ENJOYWOOD Bench Top Router Table Workbench

Contents

ENJOYWOOD Bench Top Router Table Workbench

Instruction Manual

1. Introduction

Thank you for choosing the ENJOYWOOD Bench Top Router Table Workbench. This versatile tool is designed to enhance your woodworking projects by providing a stable and precise platform for your router. Featuring a profile fence system, miter gauge, and efficient dust collection, this workbench is suitable for a wide range of routing tasks. Please read this manual thoroughly before assembly and operation to ensure safe and optimal use of your new router table.

2. Safety Information

Always prioritize safety when operating power tools. Failure to follow safety guidelines can result in serious injury or damage to the equipment.

  • Read and understand all instructions in this manual and your router's manual before use.
  • Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask.
  • Ensure the workbench is placed on a stable, level surface and is securely fastened if necessary.
  • Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate the router table in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating the tool.
  • Always disconnect power to the router before making adjustments, changing bits, or performing maintenance.
  • Use the dust collection port to minimize airborne dust and maintain a clear view of your workpiece.
  • Never reach into the router bit area while the router is running or connected to power.
  • Use push sticks or push blocks when feeding small workpieces to keep hands away from the router bit.

3. Package Contents

Carefully unpack all components and check them against the list below. If any parts are missing or damaged, please contact customer support before proceeding with assembly.

Detailed list of package contents for the router table workbench

Figure 1: Detailed view of package contents and hardware.

  • 1 x Reducer
  • 1 x Workbench support body with scale backing
  • 1 x Flip chip panel
  • 2 x Wooden board
  • 1 x Eye guard
  • 1 x Backstop
  • 2 x Workbench support feet
  • 1 x Small push handle backer
  • 1 x Small push handle assembly
  • 3 x Backer body No. 1 Support
  • 3 x Handle
  • 12 x Support m6x12 Screw No. 1
  • 1 x Black plastic handle
  • 1 x Cross head driver
  • 4 x Anchor screw No. 4 T-screw m6x20
  • 6 x Bracket No. 2 screw m6x8
  • 2 x Bracket baffle
  • 2 x 2.5mm hex key
  • 1 x 4mm hex wrench
  • 1 x 10mm open end wrench
  • 1 x 3mm open end wrench
Close-up of various screws and washers included in the package

Figure 2: Assortment of screws and washers.

4. Specifications

AttributeValue
BrandENJOYWOOD
Model NumberBench Top Router Table Workbench
MaterialAluminum alloy
ColorRed
TypeCombination Wood Working Tool
Router Mounting DistanceMini 58mm, Max 130mm
Net Product Weight6.615 kg
Gross Product Weight7.65 kg
Inner Box Size48.5 x 45.5 x 16 cm
Optional Unit TypeMetric/Imperial

Dimensions

Dimensional drawing of the router table workbench with all key measurements

Figure 3: Router Table Workbench Dimensions.

  • Overall Length: 450mm / 17.7in
  • Overall Width: 262mm / 10.3in
  • Overall Height: 400mm / 15.74in
  • Tabletop Length: 420mm / 16.53in
  • Tabletop Width: 350mm / 13.77in
  • Fence Height: 75mm / 2.95in
  • Dust Port Outer Diameter: 63.5mm / 2.5in
  • Dust Port Inner Diameter: 38.5mm / 1.5in
  • Fence Assembly Height from Tabletop: 50mm / 1.98in

5. Setup and Assembly

Follow these steps to assemble your ENJOYWOOD Bench Top Router Table Workbench. Refer to the package contents list and diagrams for component identification.

Main components of the router table workbench laid out for assembly

Figure 4: Main components before assembly.

  1. Inspect Components: Before starting, lay out all parts and verify against the 'Package Contents' list. Ensure all screws, nuts, and accessories are present.
  2. Assemble Workbench Support Feet: Attach the two workbench support feet to the main workbench body using the appropriate screws (e.g., Anchor screw No. 4 T-screw m6x20) and hex keys. Ensure they are securely fastened to provide a stable base.
  3. Install Backer Body Supports: Secure the three Backer body No. 1 Supports to the main frame.
  4. Attach Workbench Support Body with Scale Backing: Mount the workbench support body, which includes the scale backing, to the main frame.
  5. Mount Flip Chip Panel: Install the flip chip panel onto the workbench surface.
  6. Assemble Profile Fence System: Attach the profile fence components, including the two wooden boards, eye guard, and backstop, to the workbench support body. Use the provided handles and screws to secure them.
  7. Install Small Push Handle Assembly: Attach the small push handle backer and the small push handle assembly to the designated location on the fence system.
  8. Attach Reducer and Dust Collection Port: Secure the reducer and black plastic handle (dust collection port) to the fence system. Ensure a tight fit for efficient dust extraction.
  9. Final Checks: Double-check all screws and connections to ensure they are tight and secure. The workbench should be stable and all movable parts should operate smoothly.

Note: The router itself is not included with this workbench. Ensure your router's mounting base fits within the specified Router Mounting Distance (Mini 58mm, Max 130mm) before attempting to install it.

6. Operating Instructions

Once assembled, your router table is ready for use. Always follow safety precautions.

6.1. Router Installation

  1. Ensure your router is unplugged.
  2. Align your router's base plate with the mounting holes on the underside of the workbench panel.
  3. Secure the router using appropriate screws and hardware (not included with the workbench, typically supplied with your router).
  4. Adjust the router bit height as needed for your project.

6.2. Fence System Adjustment

The profile fence system allows for precise control over your cuts.

  • Loosen the handles on the fence to slide it forward or backward to set the desired cutting depth.
  • Use the scale backing for accurate measurements.
  • Tighten the handles securely once the fence is in position.
  • The wooden boards on the fence can be adjusted or replaced to accommodate different bit sizes and provide zero-clearance support.

6.3. Miter Gauge Usage

The miter gauge (if included in your specific configuration) can be inserted into the T-slot on the workbench to guide workpieces at specific angles for cross-cutting or end-grain routing.

6.4. Dust Collection

Connect a shop vacuum or dust collector to the dust collection port on the fence system. This will help keep your workspace clean and improve visibility during operation.

6.5. Routing Operation

  • Always perform a test cut on scrap material to verify settings.
  • Feed the workpiece smoothly and consistently against the fence and tabletop.
  • Use push sticks or featherboards for added safety and control, especially with smaller pieces.

7. Maintenance

Regular maintenance will prolong the life of your router table workbench and ensure continued precision.

  • Cleaning: After each use, clean the workbench surface and fence system to remove sawdust and debris. A damp cloth can be used for the aluminum surfaces, but ensure all parts are dry before storage.
  • Lubrication: Periodically apply a dry lubricant to the fence adjustment mechanisms and T-slots to ensure smooth movement.
  • Hardware Check: Regularly inspect all screws, bolts, and fasteners for tightness. Tighten any loose hardware to maintain stability and accuracy.
  • Storage: Store the router table in a dry environment to prevent rust or corrosion, especially on metal components.

8. Troubleshooting

This section addresses common issues you might encounter.

  • Wobbly Table: Ensure all workbench support feet and frame connections are securely tightened. Check that the table is on a flat, stable surface.
  • Fence Not Moving Smoothly: Clean the fence tracks and apply a dry lubricant. Check for any debris obstructing movement.
  • Inaccurate Cuts: Verify that the fence is parallel to the miter slot (if applicable) and that all measurements are taken accurately. Ensure the router bit is properly installed and sharp.
  • Poor Dust Collection: Check that the dust collection port is securely connected to your vacuum system and that there are no blockages in the hose or port.

9. User Tips

  • Check All Parts: Before starting assembly, carefully check the package contents against the provided list. One user reported a missing M6 nut, which halted their assembly. A thorough check can prevent delays.
  • Router Compatibility: While designed for most routers, always verify your router's base plate dimensions against the specified mounting distance (Mini 58mm, Max 130mm) to ensure a proper fit.
  • Quality for Price: Users have noted the product offers amazing quality for its price point, making it a valuable addition to a workshop.
  • Customer Service: Some users have praised the seller's friendly attitude and communication, suggesting that reaching out for support with any issues can be a positive experience.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the ENJOYWOOD Global Store directly through your purchase platform. Keep your purchase receipt as proof of purchase.

© 2023 ENJOYWOOD. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.