1. Product Overview
This industrial accessory is specially designed for industrial equipment installation, operation, maintenance and auxiliary use, widely applicable to machinery manufacturing, factory production lines, industrial automation, engineering equipment and other industrial scenarios. It is manufactured with high-quality materials and precision processing technology, featuring high durability, strong load-bearing capacity, good compatibility and stable performance, which can effectively improve the operation efficiency of industrial equipment and extend the service life of the equipment.
Core Features:
- Made of high-strength industrial-grade materials, corrosion-resistant, wear-resistant and high-temperature resistant, suitable for harsh industrial environments.
- Precision design, perfect matching with various industrial equipment, easy to install and disassemble, reducing maintenance time.
- Strong load-bearing capacity and stable performance, ensuring long-term safe operation under industrial working conditions.
- Good compatibility, suitable for multiple models and specifications of industrial equipment, with strong versatility.
- Complies with industrial safety standards, equipped with necessary safety protection structures (if applicable), to ensure operational safety.
Video showing the warehouse and inventory of server system motherboards, including the TYAN S2865 S2865G2NR 939 model.
2. Safety Warnings (MUST READ)
This product is used in industrial scenarios. Improper use, installation or maintenance may cause equipment damage, personal injury, industrial accidents or property loss. All operators must read and strictly follow all warnings and operating instructions before using this product. Operators must wear appropriate personal protective equipment (PPE) during operation.
- Only trained and qualified operators are allowed to install, use and maintain this industrial accessory. Unauthorized personnel are prohibited from touching, disassembling or modifying the product.
- Before installation and use, check whether the product is damaged (such as cracks, deformation, wear, loose parts, etc.). If any damage is found, stop using it immediately and replace it with a new one. Do not use damaged accessories.
- Ensure that the installation environment meets the product requirements. Do not install or use the product in flammable, explosive, corrosive, high-pressure or other dangerous environments unless the product is specially designed for such scenarios.
- During installation, ensure that the accessory is correctly aligned with the industrial equipment, and the connection is firm and reliable. Do not force installation, which may damage the accessory or the connected equipment.
- During operation, do not touch the moving parts of the accessory and the connected equipment (if any) to avoid pinching, scratching or other personal injuries.
- Do not overload the accessory beyond its rated load capacity. Overloading may cause the accessory to break, deform or fail, leading to industrial accidents.
- Before performing maintenance, inspection or disassembly, turn off the power supply of the connected industrial equipment, cut off the energy source (such as electricity, gas, oil), and hang a "No Operation" sign to avoid accidental startup.
- Keep the product away from children and unrelated personnel. The working area should be clean and tidy, without obstacles, to ensure safe operation space.
- Do not use the product for purposes other than its intended use. Misuse may cause product damage and safety hazards.
- If the product fails during use (such as abnormal noise, deformation, failure to work normally), stop using it immediately, disconnect it from the equipment, and contact professional maintenance personnel for inspection and repair. Do not attempt to repair it yourself.
3. Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Industrial Accessory |
| Material | Please refer to the official website data for accuracy |
| Rated Load | Please refer to the official website data for accuracy |
| Working Temperature Range | Please refer to the official website data for accuracy |
| Size (L×W×H) | Please refer to the official website data for accuracy |
| Weight | Please refer to the official website data for accuracy |
| Compatibility | Please refer to the official website data for accuracy |
| Corrosion Resistance Level | Please refer to the official website data for accuracy |
| Service Life | Please refer to the official website data for accuracy |
| Certifications | CE, FCC, RoHS, ISO9001 |
4. Installation Instructions
Installation must be performed by trained and qualified operators. Before installation, confirm that the industrial equipment connected to the accessory is turned off and the energy source is cut off. Prepare the required installation tools and personal protective equipment (such as gloves, goggles, safety shoes) in advance.
4.1 Installation Preparation
- Check the industrial accessory and all installation accessories (such as screws, nuts, washers) for damage, deformation or missing parts. If any problem is found, replace or supplement them in time.
- Check whether the installation position of the industrial equipment is clean, flat and firm, and remove any dirt, oil stains, rust or obstacles that may affect the installation.
- Confirm that the installation position and size of the equipment match the accessory, and the load-bearing capacity of the installation position meets the product's rated load requirements.
- Prepare the required installation tools: screwdriver, wrench, pliers, measuring tool (ruler, caliper), welding tool (if necessary), etc.
4.2 Installation Steps
- Place the industrial accessory at the designated installation position, and use a measuring tool to adjust the position to ensure that it is aligned with the installation hole of the equipment and the level is correct (if required).
- Fix the accessory to the equipment using the matching installation accessories (screws, nuts, washers). Tighten the fasteners according to the specified torque to ensure that the connection is firm and there is no looseness. Do not over-tighten, which may damage the threads or the accessory.
- If welding is required for installation, ensure that the welding operation is performed by professional welders, and the welding quality meets the industrial standards. After welding, check the welding joint for cracks, pores or other defects.
- After installation, install the necessary protective parts (such as protective covers, gaskets) according to the requirements to prevent dust, oil stains or other impurities from entering the accessory and affecting its performance.
- Perform a preliminary inspection: manually check whether the accessory is firmly installed, whether it can move freely (if it is a movable accessory), and whether there is any interference with other parts of the equipment.
4.3 Installation Notes
- Do not install the accessory in a position that is subject to strong vibration, impact or high temperature for a long time, which may reduce the service life of the accessory.
- During installation, avoid scratching the surface of the accessory and the equipment to prevent corrosion.
- If multiple accessories are installed at the same time, ensure that their installation positions are accurate and the load is evenly distributed.
- After installation, record the installation date, operator and other information for future maintenance and inspection.

Figure 1: Top-down view of the TYAN S2865 S2865G2NR 939 Server System Motherboard.

Figure 2: Angled view of the motherboard showing various ports and slots.

Figure 3: Close-up of motherboard components and expansion slots.
5. Usage Instructions
- Before using the accessory, check the installation condition of the accessory again to ensure that it is firmly installed, there is no looseness, deformation or damage, and all protective parts are installed in place.
- Turn on the power supply or start the energy source of the industrial equipment, and run the equipment idly for a period of time to check whether the accessory works normally, whether there is abnormal noise, vibration or overheating.
- During normal operation, strictly control the load within the rated load range of the accessory, and do not overload. Pay attention to observing the working state of the accessory at any time. If any abnormality is found, stop the equipment immediately for inspection.
- For movable industrial accessories, regularly check the flexibility of their movement, and add lubricating oil (if required) according to the instructions to ensure smooth movement.
- During operation, operators must wear personal protective equipment as required, and do not approach the moving parts of the accessory and the equipment at will.
- Do not adjust, disassemble or modify the accessory during operation, which may cause safety hazards and equipment failure.
- After the operation is completed, turn off the power supply or cut off the energy source of the equipment, and clean the surface of the accessory to remove dust, oil stains and other impurities.
6. Maintenance and Care
Regular maintenance and care can effectively extend the service life of the industrial accessory and ensure its stable performance. Establish a regular maintenance system according to the actual working conditions and service life of the accessory.
6.1 Daily Maintenance
- After each use, clean the surface of the accessory with a dry, clean cloth to remove dust, oil stains, dirt and other impurities. Do not use corrosive cleaners.
- Check the installation tightness of the accessory and the fasteners, and re-tighten them if there is any looseness.
- Check whether the surface of the accessory is corroded, worn or deformed. If any problem is found, deal with it in time.
- For accessories that need lubrication, add an appropriate amount of industrial lubricating oil according to the requirements to ensure smooth movement and reduce wear.
6.2 Regular Inspection
- Conduct a comprehensive inspection every [1 month/3 months/6 months, Please Fill in Actual Cycle] according to the working frequency and environment:
- Check the structural integrity of the accessory, whether there are cracks, deformation, wear or damage.
- Check the connection part of the accessory and the equipment, whether the fasteners are missing, loose or damaged.
- Check the performance of the accessory, whether it can work normally, and whether there is any abnormal phenomenon.
- For accessories with corrosion resistance requirements, check the corrosion condition and do anti-corrosion treatment if necessary.
- Record the inspection results, and replace the damaged accessories in time. Do not continue to use the accessories that do not meet the use requirements.
6.3 Storage Requirements
- If the accessory is not used for a long time, disassemble it from the equipment, clean it thoroughly, and do anti-corrosion treatment (such as applying anti-rust oil) if necessary.
- Store the accessory in a cool, dry, well-ventilated warehouse, away from flammable, explosive, corrosive substances and direct sunlight.
- Store the accessory in a clean and tidy place, avoid collision, extrusion and damage, and place it according to the specifications to prevent deformation.
- Mark the stored accessory clearly (model, specification, storage date) for easy retrieval and use.
7. Troubleshooting
| Troubleshooting Phenomenon | Possible Causes | Solutions |
|---|---|---|
| Accessory is loose during operation | 1. Fasteners are loose or missing; 2. Installation torque is insufficient; 3. The installation surface is uneven or dirty; 4. The accessory is worn or deformed | 1. Check and tighten the fasteners, supplement the missing fasteners; 2. Tighten the fasteners according to the specified torque; 3. Clean and level the installation surface; 4. Replace the worn or deformed accessory |
| Abnormal noise during accessory operation | 1. Lack of lubrication (movable accessory); 2. The accessory is worn or deformed; 3. The accessory is not aligned with the equipment; 4. Foreign objects enter the accessory | 1. Add appropriate lubricating oil; 2. Replace the worn or deformed accessory; 3. Adjust the position of the accessory to ensure alignment; 4. Stop the equipment, remove foreign objects |
| Accessory is deformed or broken | 1. Overload use; 2. Subject to strong impact or vibration; 3. Material fatigue after long-term use; 4. Improper installation or use | 1. Stop using immediately, replace with a new accessory; 2. Check the installation environment and avoid impact and vibration; 3. Replace the accessory regularly according to the service life; 4. Install and use according to the instructions |
| Accessory is corroded | 1. Working environment is corrosive; 2. Lack of anti-corrosion treatment; 3. The accessory is in contact with corrosive substances | 1. Do anti-corrosion treatment on the accessory, or replace it with a corrosion-resistant accessory; 2. Improve the working environment, avoid contact with corrosive substances; 3. Clean the accessory in time after contact with corrosive substances |
| Accessory fails to work normally | 1. Incorrect installation; 2. The accessory is damaged or worn; 3. Incompatible with the connected equipment; 4. Overload use | 1. Reinstall according to the instructions; 2. Replace the damaged or worn accessory; 3. Check the compatibility, replace with a suitable accessory; 4. Control the load within the rated range |
8. Warranty and Service
We provide a 12-month limited warranty for this industrial accessory from the date of purchase. The warranty only covers manufacturing defects, not damage caused by improper installation, use, maintenance, overload, accident, modification or natural wear and tear.
During the warranty period, if the product has any quality problems that meet the warranty conditions, we will provide free repair or replacement services. Please contact our customer service with your purchase certificate and product information (model, SKU, purchase date) for after-sales support.
For technical consultation, maintenance guidance or after-sales complaints, please contact us through the following channels:
- Email: lilyan@wefound.net.cn
- Working Hours: 9:00-18:00 (GMT+8), Monday to Friday
9. Compliance Statement
This industrial accessory complies with the requirements of EU CE, FCC, RoHS, ISO9001 and other relevant industrial safety and environmental protection standards. It has passed strict quality inspection and performance testing before leaving the factory, and can be safely used in industrial scenarios in accordance with the operating instructions.
The user shall strictly abide by the relevant national and local industrial safety regulations and the requirements of this manual when using this product. Any safety accident or product damage caused by improper use shall be borne by the user.