1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the JIKONG JKBMS V19 4.3 Inch LCD Smart Touch Screen Display. This display is specifically designed to interface with the JIKONG PB Serial BMS V19 version, offering real-time monitoring and control capabilities for your battery management system.
2. Setup and Installation
2.1. Package Contents
- JIKONG JKBMS V19 4.3 Inch LCD Smart Touch Screen Display
- Display Cable (standard length 0.5 meters, customizable)
- Switch Key Connector
2.2. Connection Overview
The display connects to the JIKONG PB Serial BMS V19 via a dedicated UART connector. Ensure all connections are secure before powering on the system.
Video: Demonstration of connecting the V19 4.3 inch Touch Screen Display to the BMS.

Image: JIKONG V19 PB Serial BMS connected to 4.3 Inch Touch Screen Display via UART Connector.
2.3. External Interfaces and Pin Definition
The display features a user interface port for power and serial communication, and a key extension interface for controlling BMS startup and shutdown.

Image: Back view of the 4.3-inch display showing User Interface and Switch Key Connectors.
User Interface (HY2.0mm-6P vertical stick)
Used for power supply and serial port signal connection.
Key Extension Interface (A1254WF-6A vertical sticker)
Used to control BMS startup and shutdown.
Pin Definition Table
| Number | Name | Definition |
|---|---|---|
| 1 | K- | Activation signal negative electrode |
| 2 | K+ | Activation signal positive electrode |
| 3 | GND | Negative terminal |
| 4 | TTL-RX | UART RX, 5V |
| 5 | TTL-TX | UART TX, 5V |
| 6 | VCC | Display power output |
3. Operation Instructions
3.1. APP Operation Instructions
To configure the display, open the JiKong BMS APP. Navigate to the "Parameter Setting" page and change the "Serial port 3 protocol" to "015-JK BMS PBxx SERIES LCD Protocol V1.0".
3.2. Display Interface Operation
The 4.3-inch touch screen display offers a clear interface for monitoring and setting parameters.

Image: Main display screen showing battery voltage, current, and capacity.
Battery Group Interface
This screen displays the current total voltage and current of the battery string, the number of online battery packs, the charging and discharging status of the entire battery string, and the highest and lowest cell temperatures.

Image: Battery Group Interface showing total voltage, current, cell voltage, temperature, and charge/discharge status.
Battery Pack Interface
In parallel mode, by selecting a specific battery pack, you can view its design capacity, remaining capacity, charge/discharge status, and individual cell voltages. Up to 16 battery packs can be displayed.

Image: Battery Pack Interface showing individual cell voltages and pack information.
Protocol Selection Interface
Through the protocol selection menu, you can choose the appropriate RS485 and CAN communication protocols for your system.

Image: Protocol Selection Interface showing RS485 and CAN protocol options.
4. Maintenance
- Keep the display clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the display to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all cable connections remain secure to prevent intermittent operation.
5. Troubleshooting
5.1. Common Issues
- Display not powering on: Check the power supply connection and ensure the BMS is powered. Verify the display cable is correctly inserted into both the display and the BMS.
- No data displayed: Confirm the UART connection is secure. Ensure the correct protocol is selected in the JiKong BMS APP (015-JK BMS PBxx SERIES LCD Protocol V1.0).
- Incorrect readings: Verify that the display is compatible with your specific JIKONG PB Serial BMS V19 version.
5.2. Compatibility Note
This display is designed for use exclusively with JIKONG PB Serial BMS V19. It may not be compatible with other BMS brands or models, such as Daly Blue BMS, due to differing communication protocols and hardware interfaces.
6. Specifications
6.1. Product Features
- Wide Power Supply Working Range: Default 9-36V
- Display Content: Battery total voltage, battery power, single series voltage display
- Communication: TTL level supported, baud rate default 115200bps
- Language Support: Chinese, English, Thai, Vietnamese switchover
- Customization: Support for display interface customization, including language, logo, and interface layout
6.2. General Parameters
| Parameter | Data |
|---|---|
| Display Category | TFT |
| Display Size | 4.3-inch |
| Size/Resolution | 480*272 |
| Backlight Type/Brightness | LED/300nit |
| Viewing Angle L/R/U/D | 85°/85°/85°/85° |
6.3. Power Supply
| Parameter | Min | Max |
|---|---|---|
| Supply Voltage (with power reverse protection) | 9V | 36V |
| Power Dissipation | 1.32W (12V@110mA) | |
6.4. Operating Environment and Reliability Parameters
| Parameter | Test Environment | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | At 12V voltage, humidity 60% | -20 | - | 70 | °C |
| Storage Temperature | - | -30 | - | 80 | °C |
| Operating Humidity | 25°C | 10% | 60% | 90% | RH |
6.5. Product Dimensions

Image: Detailed dimensions of the 4.3-inch display screen (Front, Side, Back views).

Image: Display cable diagram with 0.5 meter length. Standard cable length is 0.5 meters, and can be customized if necessary.
7. User Tips
- Always double-check the compatibility of the display with your specific BMS model (JIKONG PB Serial BMS V19) to avoid connection issues.
- When setting up, ensure the correct communication protocol is selected in the accompanying APP for proper data exchange.
- For optimal readability, keep the screen clean and avoid direct glare.
8. Warranty and Support
For warranty information and technical support, please refer to the official JIKONG documentation or contact JIKONG customer service. A user manual in PDF format is available for download: User manual (PDF).