1. Introduction
The Lingbao M9 Pro is a high-performance gaming mouse designed for precision, speed, and comfort. Featuring tri-mode connectivity (2.4G wireless, Bluetooth, and wired), an 8K return rate, and a lightweight ergonomic design, it offers a superior gaming and computing experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Lingbao M9 Pro mouse.
2. Setup
2.1 Package Contents
- Lingbao M9 Pro Wireless Mouse
- Wireless Receiver (1K or 8K NANO, depending on model)
- Data/Charging Cable
- Receiver Extender
- Anti-slip Stickers
2.2 Charging the Mouse
The Lingbao M9 Pro mouse is equipped with a 400mAh rechargeable battery. Connect the mouse to your computer using the provided data/charging cable to charge. The mouse can still be used while charging.
Figure 1: M9 Pro mouse showing the removable 400mAh battery compartment.
2.3 Connection Modes
The mouse supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.
- 2.4G Wireless Connection:
a. Locate the toggle switch on the bottom of the mouse.
b. Set the switch to '2.4G'.
c. Insert the wireless receiver into a USB port on your computer.
d. The mouse should connect automatically. - Bluetooth Connection:
a. Set the toggle switch on the bottom of the mouse to 'BT'.
b. On your computer, go to Bluetooth settings and search for new devices.
c. Select 'Lingbao M9 Pro' (or similar) from the list to pair.
d. Follow any on-screen prompts to complete the pairing process. - Wired Connection:
a. Set the toggle switch on the bottom of the mouse to 'OFF'.
b. Connect the mouse to your computer using the provided data/charging cable.
c. The mouse will function as a wired mouse and charge simultaneously.
Figure 2: Bottom view of the M9/M9 Pro mouse showing the mode toggle switch and indicator light.
2.4 Wireless Receiver Switching (M9/M9 Pro only)
For M9 and M9 Pro models, the wireless receiver can switch between 1K and 8K return rates:
- Set the mouse toggle switch to 'OFF'.
- While holding down the wheel key (front side key), toggle the switch to '2.4G'.
- The indicator light will show green for 8K return rate and red for 1K return rate.
- Connect the corresponding receiver (standard 1K receiver for 1K, 8K NANO receiver for 8K).
3. Operating the Mouse
3.1 DPI Adjustment
The Lingbao M9 Pro features a Pixart 3395 sensor with up to 26000 DPI and six-speed adjustable settings. Use the DPI adjust button (usually located on the top or bottom of the mouse) to cycle through different DPI levels to match your preference and task requirements.
3.2 Polling Rate
The mouse supports a double 8K (8000Hz) return rate in both wired and wireless modes for M9 Pro Max and above models (with 8K NANO receiver). M9 and M9 Pro models support 1K (1000Hz) with their standard receiver, and can be manually switched to 8K with an 8K NANO receiver.
Figure 3: Illustration of 8K return rate for smooth tracking.
3.3 Button Functions
- Left/Right Click: Equipped with TTC light micro-motion switches, offering a quick trigger speed and lower rebound delay, rated for 0.1 billion clicks.
- Scroll Wheel: Features a TTC Golden Wheel encoder for precise scrolling.
- Side Keys: Customizable side keys (TTC Side Key) for additional functions.
Figure 4: Internal view of TTC light micro-motion, side key, and encoder.
3.4 Ergonomics
The Lingbao M9 Pro is designed for comfortable hands-on experience and lightweight control, featuring:
- Finger comfort groove
- Side holding groove
- 3D anti-skid roller
- Comfortable palm support
- Elevated position of side key
- Round Tail
Figure 5: Ergonomic design features of the Lingbao M9 Pro mouse.
4. Maintenance
4.1 Cleaning
The mouse features a Nano ice sensing coating which is anti-pollution and easy to clean. Use a soft, dry cloth to wipe the surface of the mouse. Avoid using harsh chemicals or abrasive materials that could damage the coating.
Figure 6: Nano ice sensing coating for easy maintenance.
4.2 Foot Pads
The mouse is equipped with Bulk PTFE Foot Pads for silky, unimpeded stable output. Ensure these pads are kept clean and free from debris to maintain optimal glide performance. If the pads show significant wear, they may need replacement for best performance.
Figure 7: Bulk PTFE Foot Pads for smooth movement.
5. Troubleshooting
5.1 Connection Issues
- Wireless (2.4G/Bluetooth): Ensure the mouse is charged and the toggle switch is in the correct position. For 2.4G, verify the receiver is properly inserted. For Bluetooth, ensure your device's Bluetooth is enabled and the mouse is paired.
- Wired: Check the cable connection to both the mouse and the computer.
5.2 Performance Issues (8K Polling Rate)
If you experience stuttering or performance issues when using the 8K polling rate, your computer's configuration might not meet the requirements. Consider lowering the polling rate to 1K for a smoother experience. The following are recommended configurations for optimal 8K polling rate performance:
Figure 8: Recommended PC configurations for 8K polling rate.
| Component | Intel Platform | AMD Platform |
|---|---|---|
| CPU | i7-9700K and above | Ruilong 3700X and above |
| Graphics | NVIDIA RTX2060 and above | AMD RX5700XT and above |
| Memory | 16GB and above | 16GB and above |
| Display | Screen refresh rate above 240Hz | |
6. Specifications
Figure 9: Comparison of Lingbao M9 series mouse models.
| Feature | M9 | M9 Pro | M9 Max | M9 Ultra |
|---|---|---|---|---|
| Appearance | Standard | Standard | Standard | Please look into the appearance |
| Receiver | Standard original phase 1K receiver | 8K NANO Receiver | ||
| Rate of Return | Support wired 8K/wireless 8K | Wired 8K / Wireless 8K | Wired 8K / Wireless 8K | |
| Coating | A full range of nano ice coating | |||
| Left and Right Fretting | 0.1 billion times TTC light micro motion | |||
| Encoder | TTC Gold Wheel | |||
| DPI | 400-26000 Six-speed adjustable | 800-30000 | ||
| Chip | Original phase PixArt 2862 | PAW 3395 | Realtek RT_L 8762 | |
| Sensor | PAW 3395 | PAW 3950 | ||
| Battery | 400mAh not removable | 400mAh Removable battery | Spoon 12.8g | |
| Lightweight | Approximately 44g | Approximately 44g Lightweight | Mouse weight is 12.8g metal weight without battery/receiver, etc. Product color is not Division weight or difference | |
| Dimensions | ≈ 124.69 x 62.71 x 39.1 mm | |||
| Connection Mode | Three-mode connection: 2.4G/wired/Bluetooth | |||
Additional Specifications:
- Brand Name: BITCED
- Origin: Mainland China
- Certification: CE
- Number of Rollers: 1 pcs
- Hand Orientation: Right
- Power Type: Rechargeable
- Sensor Model: Pixart 3395 (26000 DPI | 650 IPS | 50G)
- Style: DPI adjust button
- Type: 2.4Ghz Wireless
7. User Tips
- Experiment with different DPI settings to find what works best for your specific tasks, whether it's precise aiming in games or general desktop navigation.
- For competitive gaming, utilize the 8K polling rate if your system meets the recommended specifications to minimize input lag and achieve smoother tracking.
- Regularly clean the mouse surface and PTFE foot pads to maintain optimal glide and responsiveness.
- Keep the mouse charged to ensure uninterrupted wireless performance. The removable battery on M9 Pro/Max models offers flexibility for extended use.
- Take advantage of the tri-mode connectivity to seamlessly switch between devices or connection types as needed.
8. Warranty and Support
For any questions, technical support, or warranty claims regarding your Lingbao M9 Pro Wireless Mouse, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.
