KCEVE KC-KVM202DPA

Contents

KCEVE DP KVM Switch Dual Monitor Displayport 1.4 User Manual

Model: KC-KVM202DPA

1. Introduction

The KCEVE DP KVM Switch (Model: KC-KVM202DPA) allows you to control two DisplayPort-enabled computers using a single set of keyboard, mouse, and two DisplayPort monitors. This device supports DisplayPort 1.4, enabling high-resolution video output up to 8K@30Hz and 4K@120Hz, along with USB 2.0 peripheral sharing. It is designed for easy installation and seamless switching between connected systems.

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x KCEVE DP KVM Switch (KC-KVM202DPA)
  • 2 x DisplayPort Cable (1.5m)
  • 2 x USB Cable (1.5m)
  • 1 x Wired Remote Control
  • 1 x User Manual (English)

3. Product Diagram

KVM Switch front and rear panel layout
Front and Rear Panel Layout of the KCEVE DP KVM Switch. The top view shows DP Monitor outputs (OUT A, OUT B), PC1 inputs (DP INPUT B1, DP INPUT A1, USB 1), and PC2 inputs (DP INPUT B2, DP INPUT A2, USB 2). The bottom view shows USB ports for keyboard, mouse, and other peripherals, along with a 'SELECT' button and DC/5V power input.
KVM Switch front panel with PC selection buttons
Front panel of the KVM switch showing PC selection buttons (1 and 2) and corresponding LED indicators.

4. Setup Instructions

Follow these steps to connect your KCEVE DP KVM Switch:

  1. Power Connection: Connect the DC/5V power adapter (not included, typically a standard USB power adapter) to the KVM switch's DC/5V input port. This ensures stable operation.

    KVM Switch DC 5V power input
    Close-up of the KVM switch showing the DC/5V power input port.
  2. Monitor Connections: Connect your two DisplayPort monitors to the KVM switch's 'OUT A' and 'OUT B' DisplayPort outputs.

  3. Computer 1 Connections:

    • Connect DisplayPort cables from PC1's graphics card to the KVM switch's 'INPUT A1' and 'INPUT B1' DisplayPort inputs.
    • Connect a USB cable from PC1 to the KVM switch's 'USB 1' input.

    Important Note for Dual Monitor Setup: Both DP input A1 and B1 of PC1 must be connected simultaneously for dual monitor output (OUT A/B) to function correctly. If only one input (A1 or B1) is connected, only one monitor output will be available for that PC.

  4. Computer 2 Connections:

    • Connect DisplayPort cables from PC2's graphics card to the KVM switch's 'INPUT A2' and 'INPUT B2' DisplayPort inputs.
    • Connect a USB cable from PC2 to the KVM switch's 'USB 2' input.
  5. Peripheral Connections: Connect your USB keyboard, USB mouse, and any other USB 2.0 peripherals (e.g., printer, USB flash drive) to the USB ports on the KVM switch's front panel.

  6. Wired Remote Control: Connect the wired remote control to its dedicated port on the KVM switch for convenient switching.

KVM Switch complete setup diagram
Diagram illustrating the complete connection setup for the KCEVE DP KVM Switch, showing two computers connected to two monitors, a keyboard, and a mouse.

5. Operating Instructions

5.1. Switching Between Computers

You can switch between PC1 and PC2 using one of the following methods:

  • Front Panel Button: Press the 'SELECT' button on the front panel of the KVM switch to toggle between PC1 and PC2. The corresponding LED indicator (1 or 2) will light up to show the active computer.
  • Wired Remote Control: Use the wired remote control to switch between computers.

5.2. Display Modes (Extended and Copy)

The KVM switch supports both Extended and Copy display modes for your dual monitors. To configure these modes on your computer (Windows OS):

  1. Press the Windows key + P key on your keyboard.
  2. A menu will appear, allowing you to choose your desired display mode:
  • Extended Mode: In this mode, your two monitors act as a single, larger desktop. You can drag windows from the main screen to the second output screen using your mouse.
  • Copy Mode: In this mode, both monitors will display the exact same image from the selected PC.
Extended and Copy Display Modes
Illustration of Extended Mode (two distinct desktops) and Copy Mode (identical content on both screens) for dual monitors.

6. Specifications

FeatureDescription
ModelKC-KVM202DPA
TypeDP KVM Switch
Video Input2 x DisplayPort (DP 1.4 compatible)
Video Output2 x DisplayPort (Monitor)
USB Input (to PCs)2 x USB-B (for PC1 and PC2)
USB Output (for Peripherals)4 x USB-A (USB 2.0 HUB, for Keyboard, Mouse, Printer, SSD, etc.)
Max Video Resolution7680x4320@30Hz (8K@30Hz)
Supported Resolutions3840x2160@120Hz/60Hz (4K@120Hz/60Hz), 1440P@165Hz/144Hz/120Hz/60Hz, 1080P@165Hz/144Hz/120Hz/60Hz (depending on system and hardware)
Switching ModesPhysical button, Wired remote control
Display ModesExtended, Copy (Mirrored)
Special FeaturesBuilt-in automatic adjustment system, Built-in ESD protection system, Plug and Play
ColorBlack
MaterialMetal + ABS
Dimensions108 x 64.8 x 30.3 mm

7. Maintenance

To ensure the longevity and optimal performance of your KVM switch:

  • Keep the device in a cool, dry place, away from direct sunlight and heat sources.
  • Avoid exposing the device to moisture or extreme temperatures.
  • Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • Ensure proper ventilation around the device to prevent overheating.

8. Troubleshooting

If you encounter issues with your KVM switch, please try the following:

  • No Display/Signal:
    • Ensure all DisplayPort cables are securely connected to both the KVM switch and your computers/monitors.
    • Verify that the KVM switch is powered on and the correct PC is selected (check LED indicator).
    • Confirm that your monitors are powered on and set to the correct DisplayPort input.
    • Check your computer's display settings to ensure the monitors are detected and configured correctly (e.g., Extended or Copy mode).
    • Try connecting the monitors directly to the computer to rule out cable or monitor issues.
  • Keyboard/Mouse Not Responding:
    • Ensure the USB cables from your computers are securely connected to the KVM switch's 'USB 1' and 'USB 2' inputs.
    • Verify that your keyboard and mouse are connected to the USB ports on the KVM switch.
    • Try connecting the keyboard and mouse directly to the computer to confirm they are functional.
    • Some specialized gaming keyboards/mice with advanced features may require direct connection to the PC or may not function fully through a KVM switch.
  • Intermittent Issues:
    • Ensure the KVM switch is receiving adequate power via its DC/5V input.
    • Check for any loose cable connections.
    • Restart the KVM switch and your connected computers.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. General tips for KVM switches include:

  • Always ensure all cables are firmly seated to prevent signal loss.
  • For optimal performance, use high-quality DisplayPort cables, especially for higher resolutions and refresh rates.
  • If you experience display issues, try updating your graphics card drivers on both connected computers.

10. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt or order details handy as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.