PINTUDY TS-FT005

Contents

PINTUDY TS-FT005 Wireless Water Tank Liquid Level Meter User Manual

Model: TS-FT005 | Brand: PINTUDY

1. Introduction

The PINTUDY TS-FT005 is a wireless ultrasonic liquid level meter designed for monitoring water levels and temperatures in various tanks. It provides real-time data on tank water level, tank temperature, and indoor ambient temperature, along with high/low level alarms and a time display. Its wireless transmission capability and durable, waterproof design make it suitable for both home and industrial applications.

PINTUDY TS-FT005 Wireless Water Tank Liquid Level Meter with Receiver and Transmitter
Figure 1: TS-FT005 Receiver and Transmitter Overview

2. Key Features

  • Wireless Transmission: 433MHz wireless with an open-area transmission distance of 100 meters and an effective distance of 30 meters.
  • Power Supply: Transmitter features a solar charging panel and uses 6xAAA batteries (not included). Receiver uses 3xAAA batteries (not included) or a USB-C power cable.
  • Precision Sensing: Ultrasonic depth measurement range of 0.5 to 5 meters (1.64 to 16.4 feet) with ±1% accuracy.
  • Alerts: High and low water level alarms, dynamic water level bar display.
  • Multi-Parameter Monitoring: Displays tank temperature (-40°C to 60°C / -40°F to 140°F) and indoor ambient temperature (0°C to 50°C / 32°F to 122°F).
  • Durability: Transmitter is IP65 waterproof. ABS housing passes 750°C flame tests and salt spray corrosion tests.
  • Additional Functions: 12H/24H time display, backlight.
Key Features: Temperature display, Water level monitoring, Low Water Alert, Water Tank Temperature, Indoor Temperature
Figure 2: Visual Summary of Key Features

3. Package Contents

Please check the package for the following items:

  • 1 x TS-FT005 Transmitter (IP65-rated)
  • 1 x TS-FT005 Receiver
  • 1 x USB-C Power Cable (for receiver)
  • Mounting Hardware
  • User Manual (this document)

Note: AAA batteries for both the transmitter (6xAAA) and receiver (3xAAA) are NOT included and must be purchased separately.

Package contents including transmitter, receiver, USB-C cable, and manual box
Figure 3: Contents of the Product Package

4. Specifications

FeatureSpecification
Model NumberTS-FT005
Brand NamePINTUDY
OriginMainland China
CertificationCE
Water Level Measurement Range0.5 ~ 5 meters (1.64 ~ 16.4 feet)
Tank Temperature Range-40°C ~ 60°C (-40°F ~ 140°F)
Indoor Temperature Range0°C ~ 50°C (32°F ~ 122°F)
Wireless Frequency433MHz
Wireless Transmission Distance100m (open distance), 30m (effective distance)
Transmitter Power Supply6xAAA batteries (not included), Solar charging
Receiver Power Supply3xAAA batteries (not included) or Type-C Power Cable
Transmitter Waterproof RatingIP65
Alarm Duration120 seconds
Time Function12H/24H system
Transmitter Dimensions (LxWxH)6.8 x 10.9 x 16.7 cm
Transmitter Weight216g
Receiver Dimensions (LxWxH)13.5 x 2.6 x 8.4 cm
Receiver Weight184g
Product Information table with detailed specifications for TS-FT005
Figure 4: Detailed Product Specifications

5. Setup and Installation

Follow these steps for proper setup and installation of your TS-FT005 liquid level meter:

5.1. Receiver Setup

  1. Power the Receiver: Insert 3xAAA batteries (not included) into the receiver or connect it using the provided Type-C power cable.
  2. Enter Tank Depth Setting Mode: The receiver will automatically enter the tank depth setting mode. The setting range is 0.5m to 5m (1.64ft to 16.4ft). Use the '+' and '-' buttons to adjust the total tank depth.
  3. Set Air Gap Value: Press the 'SET' button to confirm the tank depth and proceed to set the air gap value. The default display is "0.50". This value represents the distance from the top of the tank (where the transmitter will be mounted) to the maximum water level. Adjust this value using the '+' and '-' buttons. The setting range is 0.5m to 5m (1.64ft to 16.4ft).
  4. (Optional) Set Automatic Water Filling Level: Some models may have an option to set an automatic water filling level. If available, press 'SET' again and use '+' and '-' to set the desired percentage (e.g., 10% to 50%). Refer to the display for specific instructions.
Step 1: Energize receiver and set tank depth
Figure 5: Receiver Setup - Step 1 (Power and Tank Depth)
Step 2: Set air gap value on the receiver
Figure 6: Receiver Setup - Step 2 (Air Gap Setting)

5.2. Transmitter Installation

  1. Power the Transmitter: Insert 6xAAA batteries (not included) into the transmitter.
  2. Mounting Location: Mount the transmitter horizontally on top of your water tank. Ensure the solar charging panel is facing the sunny side to provide continuous power and charge the rechargeable batteries.
  3. Correct Installation: The transmitter should be centered and level on the tank opening, with a clear path for the ultrasonic sensor to the water surface. Avoid obstructions inside the tank directly below the sensor.
Step 3: Transmitter power-on and installation, showing correct and faulty installation examples
Figure 7: Transmitter Installation Guide (Correct vs. Faulty)
Transmitter installed on a white water tank
Figure 8: Example of Transmitter Installation on a Tank

6. Operating Instructions

Once installed, the receiver will display real-time data from the transmitter.

6.1. Display Overview

Receiver display showing indoor temperature, time alarm, water level, backlight, and high/low water level alarm indicators
Figure 9: Receiver Display Features
  • Tank Level: Displays the current water level in meters (M) or feet (FEET).
  • Tank Temperature: Shows the temperature of the water inside the tank in °C or °F.
  • Indoor Temperature: Displays the ambient temperature where the receiver is located in °C or °F.
  • Time: Current time in 12H or 24H format.
  • Battery Indicator: Shows the battery status of the transmitter.
  • Water Level Bar: A dynamic graphical representation of the tank's water level (10% to 100%).
  • HI AL / LO AL: Indicators for High Alarm and Low Alarm.
  • EMPTY: Indicator for an empty tank.

6.2. Button Functions

  • SET: Used to enter and confirm settings (e.g., tank depth, air gap, time).
  • AL: Activates/deactivates or adjusts alarm settings (High/Low water level alarms).
  • +: Increases values during settings, or changes display modes.
  • -: Decreases values during settings, or changes display modes.
  • TANK: May be used to switch between different tank readings if multiple transmitters are supported (check specific model features) or to cycle through display units.

6.3. Alarms

The device features high and low water level alarms. When the water level reaches the set high or low threshold, an audible alarm will sound for 120 seconds, and the corresponding 'HI AL' or 'LO AL' indicator will flash on the display.

7. Maintenance

  • Battery Replacement: Replace the receiver's AAA batteries promptly when the backlight dims or if there is flickering in the display. For the transmitter, ensure the solar panel is clean and unobstructed to maximize battery life. Replace transmitter AAA batteries when the battery indicator on the receiver shows low power.
  • Cleaning: Wipe the receiver and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Transmitter Placement: Periodically check that the transmitter is securely mounted and that its solar panel is free from dirt, leaves, or snow to ensure optimal charging.

8. Troubleshooting

ProblemPossible CauseSolution
Receiver display is blank or flickeringLow or dead batteries in receiver; power cable disconnected.Replace receiver batteries (3xAAA) or ensure USB-C power cable is securely connected.
No water level reading or inaccurate readingsTransmitter batteries low/dead; transmitter not installed correctly (not level, obstructed); incorrect tank depth/air gap settings.Check/replace transmitter batteries (6xAAA). Ensure solar panel is clean. Verify transmitter is level and has a clear path to water. Re-enter tank depth and air gap settings on the receiver.
No wireless signal (receiver not showing data)Transmitter out of range; excessive obstructions between transmitter and receiver; interference.Ensure receiver is within 30 meters effective range of the transmitter. Reduce physical obstructions (e.g., thick walls). Try repositioning receiver or transmitter.
Alarm sounds unexpectedlyWater level reached set high/low alarm threshold; alarm settings are too sensitive.Check actual water level. Adjust high/low alarm thresholds using the 'AL' button on the receiver.

9. User Tips

  • Optimal Solar Charging: For best performance of the solar charging feature, ensure the transmitter's solar panel is installed in a location that receives direct sunlight for several hours a day.
  • Battery Life: Even with solar charging, it's good practice to periodically check the transmitter's battery indicator on the receiver, especially during prolonged cloudy periods or winter months, to ensure continuous operation.
  • Calibration Accuracy: Take care during the initial setup to accurately measure and input your tank's total depth and the air gap. Precise calibration is crucial for accurate water level readings.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.