Product Overview
The MICTUNING Kill Switch Remote Control is a versatile battery disconnect isolator designed for 12V and 24V systems. It features a wireless remote control for convenient power management, a digital display for real-time voltage monitoring, and LED indicators for battery status. This device helps prevent battery drain during long-term parking and offers anti-theft functionality.

Image: MICTUNING Kill Switch Remote Control with a blue SUV in the background, highlighting its features like real-time digital display, no wiring modification, instant start, and anti-shutdown lock.

Image: The MICTUNING Kill Switch shown with two remote controls, emphasizing its wireless operation.
Package Contents
- Remote Battery Disconnect Switch Unit
- Two Wireless Remote Controls
- Connecting Wires/Terminals
- Instruction Manual (PDF available online)
Video: An unboxing video demonstrating the contents of the MICTUNING Kill Switch package.
Setup and Installation
This kill switch is designed for a 5-minute, tool-free installation. It works with both 12V and 24V systems (operating range 6-14V DC / 19-28V DC). Simply attach it directly to your battery terminals. No wire cutting or splicing is required.
Important: Always disconnect the battery before installation to prevent electrical hazards.
Compatibility
This kill switch is compatible with 12V/24V battery systems. It is specifically designed for flat-top batteries ONLY. It is NOT compatible with batteries that have raised terminals or other non-flat-top designs.

Image: A visual guide indicating that the kill switch is only compatible with flat-top batteries, showing incompatible battery types crossed out.
Wiring Diagram
Refer to the schematic diagram below for proper connection. Ensure the positive and negative connections are correctly made to avoid damage to the device or vehicle electrical system.

Image: Schematic diagram showing the connection points for the double magnetic latching relay, connecting to the battery positive, removed negative pole line, and negative pole pile head.
Connection Steps:
- Connect the main unit to the battery positive terminal.
- Connect the removed negative pole line to the designated terminal on the switch.
- Connect the switch's negative pole pile head to the battery negative terminal.

Image: The MICTUNING Kill Switch installed on a car battery, showing the positive wire, switch clamp, and negative wire connections.
Operating Instructions
Remote Control Operation
Use the included wireless remote controls to switch the battery on or off from a distance. Press the 'ON' button to connect power and the 'OFF' button to disconnect power.

Image: A hand holding one of the remote controls, demonstrating its use to switch the battery on/off from afar, with a blue SUV in the background.
Digital Display and LED Indicators
The smart LED voltage display monitors battery voltage in real-time. The unit features 5 LED indicators: Work, Protection, High, Mid, and Low.
- Work: Indicates the switch is active.
- Protection: Indicates the device is in protection mode (e.g., low voltage alarm).
- High: For 12V systems, voltage is >13.2V.
- Mid: For 12V systems, voltage is 11.8V-13.2V.
- Low: For 12V systems, voltage is <11.8V.
Automatic Power Disconnection
The device automatically disconnects power when the voltage drops below 11.8V (for 12V systems) or 23V (for 24V systems). An alarm will sound for 60 seconds before the power is cut off after 120 seconds. This feature prevents battery drain during extended parking.

Image: Diagram illustrating the device's behavior at different voltage levels. If voltage is <11.8V, an alarm sounds after 60s, and power cuts off after 120s. If voltage is >13.3V, the remote control function fails, requiring manual switch operation.
Magnetic Latching Function
The magnetic latching relay ensures ultra-low power consumption with a standby current of only 3mA, making it energy-saving and ideal for long-term use without significant battery drain.

Image: Illustration of the magnetic latching function, highlighting its extremely low standby current of 0.003A (3mA) for energy efficiency, contrasting it with higher power consumption of electromagnetic switches.
Maintenance
- Keep the device clean and dry.
- Regularly check all connections to ensure they are secure and free from corrosion.
- The ultra-low 3mA standby current means minimal battery drain, reducing the need for frequent battery charging during storage.
Troubleshooting
- Remote Control Not Responding (Voltage > 13.7V/26.3V): If the voltage exceeds 13.7V (for 12V systems) or 26.3V (for 24V systems), the remote control function is temporarily disabled. This is a safety feature to prevent accidental triggering while driving, which could cause the vehicle to lose power. The remote function will resume once the voltage returns to the normal operating range. In this situation, use the manual switch to cut off power if needed.
- Automatic Power Cut-off (Voltage < 11.8V/23V): If the battery voltage drops below 11.8V (12V) or 23V (24V), the device will issue an alarm after 60 seconds and automatically cut off power after 120 seconds to protect the battery from deep discharge. Recharge your battery if this occurs.
- Temporary Remote Failure due to Ignition: Temporary voltage fluctuations caused by the car's ignition may lead to a temporary failure of the remote control. The remote will resume normal operation once the voltage stabilizes.
Specifications

Image: Detailed specifications table and dimensions of the MICTUNING Kill Switch, including applied voltage, current ratings, and operating temperature.
| Feature | Specification |
|---|---|
| Applied Voltage | 12V/24V Systems |
| Voltage Range | 6-14V DC (for 12V) / 19-28V DC (for 24V) |
| Working Temperature | -20°C to 85°C (-4°F to 185°F) |
| Rated Current of Switch | 240A |
| Surge Current of Switch | 500A |
| Automatic Power Off Voltage | 11.8±0.2V (for 12V) / 23±0.4V (for 24V) |
| Low-Voltage Delay Disconnection | 120 seconds (after 60s alarm) |
| Standby Current | 3mA |
| Shutdown Threshold (Remote Disable) | 13.7V (for 12V) / 26.3V (for 24V) |
| Dimensions (approx.) | Width: 2.36 in, Height: 3.35 in, Depth: 1.34 in |
User Tips
- Easy Installation: Many users find the installation straightforward due to clear mounting points.
- Battery Protection: The automatic low-voltage cut-off is highly effective in preventing battery drain, especially for vehicles stored for extended periods.
- Remote Convenience: The wireless remote control adds significant convenience for disconnecting power without needing to access the battery directly.
Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. A detailed user manual in PDF format is available for download: View User Manual (PDF).