Kemai MD1702BT Portable Retro Radio and Bluetooth Speaker

1. Introduction

The Kemai MD1702BT is a versatile portable audio device that combines the nostalgic charm of a retro radio with modern connectivity features. It offers FM, AM, and SW radio bands, Bluetooth wireless streaming, and playback from USB drives, TF cards, and SD cards. Its wooden grain finish and classic design make it a stylish addition to any home, while its portability allows for enjoyment anywhere.

This manual provides detailed instructions on how to set up, operate, and maintain your MD1702BT speaker to ensure optimal performance and longevity.

2. Package Contents

• Kemai MD1702BT Portable Radio & Bluetooth Speaker × 1
• AC Power Cable × 1
• User Manual × 1

3. Product Overview: Controls and Interfaces

Familiarize yourself with the various controls and ports on your Kemai MD1702BT speaker.

Figure 3.1: Front Panel Controls

1. Play/Pause Button
2. Previous Song Button
3. Next Song Button
4. Loop Playback Button
5. Mode Conversion Button (Switch between Bluetooth, AUX, Radio, USB/Card)
6. Power Switch / Colorful Light Switch
7. Function Selection Switch (MP3, FM, AM, SW)
8. Volume Knob (Min/Max)
9. Tuning Knob
10. Horn (Speaker)
11. AUX Audio Input
12. U Disk (USB) Interface
13. SD Card Interface
14. TF Card Interface
15. DC 6V Interface
16. Battery Compartment
17. Radio Antenna
18. AC Charging Port
19. Colorful Lights
20. Charging Indicator

Figure 3.2: Rear Panel Interfaces

Figure 3.3: Side Panel Interfaces

4. Setup

4.1 Power Supply Options

The Kemai MD1702BT offers multiple power options for your convenience:

• AC Power: Directly plug into a 220V AC power outlet using the provided AC power cable.
• DC 6V: Connect to a DC 6V power source via the DC 6V interface.
• Built-in Rechargeable Battery: The unit includes a built-in rechargeable battery for portable use.
• Dry Batteries: For extended portable use, you can also insert 4 No. 1 (D-cell) dry batteries into the battery compartment.

Figure 4.1: Power Supply Options

4.2 Antenna

For optimal radio reception, extend the telescopic radio antenna (17) fully. Adjust its direction for the best signal clarity.

Figure 4.2: Extended Antenna

5. Operating Instructions

5.1 Power On/Off

Long press the Power Switch (6) for 3 seconds to turn the speaker on or off.

5.2 Bluetooth Connection

1. Long press the Power Switch (6) to turn on the speaker.
2. The LED indicator (20) will flash blue, indicating it is in pairing mode.
3. On your mobile device, open Bluetooth settings, search for available devices, and select the speaker (usually named 'MD1702BT' or similar).
4. Once connected, the LED indicator will show a solid blue light, and you can play music wirelessly.

Figure 5.1: Bluetooth Connection

5.3 AUX Mode

1. Connect a 3.5mm audio cable (not included) from your external audio device to the AUX Audio Input (11) on the speaker.
2. The speaker will automatically switch to AUX mode.

5.4 Radio Operation (FM/AM/SW)

1. Extend the Radio Antenna (17) for better reception.
2. Use the Function Selection Switch (7) to choose your desired band: FM, AM, or SW.
3. Rotate the Tuning Knob (9) to scan for radio stations. The pointer-type frequency indicator window will show the current frequency.
4. Adjust the Volume Knob (8) to your preferred listening level.

Figure 5.2: Frequency Display

5.5 USB/TF/SD Card Playback

The speaker supports playback from USB flash drives, TF cards, and SD cards.

1. Insert your USB drive into the U Disk Interface (12) or your TF/SD card into the respective slots (13, 14).
2. The speaker will automatically detect the media and begin playback.
3. Use the Play/Pause (1), Previous Song (2), and Next Song (3) buttons to control playback.
4. The Loop Playback Button (4) allows you to repeat tracks.

Figure 5.3: Multi-Player Mode Interfaces

5.6 Colorful Lights

The speaker features colorful lights (19). Toggle the Power Switch (6) to activate or deactivate these lights.

6. Charging

To charge the built-in rechargeable battery:

1. Connect the AC power cable to the AC Charging Port (18) on the speaker and plug it into a 220V AC outlet.
2. The Charging Indicator (20) will show a red light, indicating that the unit is charging.
3. Once fully charged, the red light will turn off.

A full charge typically takes 2-3 hours. The playing time on a full charge is approximately 4-10 hours, depending on volume and usage.

7. Specifications

Figure 7.1: Product Dimensions

8. Safety Warnings

WARNING: Risk of fire, explosion, and burns. Small parts are included. Keep away from children under 3 years old to prevent choking risk.

• Do not disassemble, puncture, or throw the battery into fire.
• Do not use the speaker in high temperature, humid, or dusty environments.
• Do not play at maximum volume for a long time to avoid hearing damage.
• Keep the speaker away from children under 3 years old to prevent choking hazards.
• Stop using immediately if there is overheating, smoke, or abnormal smell.

9. Troubleshooting

10. Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the device away from water, moisture, and direct sunlight.
• Store in a cool, dry place when not in use for extended periods.
• If using dry batteries, remove them if the device will not be used for a long time to prevent leakage.

11. Warranty & Support

This product comes with a 3-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance or support, please refer to the official product page or contact the seller.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)