Loefme Portable Mini Fully Automatic Bullet Shaped Ice Maker

Contents

LOEFME Portable Mini Automatic Ice Maker User Manual

Model: Portable Mini Fully Automatic Bullet Shaped Ice Maker

1. Product Overview

The LOEFME Portable Mini Automatic Ice Maker is designed to provide convenient and efficient ice production for various settings, including home, office, parties, bars, and camping. It features a compact design, rapid ice making capabilities, and intelligent controls.

LOEFME Portable Mini Automatic Ice Maker highlighting features like 9 ice cubes in 6-8 minutes, 12kg/24h production, 1.2L water tank, low noise, two ice sizes, and portability.
Figure 1: LOEFME Portable Mini Automatic Ice Maker highlighting features like 9 ice cubes in 6-8 minutes, 12kg/24h production, 1.2L water tank, low noise, two ice sizes, and portability.

Key Features:

  • Efficient Ice Production: Produces up to 12kg of ice per day, with the first batch ready in 6-8 minutes.
  • Two Ice Cube Sizes: Offers small (S: 20x25mm) and large (L: 25x30mm) bullet-shaped ice cubes.
  • Intelligent Control Panel: Features a multi-function touch panel with indicators for water shortage and full ice basket.
  • Automatic Self-Cleaning: Initiates a 30-minute deep cleaning cycle with a simple button press.
  • Portable Design: Equipped with a built-in handle for easy transport, suitable for various environments.
  • Durable Construction: Made from food-grade stainless steel with a thickened foam layer for insulation and durability.
  • Low Noise Operation: Operates at less than 35dB.

2. Package Contents

Please check the package contents upon unboxing to ensure all items are present and undamaged.

  • 1 x Ice Maker Unit
  • 1 x Power Cord
  • 1 x Instruction Manual (this document)
  • 1 x Ice Scoop
  • 1 x Handle
  • 1 x Ice Basket
Ice Maker Unit
Figure 2: Ice Maker Unit.
Power Cord
Figure 3: Power Cord.
Ice Scoop
Figure 4: Ice Scoop.
Handle and Ice Basket
Figure 5: Handle and Ice Basket.

3. Setup and Installation

  1. Unpacking: Carefully remove the ice maker and all accessories from the packaging. Retain packaging for future transport or storage.
  2. Placement: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
  3. Initial Cleaning: Before first use, clean the interior of the ice maker. Refer to the "Maintenance and Cleaning" section for detailed instructions.
  4. Power Connection: Connect the power cord to a grounded electrical outlet. Ensure the voltage matches the specifications of the ice maker. (Note: Check your local power plug type and voltage compatibility.)
  5. Handle Installation (Optional): If the handle is not pre-installed, attach it according to the diagram provided in the package. The handle is designed for easy portability.
    Ice maker with portable handle
    Figure 6: Ice maker with its portable handle for easy movement.

4. Operating Instructions

4.1 Control Panel Overview

Intelligent control panel with buttons for Add Water, Ice Full, Power, On/Off, Select, S, L
Figure 7: Intelligent Control Panel.
  • ADD WATER Indicator: Lights up when the water tank needs refilling.
  • ICE FULL Indicator: Lights up when the ice basket is full.
  • POWER Indicator: Indicates the unit is powered on.
  • ON/OFF Button: Powers the unit on or off. Press and hold for 5 seconds to activate self-cleaning.
  • SELECT Button: Toggles between small (S) and large (L) ice cube sizes.
  • S Indicator: Lights up when small ice cube size is selected.
  • L Indicator: Lights up when large ice cube size is selected.

4.2 Making Ice

  1. Add Water: Open the lid and fill the water tank with clean, potable water up to the MAX fill line. Do not overfill. The water tank has a capacity of 1.2L.
    Hand adding water to the ice maker
    Figure 8: Adding water to the ice maker's reservoir.
  2. Power On: Press the "ON/OFF" button to turn on the ice maker. The POWER indicator will light up.
  3. Select Ice Size: Press the "SELECT" button to choose your desired ice cube size (S for small, L for large). The corresponding indicator (S or L) will light up.
  4. Ice Production: The ice maker will begin the ice-making cycle. The first batch of 9 bullet-shaped ice cubes will be ready in approximately 6-8 minutes.
  5. Ice Full/Water Shortage: The "ICE FULL" indicator will light up when the ice basket is full, and the unit will pause operation. The "ADD WATER" indicator will light up when the water level is low, and the unit will pause. Refill water or empty the ice basket to resume operation.
  6. Collecting Ice: Use the provided ice scoop to remove ice from the ice basket.

5. Maintenance and Cleaning

5.1 Automatic Self-Cleaning

The ice maker features an automatic self-cleaning function to ensure hygiene and prolong the unit's lifespan.

  1. Ensure there is water in the tank.
  2. Press and hold the "ON/OFF" button for 5 seconds.
  3. The unit will enter a 30-minute deep self-cleaning cycle. The "ADD WATER" and "ICE FULL" indicators may flash to show the process.
  4. Once the cycle is complete, drain the water from the unit using the drain plug located at the bottom.
    Automatic self-cleaning process with 1 press and 30 minutes duration
    Figure 9: Initiating the automatic self-cleaning function.

5.2 Manual Cleaning

  • Exterior: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Interior: For thorough cleaning, unplug the unit, remove the ice basket, and drain any remaining water. Clean the interior surfaces with a mild detergent and warm water. Rinse thoroughly and dry completely before reassembling.
  • Drain Plug: Periodically check and clean the drain plug to prevent blockages.

Caution: Always unplug the ice maker before cleaning to prevent electric shock.

6. Troubleshooting

ProblemPossible CauseSolution
Ice maker not turning on.No power supply.Check if the power cord is securely plugged into a working outlet. Ensure the ON/OFF button is pressed.
"ADD WATER" indicator is on.Water tank is empty or water level is too low.Refill the water tank with clean water up to the MAX line.
"ICE FULL" indicator is on.Ice basket is full.Remove ice from the ice basket.
Ice production is slow or ice cubes are small/misshapen.Ambient temperature too high; water temperature too high; insufficient water; dirty unit.Ensure the unit is in a cool environment. Use cold water. Check water level. Perform a self-cleaning cycle.
Unusual noise during operation.Unit not level; internal components vibrating.Ensure the ice maker is on a stable, level surface. If noise persists, contact customer support.

7. Specifications

FeatureDetail
BrandLoefme
ModelPortable Mini Fully Automatic Bullet Shaped Ice Maker
Ice Production Capacity12 kg / 24 hours
Ice Storage Capacity0.6 kg
Ice Dispense Time6-8 minutes per 9 pieces
Bullet Ice Cube SizesSmall (S): 20 x 25 mm, Large (L): 25 x 30 mm
Water Storage Capacity1.2 L
MaterialStainless Steel
ColorSilver
Noise Level<35 dB
Net WeightApprox. 6 kg
CertificationsCE, RoHS, WEEE
Diagram showing the internal layers of the ice maker: Premium Stainless Steel, Thickened foam layer, Premium Stainless Steel
Figure 10: Internal construction highlighting stainless steel and insulation.

8. User Tips

  • For optimal performance, use filtered or distilled water to prevent mineral buildup and ensure clearer ice.
  • Regularly perform the self-cleaning cycle, especially if you notice a change in ice quality or taste.
  • When moving the unit, always use the built-in handle and ensure the water tank is empty to prevent spills.
  • If the ice maker is not used for an extended period, drain all water and clean the unit thoroughly before storing.
  • Ensure the ice maker is placed in a well-ventilated area to prevent overheating and maintain efficient ice production.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official Loefme website. Keep your purchase receipt as proof of purchase for warranty claims.

This product is certified with CE, RoHS, and WEEE standards, ensuring compliance with European safety, health, and environmental protection requirements.

© 2024 Loefme. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.