1. Introduction
Thank you for purchasing the XK913 3.5-channel remote control helicopter. This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your new helicopter. Designed for both indoor and outdoor use, this helicopter features robust flight capabilities, LED lighting for night flying, and easy-to-master controls. Please read this manual thoroughly before operating the helicopter to ensure proper use and to maximize your enjoyment.
2. Safety Warnings
- ⚠ Not suitable for children under 36 months. Contains small parts which may pose a choking hazard.
- Always operate the helicopter in an open area, away from people, animals, and obstacles.
- Do not fly near high-voltage lines, trees, or water.
- Keep fingers, hair, and loose clothing away from rotating blades.
- Never leave the helicopter unattended while charging.
- Do not attempt to modify or disassemble the helicopter or its components.
- Ensure the helicopter is turned off when not in use and during transport.
3. Package Contents
Verify that all items are present in your package:
- XK913 RC Helicopter (1)
- Remote Controller (1)
- USB Charging Cable (1)
- Screwdriver (1)
- Operating Instructions (this manual) (1)




4. Specifications
| Feature | Detail |
|---|---|
| Type | HELICOPTER |
| Control Channels | 3.5 Channels |
| Material | Metal |
| Remote Control | Yes (MODE2) |
| Flight Time | 5~10 minutes |
| Charging Time | 20 minutes |
| Helicopter Battery | Included (Internal, rechargeable) |
| Controller Battery | Not Included (User-supplied) |
| Recommend Age | 14+ years |
| Features | App-Controlled (if applicable), LED Lighting, Fall Resistant |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Certification | CE |
| Video Capture Resolution | Other (if camera equipped) |
| Package Length | 28 cm |
| Package Width | 6 cm |
| Package Height | 13 cm |
| Package Weight | 0.3 kg |

5. Setup
5.1 Remote Controller Battery Installation
- Locate the battery compartment on the back of the remote controller.
- Use a screwdriver (if provided) to open the battery compartment cover.
- Insert the required batteries (e.g., AA batteries, not included) according to the polarity markings.
- Close the battery compartment cover and secure it with the screw.
5.2 Charging the Helicopter
Before first use, fully charge the helicopter's internal battery.
- Connect the small end of the USB charging cable to the charging port on the helicopter.
- Connect the large end of the USB charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light (if present) on the USB cable or helicopter will illuminate during charging and turn off or change color when fully charged.
- Charging typically takes approximately 20 minutes. Do not overcharge.
5.3 Pairing the Helicopter and Remote Controller
- Ensure both the helicopter and the remote controller are fully charged.
- Place the helicopter on a flat, level surface.
- Turn on the helicopter's power switch. The helicopter's indicator lights will flash.
- Turn on the remote controller's power switch.
- Move the throttle stick (left stick) all the way up, then all the way down. The indicator lights on both the helicopter and controller should become solid, indicating successful pairing.
- If pairing fails, turn off both devices and repeat the steps.
6. Operating Instructions
The XK913 helicopter features 3.5 channels for easy and intuitive control.
6.1 Basic Controls (MODE2)
- Left Stick (Throttle):
- Push up: Ascend (increase altitude)
- Pull down: Descend (decrease altitude)
- Right Stick (Directional Control):
- Push left: Turn left (yaw)
- Push right: Turn right (yaw)

6.2 First Flight
- Ensure you are in a safe, open environment, free from obstacles.
- Place the helicopter on a flat surface.
- Slowly push the left stick (throttle) upwards to make the helicopter ascend gently.
- Use the right stick to control the helicopter's rotation (left/right turns).
- Practice gentle ascents and descents before attempting more complex maneuvers.
- To land, slowly pull the left stick downwards until the helicopter gently touches the ground.
6.3 Night Flying with LED Lights
The helicopter is equipped with LED lights, making it suitable for flying in low-light conditions. These lights also help in maintaining orientation during flight.

6.4 Video Demonstration
7. Charging the Battery
The helicopter is powered by an internal rechargeable battery. Follow these steps for safe and efficient charging:
- Ensure the helicopter's power switch is in the "OFF" position before charging.
- Connect the USB charging cable to the helicopter's charging port.
- Plug the USB connector into a standard USB power source (e.g., computer, USB wall adapter, power bank).
- The charging indicator will show the charging status. Refer to the indicator behavior for full charge (e.g., light off, green light).
- A full charge takes approximately 20 minutes. Disconnect the charger once charging is complete.
- Do not leave the battery charging unattended for extended periods.
8. Care and Maintenance
- Cleaning: Use a soft, dry cloth to clean the helicopter. Do not use water or chemical cleaners.
- Storage: Store the helicopter and remote controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: If not used for a long period, charge the helicopter battery every 3 months to prolong its lifespan. Remove batteries from the remote controller if storing for extended periods.
- Propeller Inspection: Regularly check the propellers for any damage or cracks. Replace damaged propellers immediately to ensure safe flight.
- Impact Damage: While designed to be fall-resistant, severe impacts can cause damage. Inspect the helicopter after any crash for structural integrity.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Helicopter does not respond to remote controller. | Not paired; low battery in controller or helicopter. | Re-pair the helicopter and controller (Section 5.3). Charge helicopter battery. Replace controller batteries. |
| Helicopter cannot take off or flies weakly. | Low helicopter battery; damaged propellers. | Fully charge the helicopter battery. Check propellers for damage and replace if necessary. |
| Helicopter drifts to one side. | Trim settings incorrect; uneven surface during takeoff; damaged propeller. | Adjust the trim buttons on the remote controller. Ensure takeoff from a flat surface. Check and replace damaged propellers. |
| LED lights not working. | Helicopter not powered on; internal wiring issue. | Ensure helicopter is powered on. If problem persists, contact customer support. |
10. User Tips
- Spare Parts: If you need replacement parts like tail rotors or main blades, check with the seller or authorized distributors for genuine components.
- Controller Batteries: Always keep spare batteries for the remote controller on hand to avoid interruptions during play.
- Practice Makes Perfect: RC helicopters require practice to master. Start with gentle movements and gradually increase complexity as you gain confidence.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the documentation provided at the time of purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact the seller or the manufacturer's customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.