1. Product Overview
The SUMRY HGX 4KW 110V is a versatile off-grid hybrid solar inverter designed to provide reliable power for various applications. It features a pure sine wave output, an integrated MPPT solar charge controller, and a user-friendly touch screen LCD display. This inverter is capable of operating with or without a battery, offering flexibility for different solar power system configurations.
Key Features:
- 4KW 24VDC / 110/120VAC Pure Sine Wave Output
- Built-in 140A MPPT Solar Charge Controller (Max PV 5600W)
- 6.25-inch Touch Screen LCD Display
- Tempered Glass Upper Cover
- SBU Mode: Utility power, battery, and PV power complement each other
- High PV Input Range: 55V-350Vdc
- Smart Battery Charger Design for Optimized Battery Performance
- Configurable AC/Battery Input Priority via LCD Setting
- Cold Restart Function
- Optional WiFi Monitoring via SmartESS App
- Silent Fan Operation
Protection Systems:
The inverter incorporates intelligent protection systems for enhanced safety and longevity:
- Overload Protection
- Overheating Protection
- High/Low Voltage Protection
- Battery Protection
- Short Circuit Protection
- Overcurrent Protection
- Anti-Reverse Protection
- Power Failure Protection


2. Setup and Installation
Safety Precautions:
- All wiring must be performed by qualified personnel.
- Ensure a DC circuit breaker is installed separately between the inverter and PV modules.
- Use appropriate cable for PV module connection to ensure system safety and efficient operation.
- Verify all connections are secure before powering on the unit.
Connection Ports:

- PV Input: Connect solar panel arrays.
- AC Input: Connect to utility grid or generator.
- AC Output: Connect to household appliances or load center.
- Battery Input: Connect to 24V battery bank (positive and negative terminals).
- RS458/RS232 Communication Port: For data communication and optional WiFi module connection.
PV Connection Guidelines:

When selecting proper PV modules, consider the following parameters:
- Open circuit Voltage (Voc) of PV modules must not exceed the maximum PV array open circuit voltage of the inverter (350Vdc).
- Open circuit Voltage (Voc) of PV modules should be higher than the minimum PV Array MPPT Voltage range (55Vdc).
Recommended Wire Size for PV Connection:
| Model | Wire Size | Cable (mm²) | Torque Value (max) |
|---|---|---|---|
| 3.0KW/4.0KW | 1 x 12AWG | 4 | 1.2 Nm |
Solar Panel Wiring Methods:

- In Series: Increases the voltage of the system. The total voltage needs to be less than the hybrid inverter's maximum input Voc. The entire photovoltaic system should use the same type of photovoltaic panel.
- In Parallel: Increases the current of the system. The total current should not exceed the maximum PV input current of the hybrid inverter.
- PV Cable Dimensions: Recommended 6-8A/mm².
3. Operation
LCD Display and Function Keys:

The inverter features a 6.25-inch touch screen LCD display for monitoring and configuration. The display shows real-time status, charging, and fault indicators.
LED Indicators:
| LED Indicator | Color | Messages |
|---|---|---|
| AC/INV | Green | Solid On: Output is powered by utility in Line mode. Flashing: Output is powered by battery or PV in battery mode. |
| CHG | Green | Solid On: Battery is fully charged. Flashing: Battery is charging. |
| FAULT | Red | Solid On: Fault occurs in the inverter. Flashing: Warning condition occurs in the inverter. |
Function Keys:
| Function Key | Description |
|---|---|
| ESC | To exit setting mode |
| UP | To go to previous selection |
| DOWN | To go to next selection |
| ENTER | To confirm the selection in setting mode or enter setting mode |
Operating Modes:
The inverter supports SBU mode, where utility power, battery, and PV power work together to supply the load. Input priority (AC/Battery) can be configured via the LCD settings.
Battery Compatibility:

The inverter is compatible with various 24V battery types, including:
- Flooded
- Gel
- Lithium-iron phosphate (LiFePO4)
- Lithium-ion
- AGM/Sealed
- User custom Battery settings
Remote Monitoring (Optional):

With the optional WiFi module, you can monitor and control your inverter remotely using the SmartESS App on your smartphone or tablet.
4. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your SUMRY HGX inverter.
- Cleaning: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can hinder cooling. Use a soft, dry cloth.
- Connections: Regularly check all electrical connections (PV, AC input/output, battery) for tightness and signs of corrosion. Loose connections can cause overheating and poor performance.
- Ventilation: Ensure the inverter is installed in a well-ventilated area, free from obstructions, to allow for proper heat dissipation.
- Environment: Keep the inverter away from direct sunlight, moisture, and corrosive substances.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure your inverter has the latest features and bug fixes.
5. Troubleshooting
This section provides guidance for common issues. For more complex problems, contact technical support.
LED Indicator Warnings:
- FAULT (Red Solid On): Indicates a fault condition. Refer to the inverter's detailed error codes (if available in the full manual) or contact support.
- FAULT (Red Flashing): Indicates a warning condition. This might be due to temporary issues like high temperature or low battery voltage. The inverter may recover automatically once conditions normalize.
Common Questions:
- Does it work without a battery? Yes, the inverter can operate without a battery in certain modes, typically for direct PV to load or grid-tie applications. However, for energy storage and continuous power supply during outages or at night, a 24V battery bank is required.
- How to configure grid modes (Off-Grid/On-Grid)? The inverter is a hybrid model, supporting both off-grid and on-grid functionalities. Specific settings for grid modes and power priority (e.g., SBU mode) are configured via the LCD display using the UP, DOWN, and ENTER buttons. Refer to the detailed settings menu in the comprehensive user manual for step-by-step instructions.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | SUMRY |
| Model Number | HGX 4KW 110V |
| Size | 400*250*89MM |
| Weight | 12KG |
| Output Type | SINGLE |
| Output Current | 20A |
| Output Frequency | 50/60Hz |
| Is Smart Device | Yes |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Supported Battery Types | Lead acid battery, lithium battery, Lifepo4 battery, etc. |
| Input Voltage | 110/120V |
| Selectable Voltage Range | 90/140 VAC |
| Wave Form | Pure Sine Wave |
| Battery Voltage | 24V |
| MPPT Voltage Range | 55-280VDC |
| Max PV Array Power | 5600W |
| Max PV Array Open Circuit Voltage | 350VDC |
| Max Charging Current | 140A (AC charger + solar charger) |
7. Warranty and Support
The SUMRY HGX 4KW 110V Off Grid Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase.
For technical assistance, troubleshooting, or warranty claims, please contact your seller or the SUMRY official support channel. Ensure you have your purchase details and product serial number available.
8. User Tips
- Quiet Operation: Users have noted the inverter operates with a silent fan, contributing to a quieter environment.
- Battery Flexibility: While the inverter can function without a battery in certain direct PV-to-load scenarios, consider adding a compatible 24V battery bank for energy storage and uninterrupted power supply.
- App Monitoring: Utilize the optional WiFi module and SmartESS App for convenient remote monitoring and control of your solar system.