JIKONG BD4A8S6P BD4A8S4P

Contents

JIKONG Active Balance Protection Board User Manual

Models: JK-BD4A8S-4P, JK-BD4A8S-6P

Version: 15.3.2

1. Product Overview

The JIKONG Lithium Battery Intelligent Protection Board is a sophisticated management system designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge/over-discharge protection, overcurrent/over-temperature protection, coulomb metering, Bluetooth communication, and GPS remote capabilities.

This BMS is compatible with various battery types, including lithium iron phosphate (LiFePO4), ternary lithium, and lithium titanate (LTO) batteries.

The protection board utilizes energy transfer active balancing technology with a continuous balance current of up to 0.4A. This high-current active equalization technology ensures optimal battery consistency, extends battery range, and mitigates battery aging.

A dedicated mobile application (APP) is available for Android and iOS operating systems. The APP connects to the protection board via Bluetooth, allowing users to monitor battery status, modify working parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive functionality make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

2. Functional Characteristics

The JIKONG BMS offers a robust set of features to ensure efficient and safe battery management:

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485 (Optional)
  • Support CAN (Optional)
  • Support parallel function (Optional)
  • Support alarm function (Optional)
  • Support heating function (Optional)
  • Support GPS communication (Optional)
  • Discharge precharge function (Optional)
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Functional characteristics of JIKONG BMS
Diagram illustrating the functional characteristics of the JIKONG Smart Active Balance BMS.

3. Specifications

The JIKONG BMS is available in 40A and 60A versions, with specific parameters detailed below:

3.1. 40A Protection Board Basic Parameters

ParameterValueUnit
Supply voltage10-36V
Operating power consumption<900mW
Operating temperature-30-70°C
Maximum number of collection strings8String
Maximum balancing current0.4A
Maximum charging current40A
Maximum discharge current40A
Maximum instantaneous current80A
Maximum internal loop resistance1.5mΩ
Protective plate size121.5*93*17.6mm
Finished weight180g

3.2. 60A Protection Board Basic Parameters

ParameterValueUnit
Supply voltage10-36V
Operating power consumption<900mW
Operating temperature-30-70°C
Maximum number of collection strings8String
Maximum balancing current0.4A
Maximum charging current60A
Maximum discharge current60A
Maximum instantaneous current120A
Maximum internal loop resistance1.1mΩ
Protective plate size121.5*93*17.6mm
Finished weight180g
JIKONG BMS Product Specification Table
Detailed product specification table for JK-BD4A8S4P and JK-BD4A8S6P models.

3.3. Product Dimensions

JIKONG BMS dimensions diagram
Dimensions of the JIKONG BD4A8S-4P/6P protection board (121.5mm x 93mm x 17.6mm).

4. Setup and Installation

4.1. Product Appearance and Interfaces

JIKONG BMS with labeled connectors
Front view of the JIKONG BMS with main connectors labeled P-, B-, and D1, along with balance wire and other interfaces.
JIKONG BMS rich interface diagram
Diagram showing various communication and control interfaces available on the JIKONG BMS, including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer.

4.2. Connector and LED Definitions

The BMS features several connectors for various functions. Refer to the table below for detailed pin definitions:

ConnectorInterface NamePin No.Pin NameDefinition
P1 (HY2.0-10P)Balance with Acquisition interface1B-Total negative battery
2B1The first battery positive
3B2The second battery positive
4B3The third battery positive
5B4The fourth battery positive
6B5The fifth battery positive
7B6The sixth battery positive
8B7The seventh battery positive
9B8The eighth battery positive
10B+Protection board power supply, connected to the battery
P2 (HY2.0-4P)Temperature interface (4 external optional)1T1AFirst temperature sensor pin A
2T1BFirst temperature sensor pin B
3T2ASecond temperature sensor pin A
4T2BSecond temperature sensor pin B
P3 (HY2.0-4P)Temperature interface1T3AThird temperature sensor pin A
2T3BThird temperature sensor pin B
3T4AFourth temperature sensor pin A
4T4BFourth temperature sensor pin B
P4 (1.25T-4PWT)GPS interface1VGPSPower output, voltage close to B+
2TXUART_TX, 3.3V
3RXUART_RX, 3.3V
4GNDPower/signal ground
P5 (A1254WF-2A)Buzzer interface (Optional)1VCCBuzzer power supply positive
2GNDBuzzer power negative
P6 (A1254WF-4A)Communication interface (Optional)1RS485 BNegative terminal of RS485 signal
2RS485 APositive terminal of RS485 signal
3CAN HPositive terminal of CAN signal
4CAN LNegative terminal of CAN signal
P7 (A1254WF-6A)Display interface1VCCDisplay power output
2APositive terminal of display RS485 signal
3BNegative terminal of display RS485 signal
4GNDNegative terminal
5K+Activate the positive signal
6K-Activation signal negative electrode
P8 (A1254WF-3A)Parallel interface (Optional)1GNDSignal ground
2P-ENParallel module enable signal, output low level to turn on parallel module
3P-statusParallel module status signal
P9 (A1254WF-7A)Heating interface (Optional)1HT-Heater element negative electrode
2HT-
3HT-
4HT-
5HT-
Charge indication6CD+Charge indication input positive terminal
7CD-Charge indication input negative terminal
D1Bluetooth connection indicatorSteady on when connected, blinking when disconnected.
P-Main discharge negative terminalConnect to external load or negative terminal of charger, equipped with M6 screws.
B-Battery negative terminalConnect to the negative battery terminal, equipped with M6 screws.

4.3. Wiring Diagram

The JK-BD4A8S-4P/6P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in the battery pack. Always ensure correct connections before powering on the BMS.

JIKONG BMS wiring diagram
Exploded view of the JIKONG BMS showing internal components and heat dissipation design.
JIKONG BMS wiring diagram
Detailed wiring diagram for the JIKONG BD4A8S-4P/6P BMS, showing connections for load, charger, temperature probes, balance wires, and heating elements.

Important: Before starting the protection board, verify that the balance cables are properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.

5. Operating Instructions

5.1. Device Activation

The protection board does not have a physical power-on switch. It is designed for charging activation mode. To activate the BMS, connect a charger with a voltage 2V higher than the battery voltage after the battery assembly is complete.

Alternatively, if you have an optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.5.2. Active Equalization

The BMS employs active equalization to transfer energy from higher-voltage cells to lower-voltage cells. To use this function, set the basic battery parameters (number of cells, battery capacity, trigger equalization differential pressure, voltage calibration, current calibration) in the JIKONG BMS APP. The default balance current is 0.4A. Users can adjust this current based on battery capacity, ensuring it does not exceed 0.2C of the battery capacity. If not needed, the balancing switch can be turned off in the APP.

Active balancing illustration for JIKONG BMS
Illustration of the active balancing process, showing energy transfer between battery cells.

5.3. Protection Functions

The BMS includes various protection mechanisms:

  • Charge Overvoltage Protection: Standard feature. Users can set overcharge protection and recovery voltages via the APP. The BMS will stop charging if any cell exceeds the set overvoltage and resume when all cells are below the recovery voltage.
  • Discharge Undervoltage Protection: Standard feature. Users can set undervoltage protection, recovery, and automatic shutdown voltages via the APP. The BMS will stop discharging if any cell falls below the set undervoltage and resume when all cells are above the recovery voltage. If a cell drops below the automatic shutdown voltage, the BMS will shut down.
  • Charge Overcurrent Protection: Standard feature. Users can set continuous charging current, overcurrent delay, and recovery time via the APP. Charging will stop if the current exceeds the set limit for the specified delay and resume after the recovery time.
  • Discharge Overcurrent Protection: Standard feature. Users can set continuous discharge current, overcurrent delay, and recovery time via the APP. Discharging will stop if the current exceeds the set limit for the specified delay and resume after the recovery time. (Note: Maximum continuous discharge current cannot exceed 40A/60A).
  • Overtemperature Protection: Standard feature for both charging and discharging. Users can set overtemperature protection and recovery thresholds via the APP. The BMS will stop the respective operation if the temperature exceeds the limit and resume when it falls below the recovery threshold.
  • Low Temperature Protection: Standard feature for charging. Users can set low temperature protection and recovery thresholds via the APP. Charging will stop if the temperature falls below the limit and resume when it rises above the recovery threshold. For extremely cold areas, using the optional heating function is recommended.
  • Short Circuit Protection: Standard feature. The BMS automatically detects short circuits. Users can adjust the short circuit protection delay (in microseconds) and recovery time (in seconds) via the APP if needed. If a short circuit occurs during initial charging or load connection, increasing the delay may resolve it.

5.4. Optional Functions

  • GPS and Display Interface: The BMS reserves a GPS port for optional GPS devices, enabling battery location tracking. A display interface is also available for connecting JIKONG display screens to view battery information.
  • Heating Function: Optional. For low-temperature environments, a resistance heater or heating film can be used to warm the battery, preventing performance degradation. The designed heating current is 4A. Users can switch this function on/off via the APP. It is recommended to install a temperature control switch (45°C to 65°C normally closed) in series with the heating circuit as a secondary safety measure.
  • Alarm Function: Optional. The BMS can trigger external alarms when security risks like overtemperature, overcharge, or overdischarge are detected.
  • Battery Parallel Function: Optional. Supports parallel connection of battery packs for energy storage applications. Requires synchronous use with parallel modules and disabling the 'charging current limiting' function in the APP.
  • Discharge Precharge Function: Optional. Default precharge time is 5 seconds. Users can enable or disable this function via the APP. Setting precharge time to 0 disables it.
  • Emergency Switch: Standard feature. In case of issues like over-temperature, over-discharge, over-charge, or cell drop during normal use, activating the emergency switch in the APP's BMS control page will enable simultaneous charge and discharge for 30 minutes, providing emergency operational time. The BMS will continue to operate even if a single cell reaches the automatic shutdown voltage during this period.
  • Intelligent Sleep: Standard feature. Users can enable or disable this function via the APP. When the BMS is in standby (charging/discharging current less than 1A for 26 consecutive hours), it enters sleep mode to reduce self-consumption. It can be reactivated by pressing a button or connecting a charger.
  • Communication Function: Supports optional CAN/RS485 communication. Users can configure the address and communication protocol via the APP. Refer to the JIKONG Protection Board communication protocol document for details.

6. APP Operation Instructions

6.1. APP Installation

The mobile APP for the JIKONG BMS supports Android (version 7 minimum required) and iOS operating systems. You can download the APP by scanning the QR code below:

JIKONG BMS APP QR code and multi-screen display
Scan the QR code to download the JIKONG BMS mobile APP. The image also shows multi-screen display options for mobile, PC software, and LCD.

6.2. Parameter Setting

Detailed instructions for setting parameters within the APP can be found in the dedicated "Instructions for Setting Protection Board Parameters" document. This document provides comprehensive guidance on configuring various operational and protection thresholds to suit your specific battery setup and application needs.

For a complete guide to the JIKONG BMS, including detailed parameter settings and advanced configurations, please refer to the official user manual PDF: JIKONG BMS User Manual (PDF).

7. Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS, follow these general maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
  • Cleanliness: Keep the BMS unit clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
  • Temperature Control: Ensure the operating environment stays within the specified temperature range (-30°C to 70°C) to prevent damage and ensure accurate readings. If operating in cold conditions, utilize the optional heating function.
  • Firm Mounting: Ensure the BMS is securely fixed to the battery pack to prevent vibrations and physical damage.
  • Software Updates: Keep the mobile APP updated to the latest version to benefit from new features, improvements, and bug fixes.

8. Troubleshooting

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive user manual PDF.

  • BMS Not Activating: Ensure the balance cables are correctly connected and the P- and B- terminals are properly wired. Activate the BMS by connecting a charger (charger voltage 2V higher than battery voltage) or by using the optional display button.
  • Abnormal Operation/Burning: Immediately disconnect power. This often indicates incorrect wiring. Double-check all connections against the wiring diagram before attempting to power on again.
  • Protection Triggered (Overvoltage, Overcurrent, etc.): Check the battery cell voltages and currents via the APP. Verify that the protection thresholds set in the APP are appropriate for your battery type and application. Adjust parameters if necessary.
  • Short Circuit Protection Triggered: Ensure there are no external short circuits in the wiring. If the issue occurs during initial connection of a charger or load, try increasing the short circuit protection delay in the APP.
  • Bluetooth Connection Issues: Ensure the BMS is powered on and within range. Check your mobile device's Bluetooth settings. Restart both the BMS and your mobile device if necessary.
  • Inaccurate Readings: If voltage or current readings appear incorrect, perform voltage and current calibration via the APP as described in the detailed parameter setting instructions.

9. Warranty and Support

9.1. Service Commitment

JIKONG provides a 3-year warranty from the date of receipt of the goods. This warranty covers global warranty services for quality issues not caused by human factors (e.g., functional failures, component defects). The service form supports free repair or replacement, depending on the product's repairability evaluation results.

JIKONG Service Commitment details
Detailed service commitment information, including warranty scope and after-sales process.

9.2. After-Sales Process

  1. Customer Application: Submit applications through official after-sales channels (email/online customer service), providing order numbers, fault descriptions, and evidence (photos/videos).
  2. Return of Goods: The customer is responsible for the international logistics cost of sending the product back to China and providing the waybill number for tracking purposes.
  3. Packaging Requirements: Ensure product accessories are complete and packaging is intact to avoid transportation damage.
  4. Detection and Processing: After receiving the product, the quality department will complete inspection and inform repair/replacement plan within 5-7 working days. Responsibility definition: Non-human damage qualifies for free repair/replacement, with the seller bearing return international logistics costs.
  5. Return and Tracking: After repair/replacement, the product is sent back to the customer through logistics, with full tracking information provided. The return logistics cycle is typically 7-15 working days (may fluctuate due to customs clearance). For cross-border compliance, customers need to cooperate in providing necessary customs declaration documents.

10. User Tips

  • Always double-check all wiring connections, especially the balance leads, before applying power to prevent damage.
  • Utilize the mobile APP for real-time monitoring and parameter adjustments to optimize battery performance for your specific setup.
  • For cold weather operation, consider enabling the heating function to maintain battery efficiency and lifespan.
  • Keep a digital multimeter handy for verifying cell voltages during initial setup and troubleshooting.

Manufactured by Chengdu Jikong Technology Co.LTD

© 2024 JIKONG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.