1. Introduction
The PR903W is an advanced WiFi-enabled hunting camera designed for capturing high-quality images and videos of wildlife. Featuring an integrated solar panel for extended battery life, 8K video resolution, 60MP photo capability, and crystal-clear night vision, this camera is built to perform in various outdoor conditions. Its robust IP66 waterproof rating ensures durability against dust, rain, ice, and snow.
2. Safety Information
- Do not expose the camera to extreme temperatures outside its operating range (-20°C to +60°C).
- Ensure the battery compartment is securely closed to maintain the IP66 waterproof rating.
- Use only recommended 1.5V AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
- Keep the camera away from strong magnetic fields.
- Handle the lens and solar panel with care to avoid scratches or damage.
3. Product Overview
Familiarize yourself with the camera's components:

- Solar Panel: Integrated for continuous power supply.
- Lens: Captures images and videos.
- PIR Sensor: Passive Infrared sensor for motion detection.
- 2.0" Display Screen: For menu navigation and viewing media.
- Control Buttons: MENU, UP, DOWN, MODE, SHOT, OK.
- Power Switch: OFF-TEST-ON.
- USB Port: For connecting to a computer.
- TF Card Slot: For memory card insertion.
- Battery Box: Houses 8 AA batteries.
- Lock Holes: For securing the camera.
4. Setup
4.1 Battery Installation
- Open the camera's casing to access the battery compartment.
- Insert 8 new 1.5V AA alkaline batteries into the battery box, ensuring correct polarity (+/-).
- Close the battery compartment securely.
4.2 SD Card Installation
- Locate the TF (SD) card slot inside the camera.
- Insert a compatible SD card (4GB to 128GB) into the slot until it clicks into place.
- It is recommended to format the SD card through the camera's menu before first use.
4.3 Mounting the Camera
The camera can be mounted to a tree or other stable surface using the provided strap or mounting accessories. Ensure the camera is positioned to capture the desired area, with a clear line of sight for the PIR sensor and lens.

5. Operating Instructions
5.1 Powering On/Off and Test Mode
- Slide the power switch to the 'TEST' position to enter setup mode. The display screen will activate.
- After configuring settings, slide the switch to 'ON' for normal operation. The screen will turn off after 3 seconds for calibration, and the camera will begin recording based on its settings.
- To turn off the camera, slide the switch to 'OFF'.
5.2 Menu Navigation
In 'TEST' mode, use the control buttons:
- MENU: Access the main settings menu.
- UP/DOWN Arrows: Navigate through menu options.
- MODE: Switch between Photo, Video, and Photo+Video modes.
- OK: Confirm selections.
- SHOT: Manually take a photo or start/stop video recording.
5.3 WiFi Connection & App Control
The PR903W supports WiFi connectivity for remote control and media management via a dedicated app (available for iOS/Android).
- Ensure the camera is in 'TEST' mode or has its WiFi enabled via the menu.
- Download and install the official app on your smartphone.
- Follow the app's instructions to connect to the camera's WiFi network.
- Once connected, you can view live footage, download pictures and videos, and adjust camera settings directly from your phone.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera body. For the lens and solar panel, use a lens cleaning cloth and solution to avoid scratches.
- Battery Care: Replace all 8 AA batteries simultaneously. If the camera will not be used for an extended period, remove the batteries to prevent leakage.
- Storage: Store the camera in a cool, dry place when not in use.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance.
7. Troubleshooting
- Camera not powering on: Check battery installation and ensure batteries are charged. Verify the power switch is in the 'TEST' or 'ON' position.
- Poor image/video quality: Ensure the lens is clean. Check the resolution settings in the camera menu.
- PIR sensor not triggering: Verify PIR sensitivity settings. Ensure there are no obstructions in front of the sensor.
- WiFi connection issues: Make sure the camera's WiFi is enabled. Restart both the camera and your smartphone. Ensure you are within range of the camera's WiFi signal.
- SD card errors: Format the SD card in the camera. Try a different SD card if the issue persists.
8. Specifications
| Feature | Specification |
|---|---|
| Photo Resolution | 60/48/42/36/32/28/24/20/14/9MP |
| Video Resolution | 8K/4K/2.7K/1080P/720P |
| Triggering Time | 0.2 ~ 0.5 seconds |
| Infrared Distance | 15-20 meters |
| Induction Distance | 15 meters |
| Lens Angle | 120 degrees |
| Waterproof Rating | IP66 |
| Infrared Lights | 2 |
| Power Supply | 8 AA batteries (not included), Integrated Solar Panel with 5200mAh battery |
| Memory Support | Max 128GB SD card |
| Certifications | CE, FCC, ROHS |
| Working Mode | Photo/Video (with audio) |
| Working Temperature | -20°C to +60°C |
| Connectivity | WiFi |
| Technology | INFRARed |


9. User Tips
- Always format your SD card directly in the camera before its first use and periodically to ensure optimal performance and prevent data corruption.
- For consistent power, use a full set of 8 new 1.5V AA alkaline batteries and replace them all at the same time.
- When switching the camera to 'ON' mode, allow approximately 3 seconds for the camera to calibrate before it begins active monitoring.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product's official support channels. Keep your purchase receipt as proof of purchase.