1. Introduction
The JIKONG JK BMS (Battery Management System) is a smart active balance power management system designed for large capacity series-connected lithium battery packs. It provides comprehensive protection and active balancing to maximize battery consistency, improve battery range, and extend battery lifespan.
This manual provides detailed instructions for the safe and efficient use of your JIKONG JK BMS, covering models JK-BD6A20S20P and JK-BD6A24S20P. It supports various battery types including LiFePO4, Li-ion, and LTO.
2. Safety Information
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the battery pack from any power source before working on the BMS.
- Ensure all wiring is correctly connected according to the provided diagrams. Incorrect wiring can damage the BMS and battery.
- Wear appropriate personal protective equipment (PPE), including insulated gloves and eye protection, when handling batteries and electrical components.
- Do not short-circuit the battery terminals or BMS connections.
- Keep the BMS away from water, moisture, and flammable materials.
- Only use the BMS with compatible battery types and cell configurations as specified.
- If you are unsure about any part of the installation or operation, consult a qualified professional.
3. Package Contents
Verify that all items are present in your package:
- BMS Unit (x1)
- NTC Temperature Sensor (x1, 400mm length)
- Balance Wires (x1 set, 750mm length)
- Switch (x1, 500mm length)
- Packing Box (x1)

4. Specifications
| Feature | JK-BD6A20S20P | JK-BD6A24S20P |
|---|---|---|
| Balance Method | Active Balance | |
| Balance Current | 0.6A | |
| Charge/Discharge Current | 200A | |
| Battery Strings | 7S-20S | 8S-24S |
| Battery Type | LiFePO4/Li-ion/LTO | |
| Interface | BT (Built-in), LCD, Switch, Sampling, Temp. | |
| Output Cable | 7AWG/100mm | |
| Sampling Cable | 24AWG/750mm | |
| Dimensions (L*W*H) | 162mm * 102mm * 20.4mm | |
| Certification | CE, FCC, RoHS | |
| Usage Scenario | Power BMS | |
| Charge and Discharge Port | Common Port BMS | |
Protection Functions:
- Overcharge Protection
- Over Discharge Protection
- Overcurrent Protection
- Short Circuit Protection
- Overvoltage Protection
- Over Temperature Protection
- Low Temperature Protection during charge


5. Setup and Installation
Careful wiring is crucial for the proper function and safety of your BMS. Refer to the wiring diagram (Figure 2) and interface diagram (Figure 4) for guidance.
Wiring Steps:
- Prepare the Battery Pack: Ensure your battery pack is assembled with the correct number of cells in series (7S-20S for JK-BD6A20S20P, 8S-24S for JK-BD6A24S20P) and that all cells are balanced before connecting the BMS.
- Connect Main Power Cables:
- Connect the main negative terminal of the battery pack to the 'B-' terminal on the BMS.
- Connect the main negative terminal of the load/charger to the 'P-' terminal on the BMS.
- Connect the main positive terminal of the battery pack to the positive terminal of the load/charger (this connection bypasses the BMS for the positive side).
- Connect Balance Wires:
- Start by connecting the 'B-' wire (often black) from the balance cable harness to the main negative terminal of the battery pack.
- Sequentially connect the remaining balance wires (B1, B2, B3, etc.) to the positive terminals of each cell in series, starting from the first cell (B1 to the positive of cell 1, B2 to the positive of cell 2, and so on).
- Ensure the last balance wire (e.g., B20 for a 20S pack) is connected to the main positive terminal of the battery pack.
- Once all individual balance wires are connected to the battery, plug the balance wire harness into the corresponding port on the BMS.
- Connect NTC Temperature Sensor: Plug the NTC sensor into the designated port on the BMS and place the sensor on a battery cell or within the battery pack to monitor temperature.
- Connect Switch: Connect the provided switch to its dedicated port on the BMS. This switch can be used to turn the BMS on/off or activate certain functions.
- Optional Connections: If using customized features like RS485, CAN, GPS, or an external LCD display, connect them to their respective ports as shown in Figure 4.

Important: Always connect the B- and balance wires before connecting P- to avoid damage to the BMS.
6. Operation
The JIKONG JK BMS is a smart system that can be monitored and controlled via a mobile application or PC software.
Mobile App & Bluetooth Connectivity:
The 'JIKONG SMART BMS' mobile application (available for iOS, Android, and HarmonyOS) acts as a personal lithium battery steward, providing real-time data and control over your battery pack. The BMS features a built-in Bluetooth module for wireless communication.
- Download the App: Search for 'JIKONG SMART BMS' in your device's app store and install it.
- Enable Bluetooth: Ensure Bluetooth is enabled on your mobile device.
- Connect to BMS: Open the app, search for available Bluetooth devices, and select your JIKONG BMS. The app supports multiple languages, which can be switched automatically with your phone's system language.
App Functions:
Through the app, you can access various functions and real-time data:
- Real-time Monitoring: View individual cell voltages, total voltage, current, temperature, battery capacity (SOC), and more.
- Control Functions:
- Charge ON/OFF
- Discharge ON/OFF
- Balance ON/OFF (Active Balancing)
- Emergency ON/OFF
- Modify PVD (Protection Voltage Settings)
- Settings: Adjust parameters like Display Always On, Smart Sleep, Saved Stored Data, and Disable Temp. Sensor.
- Data Logging: Accurate time logging of battery events.
Other Display Options:
The BMS also supports connection to PC software for more advanced monitoring and configuration, and an optional JIKONG 4.3LCD display for direct visual feedback.

Functional Characteristics:
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 (Customized)
- Support CAN (Customized)
- Support alarm function
- Support heating function (Customized)
- Support GPS communication (Customized)

Active Balancing:
The JIKONG BMS employs active balancing (lossless balancing) technology. This process achieves voltage balance by transferring energy from cells with higher energy to cells with lower energy, minimizing energy loss and maximizing battery consistency. This high current active balancing (0.4A-2A) improves battery range and delays battery aging.

7. Maintenance
The JIKONG JK BMS is designed for durability and reliability. Regular maintenance is minimal but important for optimal performance:
- Keep Clean: Ensure the BMS unit is kept clean and free from dust, dirt, and debris. Use a dry, soft cloth for cleaning.
- Check Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. The aluminum alloy shell provides superior heat dissipation, but ensure adequate airflow around the unit.
- Firmware Updates: Check the JIKONG official website or app for any available firmware updates to ensure your BMS has the latest features and improvements.
8. Troubleshooting
If you encounter issues with your JIKONG JK BMS, consider the following basic troubleshooting steps:
- No Power/No Indication:
- Check all main power connections (B-, P-) and ensure they are secure.
- Verify the battery pack voltage is within the operational range of the BMS.
- Ensure the external switch (if used) is in the 'ON' position.
- App Connection Issues:
- Ensure Bluetooth is enabled on your mobile device.
- Restart the app and try reconnecting.
- Ensure the BMS is powered on.
- Check if there are other devices interfering with the Bluetooth signal.
- Balancing Not Active/Uneven Cell Voltages:
- Verify all balance wires are correctly connected to each cell's positive terminal and the main negative terminal.
- Ensure the balance function is enabled in the mobile app.
- Allow sufficient time for active balancing to occur, especially with large cell voltage differences.
- Over-Protection Triggered:
- Identify the specific protection (e.g., overcharge, over-discharge, overcurrent) indicated by the app or LCD.
- Address the root cause (e.g., reduce charge current, reduce load, check for short circuits).
- The BMS typically auto-recovers once the condition is resolved, or can be reset via the app/switch.
For persistent issues, please contact JIKONG customer support.
9. User Tips
- Initial Cell Balancing: For best results, ensure your battery cells are as closely balanced as possible before connecting the BMS. While the active balance feature is powerful, starting with well-balanced cells reduces the initial workload on the BMS.
- Regular Monitoring: Utilize the mobile app to regularly monitor your battery pack's health. This allows you to catch potential issues early and understand your battery's performance over time.
- Proper Sizing: Ensure the BMS current rating (200A) is appropriate for your application's maximum continuous charge and discharge currents.
- Application Scenarios: The JIKONG BMS is suitable for a wide range of applications including E-bikes, Electric Tricycles, Low Speed Quads, Forklifts, Cleaning Cars, Tourist Cars, Industrial Drones, Scooters, RV Energy Storage, and general Lithium battery packs/Power Banks.

10. Warranty and Support
JIKONG products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official JIKONG website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.