1. Product Overview
The JIKONG JK BMS (Battery Management System) is an intelligent protection board designed for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, a coulomb meter, Bluetooth communication, and optional GPS remote functions. It is compatible with LiFePO4, ternary lithium, and LTO battery types.
This protection board utilizes energy transfer active balancing technology, capable of achieving a maximum continuous 0.6A balance current. This high-current active equalization technology ensures battery consistency, improves battery range, and extends battery life.
The BMS is supported by a mobile APP for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. Its compact size, ease of operation, and comprehensive functions make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.


2. Specifications
The JIKONG JK BMS is available in two main models: JK-BD6A20S10P and JK-BD6A24S10P. Key specifications are detailed below.
2.1. General Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 20-100 | V |
| Operating Power Consumption | <800 | mW |
| Operating Temperature | -30 to 70 | °C |
| Max. Number of Collection Strings | 24 | String |
| Max. Balancing Current | 0.6 | A |
| Max. Charging Current | 100 | A |
| Max. Discharge Current | 100 | A |
| Max. Instantaneous Current | 200 | A |
| Max. Internal Loop Resistance | 0.702 | mΩ |
| Protective Plate Size | 162*102*20.4 | mm |
| Finished Weight | 360 | g |


2.2. Functional Characteristics
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 & CAN communication (optional)
- Support alarm function
- Support heating function (optional)
- Support GPS communication (optional)
- Comprehensive protection functions: Charge overcurrent, overvoltage, over temperature, low temperature; Discharge overcurrent, undervoltage, over temperature; Short circuit protection.

3. Setup and Installation
3.1. Package Contents
Before installation, verify that all components are present in the package:
- BMS * 1
- NTC Temperature Sensor * 1 (400mm long)
- Balance Wires * 1 (750mm)
- Switch * 1 (500mm)
- Packing box * 1

3.2. Wiring Diagram and Installation Method
The JK-BD6AxxS-10P series protection board is suitable for 7-24 series lithium battery packs. The wiring method varies depending on the number of cells in your battery pack. Always ensure correct connections to avoid damage or malfunction.

Before powering on the protection board, double-check that the balance cable is properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to serious consequences, including abnormal operation or even burning.
3.3. Device Activation
The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.
Alternatively, if you have chosen a display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.
3.4. APP Installation
The mobile APP for the JIKONG BMS can be downloaded by scanning the QR code below. An Android version 7 or higher is required for the Android APP.

4. Operation Instructions
4.1. Active Equalization
The active equalization function transfers energy from higher-voltage cells to lower-voltage cells to maintain battery consistency. Before using this function, set the basic battery parameters (battery type, number of cells, battery capacity) in the JIKONG APP. You can also set the balance trigger pressure difference (mV).
When active balancing is enabled, it automatically activates when the voltage difference between any two battery strings exceeds the set value, and deactivates when the difference falls below the set value. The default balance current is 0.6A, adjustable based on battery capacity (recommended not to exceed 0.2C of battery capacity). If not needed, disable the balancing switch in the APP.

4.2. APP and Display Interface
The JIKONG BMS provides a mobile APP and supports an optional display screen for monitoring and control. The APP allows you to view battery status, modify parameters, and control charge/discharge switches. The display screen offers a convenient way to view battery information directly.

4.3. Parameter Setting
All operational parameters, including protection thresholds and recovery values, can be configured via the mobile APP. Refer to the "Instructions for Setting Protection Board Parameters" within the APP for detailed guidance.
4.4. Optional Features
- GPS Interface: The BMS reserves a GPS port for optional GPS devices, enabling battery location tracking for personal or enterprise use.
- Heating Function: An optional heating function uses a resistance heater or heating film to warm the battery at low temperatures, preventing performance degradation. The designed heating current is 4A. This function can be switched on/off via the APP. For safety, it is recommended to use a temperature control switch (45°C-65°C normally closed) in series with the heating circuit.
- Communication Functions (CAN/RS485): The BMS supports optional CAN/RS485 communication. Users can set the address and communication protocol according to their specific requirements and scenarios.

5. Maintenance and Protection
The JIKONG JK BMS is equipped with various protection mechanisms to ensure the safety and longevity of your battery pack.
5.1. Overvoltage Protection (Charge)
The BMS includes standard charge overvoltage protection. Users can set the single cell overcharge protection voltage and recovery voltage in the APP. If any cell's voltage exceeds the set protection value during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage.
5.2. Undervoltage Protection (Discharge)
Standard discharge undervoltage protection is provided. Users can set the battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP. If any cell's voltage falls below the protection value during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. The BMS will automatically shut down if any cell voltage drops below the automatic shutdown voltage.
5.3. Overcurrent Protection (Charge & Discharge)
The BMS features standard charge and discharge overcurrent protection. Users can set continuous current, overcurrent delay, and recovery time in the APP. If the current exceeds the set continuous current for the specified delay, the BMS will trigger protection and stop the operation. It will resume after the recovery time. Note: The maximum continuous discharge current should not exceed 100A.
5.4. Over/Low Temperature Protection
Standard charge and discharge over-temperature protection is included. Users can set protection and recovery temperatures in the APP. The BMS will stop charging/discharging if temperatures exceed/fall below set thresholds and resume when temperatures return to safe levels. For extremely cold environments, using the optional heating function is recommended.
5.5. Short Circuit Protection
The BMS comes with standard short circuit protection. Users can set the short circuit protection delay (in microseconds) and recovery time (in seconds) in the APP. If a short circuit is detected, the BMS will trigger protection and stop the operation, resuming after the set recovery time.
5.6. Intelligent Sleep
The intelligent sleep function allows the BMS to enter a low-power standby mode (when charge/discharge current is less than 1A for 26 consecutive hours) to reduce self-consumption. The BMS can be reactivated by pressing a button (if equipped) or by connecting a charger.
6. Troubleshooting
6.1. Alarm Function
The BMS supports an optional alarm function. If the BMS detects security risks such as over-temperature, overcharge, or over-discharge, it will trigger an external alarm to alert the user.6.2. Emergency Switch
The BMS is equipped with a standard emergency switch function. In case of issues like over-temperature, over-discharge, overcharge, or cell string drops during normal use, activating the emergency switch in the APP's BMS control page will enable charge and discharge for 30 minutes. This provides an emergency operational period, even if a single cell voltage reaches the automatic shutdown threshold, to help avoid critical situations.6.3. Common Issues and Solutions
- BMS not activating: Ensure the balance cable is properly connected, P- and B- terminals are correct, and the BMS is securely fixed. Activate by connecting a charger (charger voltage 2V higher than battery voltage) or by pressing the activation button/display (if equipped).
- Charging/Discharging stops unexpectedly: Check for overvoltage, undervoltage, overcurrent, or over/low temperature protection triggers. Review and adjust parameters in the APP if necessary.
- Short circuit protection triggered: If triggered upon connecting a charger or load, increase the short circuit protection delay in the APP. This can resolve issues caused by instantaneous peak currents from chargers or large capacitive loads.
- Battery inconsistency: Ensure active equalization is enabled and parameters are set correctly in the APP. The 0.6A active balancing current helps maintain cell consistency.
7. User Tips
- Always double-check all wiring connections before powering on the BMS to prevent damage.
- Regularly monitor battery parameters via the mobile APP to ensure optimal performance and detect potential issues early.
- For cold climates, consider utilizing the optional heating function and ensure a temperature control switch is installed for added safety.
- When adjusting protection parameters, make small incremental changes and observe the system's behavior.
- Keep the mobile APP updated to the latest version for new features and improved stability.
8. Warranty and Support
This product is manufactured by Chengdu Jikong Technology Co.LTD. For technical support, troubleshooting assistance, or any inquiries regarding the product, please contact the seller or manufacturer directly.
For detailed information on return and refund policies, please refer to the official seller's terms and conditions. The product is designed for reliability and includes various protections to ensure safe operation when installed and used correctly.
A comprehensive PDF user manual is available for download, providing in-depth technical details and instructions. You can access it here: JIKONG JK BMS User Manual (PDF).