Estardyn NV3007

Contents

Estardyn 1.68-inch TFT LCD Module User Manual

Model: NV3007

1. Product Overview

The Estardyn 1.68-inch TFT LCD module is a compact, full-view angle color display featuring a 142x428 resolution and an NV3007 driver IC. It utilizes a 4-wire SPI interface for communication, making it suitable for various embedded applications requiring a small, high-density display.

Front and back view of the 1.68-inch TFT LCD module
Figure 1: Front and back view of the Estardyn 1.68-inch TFT LCD module, showing the display and PCB with pin labels.

2. Specifications

Feature Description
Display Size 1.68 inch
Resolution 142 x 428 pixels
Driver IC NV3007
Interface Type 4-wire SPI
Display Mode TFT, Full View Angle
Display Color Colorful
Power Supply 2.8V - 3.3V
Linking Method COG (Chip-on-Glass)
Operating Temperature -20°C to 70°C
Screen Size (mm) 16.3 x 44.96 x 2.23
Module Size (mm) 24.77 x 48.51 x 3.56
Display Area (mm) 13.16 x 39.68
Detailed product parameters and pin definition table for the LCD module
Figure 2: Product parameters and pin definition.
Technical drawing with dimensions and pin layout for the 1.68-inch TFT LCD module
Figure 3: Module dimensions and layout drawing.

3. Setup and Connection

This module communicates via a 4-wire SPI interface. Proper connection to your microcontroller or development board is essential for correct operation. Refer to the pin definition table below and the provided diagrams for wiring instructions.

3.1 Pin Definition

PIN SYMBOL Description
1 GND Ground
2 VCC Power Supply (2.8V-3.3V)
3 SCL SPI Clock Line
4 SDA SPI Data Line
5 RES Reset Pin
6 DC Data/Command Selection Pin
7 CS Chip Select Pin
8 BL Backlight Control Pin

3.2 Initial Power-Up

Before applying power, double-check all connections to ensure they match the pin definitions. Incorrect wiring can damage the module. Ensure your power supply is within the specified 2.8V-3.3V range.

4. Operating Instructions

To operate the LCD module, you will need to write firmware for your microcontroller to communicate with the NV3007 driver IC via the SPI interface. This involves sending initialization commands, setting display parameters, and then sending pixel data.

4.1 Displaying Content

The display supports full-color output. You can send individual pixel data or larger blocks of image data to render graphics, text, or animations. The high DPI (dots per inch) of this display allows for crisp and clear visuals.

LCD module displaying various colored text strings on a test setup
Figure 4: LCD displaying test patterns and text.
Close-up of the LCD module displaying '565 RGB BAR' with color gradients
Figure 5: Close-up of RGB color bar display, showing pixel detail.

5. Maintenance

To ensure the longevity and optimal performance of your LCD module, follow these maintenance guidelines:

  • Handling: The module is a delicate electronic component. Avoid dropping it or subjecting it to strong impacts. Handle by the edges of the PCB to prevent damage to the display area or flex cable.
  • Cleaning: Use a soft, lint-free cloth, slightly dampened with distilled water or an electronics-safe cleaning solution, to gently wipe the display surface. Avoid abrasive materials or harsh chemicals.
  • Storage: Store the module in a dry, anti-static environment, away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • No Display/Blank Screen:
    • Verify all power and signal connections are secure and correct according to the pin definition.
    • Ensure the power supply voltage is within the 2.8V-3.3V range.
    • Check your initialization code. The NV3007 driver IC may require specific initialization sequences.
    • Confirm that the backlight (BL pin) is correctly powered or enabled.
  • Incorrect Colors/Garbled Display:
    • Review your SPI communication protocol and timing.
    • Ensure the data format (e.g., RGB565) matches what the driver IC expects and how you are sending pixel data.
    • Check for any loose connections or interference on the data lines.
  • Partial Display:
    • Verify the resolution settings in your initialization code match the module's 142x428 resolution.
    • Ensure your frame buffer or image data is correctly sized and being sent completely.

7. User Tips

  • Initialization Code: For developers, the NV3007 controller has some unique initialization code. It has been noted that initialization code from buydisplay.com for similar NV3007-based LCDs may be a useful reference.
  • Handling: The module typically does not come with a protective case. Exercise caution during handling and integration to prevent physical damage.
  • Testing: When testing, displaying simple color bars or text patterns (like 'TESTING RED', 'TESTING YELLOW') can help verify basic functionality and color accuracy.

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support, programming examples, or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase details and product model number (NV3007) ready when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.