FOXBOX FB0082 Military Analog Digital Watch

1. Introduction

The FOXBOX FB0082 is a robust analog-digital wristwatch designed for men, combining fashion, casual, sport, and business styles. It features a precise quartz calendar movement and a durable hardened mineral glass dial window. This manual provides essential information for setting up, operating, and maintaining your watch.

2. Key Features

• Analog and Digital Display
• Stopwatch function
• Shock Resistant construction
• LED Display with Luminous backlight
• Automatic Date display
• Chronograph functionality
• Complete Calendar display
• Diver-style design
• Multiple Time Zone support
• Water-Resistance up to 5 ATM (50 meters)
• Alarm function
• Swim-friendly design
• Week Display
• Luminous Hands

3. Specifications

4. Initial Setup

Before using your watch, please set the correct time and date.

4.1 Setting Analog Time

1. Gently pull out the crown (the knob on the right side of the watch) to the second click position.
2. Rotate the crown to move the analog hands to the desired time.
3. Once set, push the crown back in fully to secure the time and start the analog movement.

4.2 Setting Digital Time and Date

The digital display features several modes, including time, date, alarm, and chronograph. Use the buttons as indicated in the diagram below:

1. Press the Switching Mode button (bottom left) repeatedly to cycle through the digital display modes until you reach the desired setting mode (e.g., Time setting or Date setting).
2. Once in the desired setting mode, press and hold the Reprovision button (bottom right) until the digits start flashing, indicating adjustment mode.
3. Use the Start/Stop button (top right) to adjust the flashing value (e.g., hours, minutes, year, month, day).
4. Press the Illuminated Button (top left) to move to the next value you wish to adjust.
5. After all adjustments are made, press the Reprovision button (bottom right) again to save the settings and exit adjustment mode.

5. Operating Instructions

5.1 Luminous Display

To activate the backlight for the digital display in low-light conditions, press the Illuminated Button (top left).

5.2 Chronograph (Stopwatch)

1. Press the Switching Mode button (bottom left) repeatedly until the chronograph mode is displayed on the digital screen.
2. Press the Start/Stop button (top right) to start the stopwatch.
3. Press the Start/Stop button again to pause the stopwatch.
4. Press the Reprovision button (bottom right) to reset the stopwatch to zero.

5.3 Alarm Function

1. Press the Switching Mode button (bottom left) repeatedly until the alarm setting mode is displayed.
2. Press and hold the Reprovision button (bottom right) to enter alarm adjustment mode. The alarm time digits will flash.
3. Use the Start/Stop button (top right) to adjust the alarm time.
4. Use the Illuminated Button (top left) to toggle the alarm on/off or select other alarm settings (e.g., hourly chime).
5. Press the Reprovision button (bottom right) again to save the settings and exit.

5.4 Date and Week Display

The watch automatically displays the date and day of the week on its digital screen. Ensure the digital time is set correctly for accurate date and week display.

5.5 Multiple Time Zones

This watch supports multiple time zones. Use the Switching Mode button to navigate to the time zone setting mode and follow the adjustment steps similar to setting the digital time to configure and switch between different time zones as needed.

6. Maintenance

6.1 Water Resistance

The watch is water-resistant up to 5 ATM (50 meters), suitable for daily use, splashes, and short periods of swimming. However, it is NOT suitable for:

• Hot water showers or warm water baths, as water vapor can penetrate the watch.
• Diving or snorkeling.
• Operating buttons underwater.

6.2 Cleaning

Wipe the watch regularly with a soft, dry cloth. For the silicone band, a mild soap solution and water can be used, followed by thorough drying. Avoid abrasive cleaners.

6.3 Chemical Avoidance

Avoid contact with cosmetics, perfumes, cleaning agents, or any chemical and corrosive daily necessities. These substances can corrode the electroplating color on the watch surface and damage the seals, compromising water resistance.

6.4 Temperature Extremes

Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and movement accuracy.

7. Troubleshooting

• Watch not running: Ensure the analog crown is fully pushed in. If the digital display is off, the battery might be depleted.
• Incorrect Time/Date: Re-adjust the time and date settings as per the "Initial Setup" section.
• Fogging inside the dial: This indicates moisture ingress. Stop using the watch immediately and seek professional service. Avoid exposing the watch to hot water or steam.
• Buttons not responding: Ensure the watch is not underwater when operating buttons. If buttons are stiff or unresponsive, gently clean around them. If the issue persists, professional service may be required.

8. User Tips

No specific user tips were available from the provided buyer reviews or Q&A content. However, general advice for analog-digital watches includes familiarizing yourself with each button's function to easily switch between modes and settings. Regularly check the battery if the digital display starts to dim.

9. Warranty and Support

This product is covered by the manufacturer's standard warranty. For any issues, repairs, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.