Akko 5108B Plus Joy of Life Mechanical Keyboard User Manual

1. Introduction

Thank you for choosing the Akko 5108B Plus Joy of Life Mechanical Keyboard. This full-size (108-key) keyboard features a unique 'Joy of Life' aesthetic with PBT dye-sublimation keycaps, Akko V3 Piano Pro switches, vibrant RGB backlighting, and versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). This manual provides essential information for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance and longevity.

2. Package Contents

Please check the package for the following items:

• Akko 5108B Plus Joy of Life Mechanical Keyboard
• USB Type-C Cable
• 2.4G Wireless Receiver
• Keycap Puller
• Switch Puller
• User Manual (this document)

3. Setup and Connection

3.1 Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the USB Type-C cable to the keyboard's port and the other end to a powered USB port on your computer or a USB wall adapter. The keyboard has a built-in 3000mAh battery.

3.2 Connecting the Keyboard

The Akko 5108B Plus supports three connection modes:

• Wired Mode:
  1. Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
  2. Connect the USB Type-C cable from the keyboard to your computer's USB port.
  3. The keyboard should be recognized automatically by your operating system.
• 2.4G Wireless Mode:
  1. Locate the 2.4G wireless receiver (dongle) in the package.
  2. Plug the 2.4G receiver into an available USB port on your computer.
  3. Set the keyboard's mode switch to '2.4G' (often indicated by a wireless icon).
  4. The keyboard should connect automatically. If not, press Fn + F1 (or the designated pairing key) to initiate pairing.
• Bluetooth Mode:

  The keyboard supports Bluetooth 5.0 and can connect to multiple devices.

  1. Set the keyboard's mode switch to 'Bluetooth' (indicated by a Bluetooth icon).
  2. On your computer or device (Windows, macOS, iOS, Android), open Bluetooth settings.
  3. To enter pairing mode on the keyboard, press and hold Fn + E/R/T/Y/U (for Bluetooth device 1-5 respectively) for 3-5 seconds until the indicator light flashes rapidly.
  4. Select 'Akko 5108B Plus' from the list of available Bluetooth devices on your computer/device and follow any on-screen prompts to complete pairing.
  5. To switch between paired Bluetooth devices, press Fn + E/R/T/Y/U briefly.

3.3 Software Installation (Akko Cloud Driver)

For advanced customization of RGB lighting, macros, and key remapping, download and install the Akko Cloud Driver software from the official Akko website. This software is compatible with Windows operating systems.

4. Operating Instructions

4.1 RGB Backlighting Control

The keyboard features customizable RGB backlighting with over 16 million color options per key. You can control the lighting effects via:

• Keyboard Hotkeys: Use Fn + various keys (refer to the keyboard's specific key combinations, often indicated on the keycaps or in the software manual) to cycle through lighting modes, adjust brightness, and change animation speed.
• Akko Cloud Driver: For full customization, including per-key lighting, custom effects, and synchronization, use the Akko Cloud Driver software. This allows for precise control over colors, patterns, and speeds.

4.2 Macro Programming

The Akko 5108B Plus supports Akko Macro V1.0 for creating custom macros. Use the Akko Cloud Driver software to record and assign complex key sequences to specific keys, enhancing productivity and gaming performance.

4.3 N-Key Rollover (NKRO)

The keyboard supports N-Key Rollover, meaning every key press is registered independently, preventing ghosting or missed key presses even when multiple keys are pressed simultaneously. This feature is active in wired and 2.4G modes.

4.4 Adjustable Height

The keyboard is designed with a tilting stand offering 3 levels of height adjustment. This allows you to customize the typing angle for improved ergonomics and comfort.

5. Maintenance

5.1 Cleaning the Keyboard

• Disconnect the keyboard from all power sources before cleaning.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and frame.
• For dust and debris between keycaps, use compressed air or a small brush.
• To deep clean keycaps, use the provided keycap puller to remove them. Wash keycaps with mild soap and water, rinse thoroughly, and ensure they are completely dry before reattaching.

5.2 Hot-Swapping Switches

The Akko 5108B Plus features hot-swappable sockets, allowing you to change switches without soldering. It supports both 3-pin and 5-pin mechanical switches.

1. Using the provided switch puller, carefully grip the switch from the top and bottom clips.
2. Gently pull the switch straight up to remove it from the PCB.
3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
4. Press the new switch firmly into place until it clicks. Test the key to ensure it functions correctly.

5.3 Battery Care

• Avoid exposing the keyboard to extreme temperatures.
• Do not fully discharge the battery frequently; recharge when the battery level is low.
• If storing the keyboard for an extended period, charge it to about 50% to prolong battery life.

6. Troubleshooting

6.1 Keyboard Not Responding

• Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
• 2.4G Wireless Mode: Check if the 2.4G receiver is properly plugged in. Ensure the keyboard is in 2.4G mode. Try re-pairing by pressing Fn + F1.
• Bluetooth Mode: Verify the keyboard is in Bluetooth mode and paired correctly. Re-pair if necessary (Fn + E/R/T/Y/U). Ensure your device's Bluetooth is enabled.
• Check the keyboard's battery level and charge if low.

6.2 RGB Backlighting Not Working/Incorrect

• Ensure the RGB lighting is not turned off via hotkeys (e.g., Fn + L-Alt).
• Adjust brightness using Fn + Up/Down arrow keys.
• If using Akko Cloud Driver, ensure the software is running and settings are applied.
• Try resetting the keyboard to factory defaults (refer to the Akko Cloud Driver manual for specific instructions).

6.3 Keys Not Registering or Double-Typing

• This could indicate a faulty switch. Use the switch puller to remove the problematic switch and replace it with a new one.
• Ensure the switch is fully seated in the socket.
• Clean any debris around the switch socket.

6.4 Battery Not Charging

• Ensure the USB-C cable is functional and connected to a working power source.
• Try a different USB-C cable or charging port.
• Verify the keyboard's power switch is in the 'On' position (if applicable for charging).

7. Specifications

8. User Tips

• Experiment with RGB: Take time to explore the various RGB lighting effects and customization options available through the Akko Cloud Driver to personalize your setup.
• Macro Efficiency: Utilize the macro programming feature for repetitive tasks in work or complex combos in gaming to significantly boost your efficiency.
• Ergonomic Adjustment: Don't forget to adjust the keyboard's height using the built-in stand to find the most comfortable typing angle for long sessions.
• Switch Customization: If you desire a different typing feel, take advantage of the hot-swappable sockets to easily try out various 3-pin or 5-pin mechanical switches without needing to solder.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the official Akko customer support or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.