NEWBOLER LIG001 GPS Bicycle Front Light with Horn User Manual

1. Product Overview

The NEWBOLER LIG001 is a versatile 3-in-1 device designed for bicycles, integrating a GPS computer, a high-brightness front light, and a horn. It aims to simplify your handlebar setup by combining multiple essential functions into one compact unit.

Key Features:

• Multi-satellite positioning (Beidou, GPS, GLONASS, GALILEO, QZSS) for accurate data.
• High-brightness dual T6 LED lamp head with 4 lighting modes.
• Integrated high-decibel speaker with 3 switchable sounds.
• USB rechargeable 4000mAh battery.
• Automatic time calibration via satellite.
• IPX6 waterproof rating.

2. Setup and Installation

Follow these steps to properly install your LIG001 device on your bicycle handlebar.

1. Place the bracket: Position the mounting bracket onto your bicycle handlebar.
2. Insert screws: Put the screws into the designated holes on the bracket.
3. Tighten screws: Use a screwdriver to securely tighten the screws, ensuring the bracket is firm.
4. Mount the lamp: Slide the LIG001 unit into the corresponding position on the bracket.
5. Rotate and finish: Rotate the bracket to your desired viewing angle and ensure it is securely fastened.

Connecting the Wired Controls:

The LIG001 includes wired controls for the horn and light, allowing for safer operation without removing your hands from the handlebars.

• Attach the wired control unit to a convenient location on your handlebar using the provided rubber band.
• Plug the wired control cable into the designated interface on the LIG001 unit.

3. Operating Instructions

Power On/Off and Backlight:

• Power On: Long press the 'SET' button to power on the device.
• Backlight Control: Long press the 'SET' button for 5 seconds to switch the backlight on or off. This allows you to adjust visibility based on ambient light conditions.

GPS Functionality and Satellite Connection:

The LIG001 features multi-satellite positioning for accurate data tracking.

• Upon switching on, the device will automatically search for satellite signals.
• The first time you use it, or if you are in an unfamiliar area, it may take 1-3 minutes to establish a connection.
• The satellite icon on the display will stop flashing once a successful connection is made.
• The device has satellite memory, so subsequent uses in familiar areas will result in faster connection times.
• The satellite time is automatically calibrated upon successful connection.

Display Information:

The device's display provides various cycling metrics. Use the 'MODE' button to switch between different views.

• SET Button (Left Click): Switches between Total Mileage, Total Time, This Time, Clock, and Calorie display.
• MODE Button (Right Click): Switches between Current Speed, Maximum Speed, and Average Speed display.

Lighting Modes:

The dual T6 LED lamp head offers four lighting modes. Use the wired light control button to cycle through them.

• Single Light On
• Strong Light (Dual Light)
• Dim Light (Dual Light)
• Flashing

Horn Operation:

The integrated horn provides a 120dB sound for safety. It has 3 different sound types.

• Press the horn button on the wired control to activate the horn.
• Long press the horn button for 10 seconds to switch between the 3 available sound types.

4. Maintenance and Charging

Charging:

The LIG001 is equipped with a 4000mAh rechargeable battery. Charge the device using the Micro USB port.

• Connect the provided USB cable to the Micro USB port on the device.
• Connect the other end of the cable to a suitable USB power source (e.g., computer, wall adapter).
• Ensure the device is fully charged before long rides to maximize battery life.

Water Resistance:

The device has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can be used in the rain but is not recommended for prolonged immersion in water. Always ensure the charging port cover is securely closed to maintain water resistance.

5. Troubleshooting

• GPS Signal Acquisition Time: If the device takes a long time to acquire a GPS signal (more than 3 minutes), ensure you are in an open area with a clear view of the sky. The first use or use in a new location may take longer.
• Screen Visibility: If the screen is not clearly visible under certain angles or bright conditions, adjust the viewing angle or activate the backlight by long-pressing the 'SET' button for 5 seconds.
• No GPS Data on App: This device displays GPS data directly on its screen and does not require a separate mobile application for data viewing. All relevant metrics are shown on the integrated display.

6. Specifications

Note: Manual measurements may have slight errors.

7. User Tips

• For optimal screen visibility, especially in varying light conditions, utilize the manual backlight feature by long-pressing the 'SET' button for 5 seconds. Adjust the device's angle on the handlebar if needed.
• When first using the GPS function or after traveling to a new region, allow a few extra minutes for the device to acquire satellite signals for accurate positioning and time calibration.
• Keep the Micro USB charging port cover securely closed to maintain the device's IPX6 water resistance, especially when riding in wet conditions.

8. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF available for download. This document provides comprehensive guidance on product usage and care.

You can access the full user manual here: NEWBOLER LIG001 User Manual (PDF)