished Weight411g

2.2. Default Parameters

ParameterLi-ion (Default)LiFePO4 (Default)LTO (Default)Unit
Balancing Initial Voltage332V
Maximum Balancing Current111A
Unit Overcharge Voltage4.23.62.7V
Single Overcharge Protection Recovery4.183.552.65V
Monomer Undervoltage Protection2.822.61.8V
Single Undervoltage Protection Recovery2.852.651.85V
Automatic Shutdown Voltage2.82.51.7V
SOC-0% Voltage2.92.61.85V
SOC-100% Voltage4.183.52.65V
Trigger Balancing Differential Pressure0.010.010.01V
Charging Overcurrent Protection Delay303030S
Charge Overcurrent Protection Release Time606060S
Discharge Overcurrent Protection Delay300300300S
Discharge Overcurrent Protection Release Time606060S
Short-Circuit Protection Delay150015001500uS
Short Circuit Protection Release Time606060S
Charging Overtemperature Protection Temperature707070°C
Charge Overtemperature Restore Temperature606060°C
Discharge Overtemperature Protection Temperature707070°C
Discharge Overtemperature Recovery Temperature606060°C
Charging Low Temperature Protection Temperature-20-20-20°C
Charge Low Temperature to Restore Temperature-10-10-10°C
MOS Overtemperature Protection Temperature100100100°C
MOS Overtemperature Protection Recovery Temperature808080°C
Device Address000/
Discharge Precharge Time000S

2.3. Product Dimensions

The JK-B1A8S-10P series protection board has overall dimensions of 153.9mm x 107mm x 17.6mm.

Technical drawing showing the dimensions of the JIKONG BMS board.
This image provides a detailed diagram of the BMS board with measurements in millimeters, indicating its length, width, and thickness.

3. Package Contents

The standard package for the JIKONG Smart BMS includes the following items:

  • BMS unit: 1
  • NTC temperature sensor (400mm): 1
  • Balance Wires (750mm): 1
  • Switch (500mm): 1
  • Packing box: 1
  • M6 screws: 2
Contents of the JIKONG BMS package, including the BMS board, wires, and accessories.
This image visually represents all items included in the product package, such as the BMS unit, NTC temperature sensor, balance wires, switch, and mounting screws.

4. Installation

4.1. Product Appearance and Interfaces

Front view of the JIKONG BMS board.
A clear front view of the BMS board, showing its main components and QR code for APP download.
Angled view of the JIKONG BMS board, showing connectors.
An angled perspective of the BMS board, highlighting the various connection ports at the bottom.
Back view of the JIKONG BMS board.
The rear view of the BMS board, showing the mounting points and overall construction.
Side view of the JIKONG BMS board, detailing connector layout.
A side profile of the BMS board, illustrating the arrangement of its connectors.

Interface Definitions

ConnectorPinNameDefinition
P1 (XH-10AW-2.54 Balance with Acquisition interface)1B-Total negative battery
2B1The first battery positive
3B2The second battery positive
4B3The third battery positive
5B4The fourth battery positive
6B5The fifth battery positive
7B6The sixth battery positive
8B7The seventh battery positive
9B8The eighth battery positive
10B+Protection board power supply, connected to the battery
P2 (A1254WF-6A Display interface)1VCCDisplay power output
2AThe display RS485 signal is positive
3BThe display RS485 signal is negative
4GNDNegative terminal
5K+Activate the positive signal
6K-Activation signal negative electrode
P3 (HY2.0-4P Temperature interface)1TIAFirst temperature sensor pin A
2T1BFirst temperature sensor pin B
3T2ASecond temperature sensor pin A
4T2BSecond temperature sensor pin B
P4 (HY2.0-4P 4 external optional Temperature interface)1T3AThird temperature sensor pin A
2T3BThird temperature sensor pin B
3T4AFourth temperature sensor pin A
4T4BFourth temperature sensor pin B
P5 (A1254WF-2A Optional Buzzer interface)1VCCBuzzer power supply positive
2GNDBuzzer power supply negative
P6 (1.25T-4PWT GPS interface)1VGPSPower output, the voltage is close to B+
2TXUART TX, 3.3V
3RXUART RX, 3.3V
4GNDPower/signal ground
P7 (A1254WF-4A Optional Communication interface)1RS485 BNegative terminal of RS485 signal
2RS485 ARS485 signal positive terminal
3CAN HCAN signal positive terminal
4CAN LCAN signal negative terminal
P8 (A1254WF-3A Optional Parallel interface)1GNDSignal ground
2P-ENParallel module enable signal, output low level Turn on parallel module
3P-statusParallel module status signal
Heating wire (16AWG-Orange-15CM Optional)1HT-Heater element negative electrode
D1Bluetooth connection indicator: When Bluetooth is connected to the protection board, the indicator is steady on, and when the connection is disconnected, the indicator is blinking.
P-Connect to external load or negative terminal of charger, equipped with M6 screws.
B-Connect to the negative battery terminal, equipped with M6 screws.

4.2. Wiring Diagram

The JK-B1A8S-10P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack, as shown in the diagram below. Ensure all connections are correct before powering on.

Detailed wiring diagram for the JIKONG JK-B1A8S-10P BMS, showing connections for battery cells, load, charger, temperature probes, and heating wire.
This essential diagram illustrates how to correctly connect the BMS to a battery pack, including balance wires, main power terminals (P- and B-), temperature sensors, and optional heating elements. Pay close attention to the polarity and sequence of connections.

5. Operation

5.1. Device Activation

Before powering on the protection board, verify that the balance cable is properly connected and that P- and B- are correctly wired. Ensure the protection board is securely fixed to the battery cells. Incorrect connections can lead to abnormal operation or damage. The protection board does not have a power-on switch; it is designed for charging activation. After battery assembly, connect the charger (with voltage 2V higher than battery voltage) to activate the board. The board also supports activation via a button or display screen for users with these optional features.

5.2. APP Installation and Usage

The mobile APP for the JIKONG BMS can be obtained by scanning the QR code in the official user manual PDF. An Android device with version 7 or higher is required.

The APP allows you to monitor battery status, modify working parameters, and control charge/discharge switches via Bluetooth.

Screenshots of the JIKONG Smart BMS mobile application and PC software, showing various data displays and control options.
This image displays the user interface of the JIKONG BMS mobile app and PC software, demonstrating how battery data is presented and how settings can be adjusted across different platforms.

5.3. Functional Descriptions

Active Equalization

The BMS uses active equalization to transfer energy from higher-voltage cells to lower-voltage cells, ensuring battery consistency. Users can set the balance trigger voltage difference (mV) in the APP. The default balance current is 1A, adjustable based on battery capacity (recommended not to exceed 0.2C). The balancing function automatically activates when the voltage difference exceeds the set value and deactivates when it falls below.

GPS and Display Interface

The protection board includes reserved GPS and display interfaces. Users can connect optional GPS devices for battery location tracking and external display screens to view battery information.

Diagram illustrating the rich interface options of the JIKONG BMS, including CAN, RS485, Bluetooth, NTC, and various switches.
This image highlights the diverse communication and sensor interfaces available on the BMS, such as temperature, GPS, and display connections, enabling comprehensive system integration.

Heating Function (Optional)

For low-temperature environments, an optional heating function can be used with resistance heaters or heating films to prevent reduced battery activity. The designed heating current is 4A. Users can control this function via the APP. A temperature control switch (45°C-65°C normally closed) is recommended as a secondary protection.

Alarm Function (Optional)

The optional alarm function provides external alerts when the BMS detects safety risks such as over-temperature, overcharge, or over-discharge.

Battery Pack Parallel Function (Optional)

The optional parallel function allows multiple battery packs to be used together, suitable for energy storage applications. This function requires synchronous use with parallel modules and disabling 'charging current limiting' in the APP.

Overvoltage Protection (Charge)

The BMS includes standard charge overvoltage protection. Users can set individual cell overcharge protection and recovery voltages in the APP. If any cell exceeds the set overvoltage, charging will stop until all cell voltages fall below the recovery voltage.

Undervoltage Protection (Discharge)

Standard discharge undervoltage protection is included. Users can set undervoltage protection, recovery, and automatic shutdown voltages in the APP. If any cell falls below the set undervoltage, discharge will stop. Discharge resumes when all cells are above the recovery voltage. If any cell reaches the automatic shutdown voltage, the board will shut down.

Overcurrent Protection (Charge & Discharge)

Standard charge and discharge overcurrent protection is provided. Users can set continuous current, overcurrent delay, and recovery times in the APP. If the current exceeds the set value for the specified delay, protection activates, stopping charge/discharge. Operation resumes after the recovery time. (Note: Maximum continuous discharge current should not exceed 100A).

Overtemperature Protection (Charge & Discharge)

Standard charge and discharge overtemperature protection is included. Users can set protection and recovery temperatures in the APP. If the temperature exceeds the set value, charge/discharge stops until the temperature falls below the recovery value.

Low Temperature Protection (Charge)

Standard charge low temperature protection is included. Users can set protection and recovery temperatures in the APP. If the temperature falls below the set value, charging stops until the temperature rises above the recovery value. For extremely cold areas, the heating function is recommended.

Short Circuit Protection

Standard short circuit protection is included. Users can set short circuit delay (us) and recovery time (S) in the APP. If a short circuit occurs during charging (e.g., due to high peak current from the charger), increasing the delay time can resolve it. Similarly, for discharge short circuits (e.g., due to large capacitance loads), increasing the delay time can prevent false triggers.

Discharge Precharge Function (Optional)

An optional discharge precharge function is available, with a default precharge time of 5 seconds. Users can enable or disable this function as needed.

Emergency Switch

The standard emergency switch function allows the BMS to force charge and discharge for 30 minutes if issues like over-temperature, over-discharge, or cell imbalance occur. This provides an emergency operating window, even if a cell reaches its automatic shutdown voltage, to prevent critical failures.

Intelligent Sleep

The intelligent sleep function (standard) allows the BMS to enter a low-power state when the charge/discharge current is less than 1A for 26 consecutive hours. This reduces self-consumption. The BMS can be reactivated by pressing a button or connecting a charger.

Communication Function

The BMS supports optional CAN/RS485 communication. Users can configure the address and communication protocol via the APP according to their requirements. Refer to the JIKONG Protection Board communication protocol document for details.

6. User Tips

  • Cables Included: The product package typically includes essential cables such as balance wires and an NTC temperature sensor, as confirmed by user inquiries.
  • Temperature Monitoring: The BMS actively monitors temperature via the included NTC sensor, providing crucial protection against over-temperature and low-temperature conditions during charging and discharging.
  • APP for Configuration: Utilize the JIKONG mobile APP (available for Android 7+ and iOS) to customize parameters like balance trigger voltage, protection thresholds, and to monitor real-time battery data.
  • Wiring Accuracy: Always double-check the wiring, especially balance cables and main power connections (P- and B-), before activating the BMS to prevent damage.

7. Troubleshooting

General Troubleshooting Steps

  • No Power/Activation Issue: Ensure the charger is connected and its voltage is at least 2V higher than the battery pack voltage for initial activation. Verify all wiring, especially P- and B- connections.
  • Balancing Not Active: Check the active equalization settings in the APP. Ensure the balance trigger differential pressure is set appropriately and that the function is enabled.
  • Protection Triggered Frequently: Review the overcurrent, overvoltage, undervoltage, and overtemperature settings in the APP. Adjust delay and recovery times if necessary, especially for short circuit protection with high-capacitance loads.
  • Communication Issues: Ensure Bluetooth is enabled on your mobile device and the BMS. For RS485/CAN, verify wiring and communication protocol settings in the APP.
  • Heating Function Not Working: If using the optional heating function, ensure it's enabled in the APP and that any external temperature control switches are functioning correctly.

8. Maintenance

  • Regular Inspection: Periodically inspect all wiring connections for looseness or damage.
  • Software Updates: Keep the JIKONG APP updated to the latest version for optimal performance and new features.
  • Cleanliness: Keep the BMS board clean and free from dust and moisture to ensure proper heat dissipation and operation.
  • Environmental Conditions: Operate the BMS within the specified temperature range (-30°C to 70°C) to prevent damage and ensure longevity.

9. Warranty and Support

9.1. Service Commitment

The product comes with a 3-year warranty from the date of receipt. The warranty covers quality issues not caused by human factors (e.g., functional failures, component defects). Service includes free repair or replacement based on product repairability evaluation.

9.2. After-Sales Process

(1) Customer Application

Submit applications through official after-sales channels (email/online customer service), providing order numbers, fault descriptions, and evidence (photos/videos).

(2) Return of Goods

The customer is responsible for international logistics costs for sending the product back to China and providing a tracking number.

(3) Packaging Requirements

Ensure product accessories are complete and packaging is intact to prevent damage during transit.

(4) Detection and Processing

After receiving, the quality department will complete inspection and repair/replacement within 5-7 working days. Responsibility definition: Non-human damage qualifies for free repair/replacement, with the seller bearing return logistics costs.

(5) Return and Tracking

After passing inspection, the repair/replacement product will be sent back with full logistics tracking information. Time commitment: Return logistics cycle is typically 7-15 working days (may vary due to customs clearance). Cross-border compliance: Customers need to cooperate in providing necessary customs declaration documents.

10. Frequently Asked Questions (FAQ)

Q: Does the BMS come with cables?

A: Yes, the package includes balance wires, an NTC temperature sensor, and a switch, along with the BMS unit and M6 screws.

Q: Does the BMS monitor temperature?

A: Yes, the JIKONG Smart BMS includes an NTC temperature sensor and features charge over temperature protection, discharge over temperature protection, and charge low temperature protection.

Q: What battery types are supported?

A: The BMS supports Li-ion, LiFePO4, and LTO battery types.

Q: How do I activate the BMS?

A: The BMS is activated by connecting a charger with a voltage at least 2V higher than the battery pack voltage. Optional models may also support button or display activation.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.