1. Introduction
The HIROYASU HW-UV910 is a versatile dual-band walkie talkie designed for reliable communication across a wide range of frequencies. Featuring a 1.77-inch HD display, 20W ultra-high power output, and 1024 memory channels, it offers advanced functionalities such as scrambler, DTMF, NOAA weather forecast reception, and FM radio. This manual provides essential information for setting up, operating, and maintaining your device.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 × HIROYASU HW-UV910 Radio Body
- 1 × 12.6V 2400mAh Li-ion Battery Pack
- 1 × SMA-Female FM/136-174/400-470MHz High Gain Antenna
- 1 × Desktop Charger
- 1 × Belt Clip
- 1 × Hand Strap
- 1 × English User Manual
- 1 × Type-C Programming Cable (Optional)
3. Product Overview
Familiarize yourself with the components of your HW-UV910 walkie talkie:

4. Setup
4.1 Battery Installation
To install the battery, first ensure the walkie talkie is powered off. Locate the battery compartment on the back of the device. Align the battery pack with the contacts and slide it into place until it clicks securely. To remove, press the release latch and slide the battery out.
4.2 Antenna Attachment
Screw the provided SMA-Female antenna onto the antenna connector at the top of the walkie talkie. Ensure it is hand-tightened for optimal performance.
4.3 Charging
The HW-UV910 can be charged using either the desktop charger or a Type-C cable. For desktop charging, place the walkie talkie into the charging cradle. For Type-C charging, connect a compatible Type-C cable to the port on the side of the device.


5. Operating Instructions
5.1 Power On/Off
To power on the device, rotate the Volume Knob clockwise until the screen illuminates and you hear a 'Welcome' prompt. To power off, rotate the Volume Knob counter-clockwise until the screen turns off.
5.2 Frequency Setting
The device supports a wide frequency range including FM Commercial Radio (64-108MHz Rx), Air Band (108-136MHz Rx), FM (136-174MHz Tx&Rx), FM (18-999.99975MHz Tx&Rx), and FM (400-520MHz Tx&Rx). Use the keypad to directly input desired frequencies or navigate through the menu options to adjust frequency steps (0.25KHz to 500KHz).

5.3 Channel Setting
The HW-UV910 has 1024 memory channels. Channels can be selected using the Channel Knob or by navigating through the 'Channel Set' menu. You can configure various parameters for each channel, including CTC/DCS, bandwidth, and scrambler settings.
5.4 Dual Standby
The Dual Standby feature allows the walkie talkie to monitor two different frequencies or channels simultaneously. To activate or deactivate Dual Standby, navigate to the 'Basic Set' menu, select 'Dual Standby', and choose 'On' or 'Off'.

5.5 Scrambler
The scrambler function encrypts your voice transmission for privacy. The HW-UV910 offers 8 groups of scrambler settings. To enable or select a scrambler group, go to the 'Channel Set' menu, find 'Scrambler', and choose your desired group (1-8) or 'OFF' to disable.

5.6 DTMF (Dual-Tone Multi-Frequency)
The DTMF feature allows for sending specific tones for various functions, such as controlling repeaters or other devices. Access DTMF settings through the menu to configure options like TX Start, TX End, or TX Start & End.

5.7 NOAA Weather Forecast
Stay informed with the built-in NOAA weather forecast reception. This feature provides access to weather alerts and forecasts. Navigate to the NOAA Weather menu to select different weather channels (e.g., WH-01, WH-02).

5.8 FM Radio
The walkie talkie includes an FM radio receiver (65-108MHz). To access the FM radio, navigate to the 'FM Radio' menu option. You can then scan for stations or manually tune to a frequency.

5.9 Key Define
The side keys (Side Key 1 S, Side Key 1 L, Side Key 2 S, Side Key 2 L) can be customized to quickly access various functions. To define these keys, go to the 'Key Define' menu and assign functions such as Freq Detect, CTC/DCS Scan, H/L Power, Scanning, or FM Radio.

5.10 Mic/SPK Gain Adjustment
Adjust the microphone (MIC) and speaker (SPK) gain levels to optimize audio quality. These settings can be found in the 'Analog Set' menu. Adjust the values from 01 to 18 for MIC Gain and 01 to 58 for SPK Gain.

5.11 Frequency Detect
The Frequency Detect feature helps identify active frequencies. This can be assigned to a side key for quick access.

5.12 CTC/DCS Scan
The CTC/DCS Scan function allows the device to scan for Continuous Tone-Coded Squelch System (CTCSS) or Digital-Coded Squelch (DCS) tones, which are used to filter out unwanted transmissions. This feature can be accessed via the menu or assigned to a side key.
6. Maintenance
6.1 Cleaning
Use a soft, damp cloth to clean the exterior of the walkie talkie. Do not use harsh chemicals or abrasive cleaners.
6.2 Battery Care
To prolong battery life, avoid overcharging and fully discharging the battery. Store the battery in a cool, dry place when not in use.
6.3 Storage
When storing the device for extended periods, remove the battery and store the walkie talkie in a dry, dust-free environment.
7. Troubleshooting
7.1 No Power
- Check if the battery is properly installed and charged.
- Ensure the Volume Knob is rotated clockwise to turn on the device.
7.2 Cannot Transmit or Receive
- Verify the antenna is securely attached.
- Check if the frequency or channel settings are correct and within the device's operating range.
- Ensure the battery has sufficient charge.
- Check CTC/DCS settings if enabled, as incorrect settings can block communication.
7.3 Poor Audio Quality
- Adjust MIC/SPK gain settings in the 'Analog Set' menu.
- Ensure the antenna is properly connected.
- Check for obstructions between devices or if you are at the edge of the communication range.
7.4 Display Not Working
- Check battery level.
- Try powering the device off and on again.
8. Specifications
| Category | Parameter | Value |
|---|---|---|
| General | Frequency Range | FM: 64-108MHz (Rx), Rx: 18-999.99999MHz (AM/FM), TX: 136-174MHz, 400-480MHz |
| Channel Capacity | 1024 + 2 VHF Channel | |
| Channel Spacing (W/N) | Analog: 25kHz/12.5kHz | |
| Voltage | 12.4V DC | |
| Working Mode | Same Frequency simplex, different frequency simplex | |
| Antenna | Removable Antenna | |
| Frequency Stability | ±2.5ppm | |
| Working Temperature | -20°C ~ 60°C | |
| Dimensions | 155*65*45mm | |
| Weight | About 395g | |
| Transmitting | Output Power | ≤20W |
| Modulation Mode | F3E | |
| Maximum Deviation (W/N) | ≤5KHz/≤2.5KHz | |
| Tx Current | ≤3000mA | |
| Receiving | Sensitivity (W/N) | 0.22uV/0.25uV 12dB SINAD |
| Inter Modulation (W/N) | 65dB/60dB | |
| Audio Distortion | <5% | |
| Audio Output Power | ≤1W (16ohm) | |
| RX Current | ≤350mA |
Note: The above parameters are subject to change without prior notice.
9. User Tips
The HIROYASU HW-UV910 offers a very wide frequency range, including CB band reception. Users have inquired about its TX/RX capabilities on the CB band (26-39 MHz). While the device has broad reception capabilities, always refer to local regulations and licensing requirements for transmission on specific frequency bands.
10. Warranty & Support
For warranty information and technical support, please refer to the official HIROYASU website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.