Smartour AHD 7-inch TFT LCD Car HD Monitor User Manual

1. Product Overview

The Smartour AHD 7-inch TFT LCD Car HD Monitor is designed to provide a clear and reliable display for various vehicle camera systems. It supports both AHD (Analog High Definition) cameras up to 1080P resolution and standard CVBS (Composite Video Broadcast Signal) cameras. The monitor features a 7-inch screen with a native resolution of 1024x600 pixels and offers two video input options: 4-PIN aviation connectors or standard AV (RCA) connectors, depending on the model purchased. It is suitable for a wide range of vehicles including trucks, excavators, bulldozers, cranes, harvesters, and other farm machinery, offering robust performance in varying temperature conditions.

Figure 1: Smartour AHD 7-inch TFT LCD Car HD Monitor

Figure 2: Monitor highlighting AHD 1080P display capabilities

2. Package Contents

Please check the package contents upon receipt. The specific cables included will depend on whether you ordered the 4-PIN or AV version.

2.1 4-PIN Version

• Smartour 7-inch AHD Monitor
• Adjustable Mounting Bracket
• Remote Control
• 4-PIN Video Input Cable
• Power Cable

Figure 3: 4-PIN Version Package Contents

2.2 AV Version

• Smartour 7-inch AHD Monitor
• Adjustable Mounting Bracket
• Remote Control
• AV (RCA) Video Input Cable
• Power Cable

Figure 4: AV Version Package Contents

3. Setup and Installation

This monitor is designed for in-dash placement and can be mounted using the provided adjustable bracket. Ensure the vehicle's power is off before beginning installation.

3.1 Mounting the Monitor

1. Attach the adjustable mounting bracket to the back of the monitor.
2. Secure the base of the bracket to a flat, stable surface in your vehicle's dashboard or desired location.
3. Adjust the monitor angle for optimal viewing. The bracket allows for a 90-degree adjustable angle.

Figure 5: Monitor with 90-degree adjustable angle stand

3.2 Wiring Connections

The monitor operates on a DC12V-24V power supply. Connect the power cable to a suitable power source in your vehicle. Ensure correct polarity (Red to positive, Black to negative/ground).

3.2.1 Rear View Camera Wiring (Common for 4-PIN and AV)

This diagram illustrates connecting a rear view camera to the monitor, typically triggering when the vehicle is in reverse.

Figure 6: Rear View Camera Wiring Diagram

• Power Connection (Monitor):
  1. Red: DC 12V+
  2. Black: GND (Ground)
• Camera Connection (Rear View):
  1. Connect the camera's video output to the monitor's video input (V1 or V2).
  2. Connect the camera's power (Red: 12V+) to the vehicle's reverse lights (12V+).
  3. Connect the camera's ground (Black: 12V-) to the vehicle's ground.
  4. Connect the monitor's BACK/Reverse (Display trigger line) to the vehicle's reverse lights (12V+). This triggers the monitor to switch to the rear camera view when reversing.

3.2.2 Front View Camera Wiring (4-PIN Example)

This diagram shows how to connect a front view camera, which may be continuously on or triggered by another event.

Figure 7: Front View Camera Wiring Diagram

• Camera Connection (Front View):
  1. Connect the camera's video output to the monitor's video input (V1 or V2).
  2. Connect the camera's power (Red: 12V+) to a switched 12V+ source in the vehicle.
  3. Connect the camera's ground (Black: 12V-) to the vehicle's ground.
  4. Connect the monitor's BACK/Reverse (Display trigger line) to a suitable trigger if automatic switching is desired, or leave unconnected for manual switching.

4. Operating Instructions

The monitor can be operated using the buttons on the front panel or the included remote control.

4.1 Front Panel Controls

• MENU: Accesses the on-screen display (OSD) menu for settings adjustments.
• V1/V2: Switches between Video Input 1 and Video Input 2.
• OK: Confirms selections within the OSD menu.
• +: Increases values or navigates up/right in the OSD menu.
• -: Decreases values or navigates down/left in the OSD menu.
• POWER: Turns the monitor on or off.
• IR: Infrared receiver for the remote control.

4.2 Remote Control

The remote control provides convenient access to all monitor functions, including power, input switching, and menu navigation. Point the remote control directly at the IR receiver on the monitor's front panel for best performance.

5. Maintenance

To ensure the longevity and optimal performance of your Smartour monitor, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the screen and exterior. For stubborn marks, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive cleaners.
• Environmental Conditions: The monitor is designed with defense-grade quality to withstand a wide range of temperatures (hot and cold environments). However, avoid exposing it to extreme direct sunlight for prolonged periods or rapid temperature changes.
• Cable Management: Ensure all cables are securely connected and routed away from moving parts or areas where they could be pinched or damaged.

Figure 8: Monitor built for defense-grade quality in hot and cold conditions

6. Troubleshooting

If you encounter issues with your monitor, refer to the following common problems and solutions:

• No Power:
  • Check all power connections to ensure they are secure and correctly wired (DC12V-24V).
  • Verify the vehicle's power source is active.
• No Signal / Black Screen:
  • Ensure the camera is powered on and functioning correctly.
  • Check the video input cable connections (4-PIN or AV) at both the camera and the monitor.
  • Press the 'V1/V2' button to cycle through video inputs.
  • Confirm the camera's signal format (AHD 1080P-25, AHD 720P-25, or CVBS) is compatible with the monitor.
  • If using a trigger wire (e.g., for reverse camera), ensure it is correctly connected and receiving power when activated.
• Distorted or Poor Quality Image:
  • Check for loose or damaged video cables.
  • Ensure the camera is clean and free from obstructions.
  • Verify the camera's resolution and signal type are optimal for the monitor.
• Buttons Not Responding:
  • If using the remote control, check its battery and ensure it's pointed at the IR receiver.
  • Try operating the monitor using the front panel buttons.

7. Specifications

Figure 9: Monitor Dimensions

Figure 10: Applicable Vehicle Models

8. Warranty and Support

For detailed warranty information and customer support, please refer to the official documentation provided by Smartour or your retailer. A comprehensive user manual in PDF format is available for download and can be accessed via this link: User Manual (PDF).

9. User Tips

• Camera Compatibility: This monitor is compatible with both 4-PIN aviation cameras and standard AV (RCA) cameras. Ensure you select the correct monitor version (4-PIN or AV) or use appropriate adapters if your camera's connector type differs.
• AHD Camera Support: The monitor fully supports AHD cameras, including 1080P and 720P resolutions, for a clearer image compared to traditional CVBS cameras. You can connect a front AHD camera to this monitor.
• Power Source: For optimal performance and to prevent flickering, ensure the monitor is connected to a stable DC12V-24V power source in your vehicle.
• Cable Length: When installing, consider the length of your camera cables. For longer runs, especially in larger vehicles, ensure high-quality shielded cables are used to prevent signal degradation.