1. Introduction
This product is an industrial platinum resistance temperature detector designed for accurate and stable temperature measurement in machinery and process control systems. The sensor utilizes a thin-film Pt100 resistance element to provide reliable temperature monitoring in industrial environments such as packaging equipment, food processing machinery, injection molding machines, dispensing systems, and temperature controllers.
The probe is constructed with a stainless steel sheath and shielded cable to ensure mechanical strength, resistance to oil and moisture, and stable signal transmission.

2. Specifications
The PT100 Temperature Sensor offers robust performance for various industrial applications. Key specifications are detailed below:
| Attribute | Detail |
|---|---|
| Product Name | Pt100 Temperature Sensor |
| Model | Pt100 (default) / K / E / J / T / Pt1000, etc. |
| Probe Material | 304 Stainless Steel (default) / 316 or custom |
| Measuring Range | -50°C to 200°C (for Pt100) |
| Probe Diameter | 4mm (default) / Optional: 3mm, 5mm, 6mm, 8mm, etc. |
| Probe Length | 30mm (default) / Optional: 10-500mm |
| Cable Type | Silver-plated Teflon Shielded Wire, 3-core |
| Cable Length | 0.5m / 1m / 1.5m / 2m / 3m / Customizable up to 50m |
| Connector Type | U-shaped terminal (default) / Custom: Pin, Aviation |
| Sensor Element | Pt100 platinum resistance |
| Wiring System | Three-wire system default, optional two-wire or four-wire |
| Resistance at 0°C | 100 ohms |
| Accuracy Class | [To be filled by seller, e.g., Class B according to IEC 60751] |
| Power Supply | Passive resistance sensor, external measurement instrument required |
| Protection Features | Sealed structure, oil-resistant and splash-resistant |



For a comprehensive resistance value table across various temperatures, please refer to the full user manual PDF: PT100 Thermal Resistance Table (PDF).
3. Setup and Installation
3.1. Preparation
- Verify that the sensor type (Pt100) matches the input type of your temperature controller or measurement instrument.
- Confirm the required wiring configuration (two-wire, three-wire, or four-wire) before proceeding with installation.
- Inspect the probe and cable for any mechanical damage, kinks, or exposed wires prior to use.
3.2. Installation
- Insert the probe into the designated mounting hole or threaded port, ensuring full and firm contact between the probe sheath and the medium being measured.
- Secure the probe to avoid vibration or mechanical stress, which can affect accuracy and sensor lifespan.
- Connect the terminals according to the selected wiring system. For a three-wire configuration, connect the two identical color leads to the same polarity terminals as required by your controller.



4. Operation
4.1. Power On and Stabilization
- Power on the connected measurement instrument (e.g., temperature controller, PLC).
- Allow sufficient stabilization time for the probe to reach thermal equilibrium with the measured medium. This ensures accurate readings.
- Ensure that the measured temperature remains within the specified operating range of -50°C to 200°C.
4.2. Data Reading
- Read temperature values directly from the connected controller or display unit.
- If abnormal readings occur, first verify wiring continuity and ensure all terminals are tightly secured.
5. Maintenance
5.1. Storage
- Store the sensor in a dry and well-ventilated environment when not in use.
- Avoid exposing the probe to mechanical shock or heavy pressure.
- For long-term storage, protect terminals from oxidation and keep them away from high humidity conditions.
5.2. Cleaning
- Clean the probe surface with a soft cloth.
- Do not use abrasive materials or strong solvents, as these can damage the probe's stainless steel sheath.
6. Precautions and Safety Warnings
- Do not exceed the specified temperature range of -50°C to 200°C to prevent permanent sensor damage.
- Avoid excessive bending or pulling of the cable during installation and operation.
- Ensure proper grounding and shielding to minimize electrical interference and ensure accurate readings.
- Do not immerse the cable joint or terminal in liquid unless additional sealing protection specifically designed for that purpose is applied.
- This sensor is not designed for direct exposure to corrosive chemicals unless an upgraded material, such as 316 stainless steel, is specified for your model.
- Installation and maintenance should always be performed by qualified personnel.
- This product is intended for industrial temperature measurement applications only.
- Improper wiring may result in inaccurate readings or equipment malfunction.
- Do not use the sensor in explosive atmospheres unless it is specifically certified for ATEX compliance.
- Keep out of reach of children.
- For proper disposal, follow WEEE directives for electronic waste.
Note: The above warning information is for reference only. Final warning language must comply with the official language requirements of the destination country.
7. Troubleshooting
- Inaccurate or Erratic Readings:
- Verify that the sensor type (Pt100) matches the input configuration of your measurement instrument.
- Check all wiring connections for continuity and ensure terminals are securely tightened. Loose connections can cause unstable readings.
- Ensure the probe is in full and proper contact with the medium being measured. Air gaps can lead to incorrect temperature detection.
- Confirm that the operating temperature is within the sensor's specified range (-50°C to 200°C).
- Check for external electrical interference; ensure proper grounding and shielding.
- No Reading:
- Ensure the measurement instrument is powered on and functioning correctly.
- Inspect the cable for any visible damage or breaks.
- Verify that the wiring is correct according to the three-wire (or two/four-wire) system.
8. User Tips
- For optimal accuracy, allow the sensor to stabilize in the measurement environment for a few minutes after installation before taking readings.
- When customizing cable length, consider potential signal degradation over very long distances and ensure appropriate shielding.
- Always double-check the polarity of connections, especially in three-wire configurations where two identical color leads connect to the same polarity.
9. Warranty and Support
For technical consultations, bulk orders, or any support inquiries, please contact CERTEON Automation Store directly.
- WhatsApp: +86 19542723588
- Email: celiachen008@gmail.com

10. Compliance Disclaimer
This document is provided for product instruction purposes only. It does not constitute legal advice. The seller is responsible for ensuring compliance with destination market regulations.