1. Introduction
This manual provides detailed instructions for the Estardyn 2.25-inch TFT LCD module, featuring the ST7789 driver and a 76x284 resolution with an SPI interface. This compact, full-view color screen is designed for integration into various electronic projects, offering a crisp and vibrant display for data visualization, user interfaces, and more.

Figure 1: Estardyn 2.25-inch TFT LCD Module (Front and Back)
2. Specifications
Key technical specifications for the 2.25-inch TFT LCD module are provided below:
| Feature | Specification |
|---|---|
| Display Size | 2.25 inch |
| Resolution | 76x284 pixels |
| Driver IC | ST7789 |
| Interface | 4-wire SPI |
| Display Color | Colorful (RGB565 recommended) |
| Power Supply (VCC) | 2.8V ~ 3.3V |
| Operating Temperature | -20°C ~ 70°C |
| Module Dimensions (PCB) | 21.08mm (W) x 73.15mm (H) x 3.56mm (D) |
| Active Area (AA) | 14.797mm x 55.295mm |
| Viewing Direction | 12 o'clock |

Figure 2: Product Parameters and Pin Definitions

Figure 3: Mechanical Dimensions
3. Setup and Wiring
Follow these steps to correctly connect and set up your LCD module with a microcontroller.
3.1 Pin Definition
The module uses an 8-pin interface. Refer to the table and diagram below for pin assignments:
| PIN | SYMBOL | PIN | SYMBOL |
|---|---|---|---|
| 1 | GND | 5 | RST |
| 2 | VCC | 6 | DC |
| 3 | SCL | 7 | CS |
| 4 | SDA | 8 | BL |

Figure 4: Pinout and Backlight Circuit Diagram
3.2 Electrical Connections
Connect the module to your microcontroller (e.g., ESP32, ESP8266) as follows:
- GND: Connect to the ground (0V) of your microcontroller.
- VCC: Connect to a 2.8V-3.3V power supply. Ensure your microcontroller's logic levels are compatible.
- SCL (Serial Clock): Connect to the SPI clock pin of your microcontroller.
- SDA (Serial Data): Connect to the SPI data (MOSI) pin of your microcontroller.
- RST (Reset): Connect to a digital output pin on your microcontroller. This pin is used to reset the display.
- DC (Data/Command): Connect to a digital output pin on your microcontroller. This pin determines if data being sent is a command or display data.
- CS (Chip Select): Connect to a digital output pin on your microcontroller. This pin enables/disables communication with the display.
- BL (Backlight): This pin controls the backlight. Important: Connect BL to GND (0V) for the backlight to turn on. Connecting it to VCC will keep the backlight off. This allows for potential brightness control via PWM if supported by your microcontroller and driver.

Figure 5: Example Wiring with a Development Board (Displaying Text)

Figure 6: Example Wiring with a Development Board (Displaying Image)
4. Operating Instructions
To operate the display, you will typically use a microcontroller and a compatible library.
4.1 Software Libraries
For Arduino IDE users, the Adafruit GFX Library along with a specific ST7789 driver library (e.g., Adafruit_ST7789) is commonly used. Ensure you configure the library with the correct display resolution (76x284) and pin assignments.
4.2 Display Orientation and Color
- Resolution Mapping: The internal chip resolution might be 320x240, while the visible screen is 76x284. You may need to apply an offset (e.g., x=82, y=-18) and a 90-degree rotation in your software to correctly map your image to the visible area.
- Color Depth: It is recommended to use 16-bit color depth (RGB565 format) for optimal display quality. Using 24-bit color may result in a darker image.
- Color Inversion: Some users have reported that colors might appear inverted. This can often be corrected in software by applying a bitwise NOT operation (e.g.,
#define color(x) (~x)) to your color values before sending them to the display.
5. Maintenance
The Estardyn TFT LCD module is a low-maintenance component. To ensure its longevity and optimal performance:
- Cleaning: Use a soft, lint-free cloth to gently wipe the display surface. Avoid abrasive materials or harsh chemicals.
- Handling: Handle the module by its edges to avoid touching the display surface or the flexible printed circuit (FPC).
- Storage: Store the module in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your display, refer to the common problems and solutions below:
- No Backlight:
- Ensure the BL pin is connected to GND (0V). This module's backlight logic is inverted compared to some other ST7789 displays.
- Verify that VCC is supplied within the 2.8V-3.3V range.
- No Image on Display / Display is Blank:
- Check all wiring connections (GND, VCC, SCL, SDA, RST, DC, CS) for correctness and continuity.
- Confirm that your microcontroller is powered on and running the display initialization code.
- Ensure the correct ST7789 driver library is used and properly configured for the 76x284 resolution.
- Verify that the SPI communication is correctly initialized (clock speed, mode).
- Incorrect Colors / Inverted Colors:
- Try applying a color inversion in your software (e.g.,
#define color(x) (~x)). - Ensure you are sending 16-bit RGB565 color data.
- Try applying a color inversion in your software (e.g.,
- Image Appears Dark or Distorted:
- If using 24-bit color, switch to 16-bit (RGB565) as 24-bit may result in a darker image.
- For image mapping, consider applying an offset (e.g., x=82, y=-18) and a 90-degree rotation in your software, as the internal chip resolution might differ from the visible screen area.
- Backlight Brightness Adjustment (PWM) Not Working:
- The backlight circuit might be filtered, limiting the effectiveness of PWM for brightness control. The BL pin is primarily for on/off control.
7. User Tips
Based on user experiences, here are some helpful tips for using your Estardyn TFT LCD module:
- Project Versatility: The unique form factor (76x284 resolution) makes this display excellent for building smart switches, custom radio dials, or status displays where a narrow, elongated screen is beneficial. It can effectively report state and switch assignments.
- Visual Quality: Users praise the display for its crisp, colorful output and high pixel density, making it suitable for detailed visual feedback in compact applications.
- Packaging: The module is typically well-packaged in a plastic box, ensuring safe delivery and protection from damage.
8. Warranty and Support
For any technical assistance, questions, or issues not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase records handy for faster service.