1. Introduction
Thank you for choosing the HYULIGHTS HYU-200PS LED RGBW 4-in-1 Pixel Bar Strobe Light. This device is a powerful and versatile lighting solution designed for professional stage and DJ applications. Please read this manual carefully to ensure proper setup, operation, and maintenance of your new lighting fixture.
1.1 Unboxing
Upon unpacking the device, please verify that all components are present and in good condition. The carton box should contain:
- One HYULIGHTS HYU-200PS LED RGBW 4-in-1 Pixel Bar Strobe Light
- One Power Cable
- One User Manual (this document)
- One DMX Cable
- One Bow Mount and two Screws for mounting
2. Setup
2.1 Mounting
The HYU-200PS can be mounted using the included bow mount. Ensure the fixture is securely fastened to a stable structure capable of supporting its weight. Use the provided screws to attach the bow mount to the fixture, then secure the fixture to your desired mounting point (e.g., truss, wall, or floor stand).
2.2 Connections
Refer to the rear panel diagram for connection points:
- Power Connection: Connect the provided power cable to the 'POWER IN' port. For daisy-chaining multiple units, use the 'POWER OUT' port to connect to the next fixture. Ensure the voltage matches the fixture's requirements (110V~240V, 50-60Hz).
- DMX Connection: Use the provided 3-pin XLR DMX cable to connect your DMX controller to the 'DMX IN' port. For daisy-chaining, connect the 'DMX OUT' port to the 'DMX IN' of the next fixture in the chain.
3. Operating Instructions
The HYU-200PS offers multiple control modes and features for dynamic lighting effects.
3.1 Control Modes
The fixture supports the following control modes, selectable via the operation display and buttons on the rear panel:
- Auto Mode: The fixture runs through pre-programmed internal effects automatically.
- Sound Mode: The fixture reacts to ambient sound, creating dynamic light patterns synchronized with music.
- DMX Mode: Provides full control over the fixture's parameters using an external DMX controller.
- Master/Slave Mode: Link multiple fixtures together. One acts as the master, controlling the others (slaves) to create synchronized effects.
- RDM (Remote Device Management): Allows for remote addressing and configuration of DMX fixtures.
3.2 Channel Modes
The fixture supports various DMX channel modes (4/6/16/192/194 Channel) to suit different control needs. The 192/194 Channel modes allow for programming numbers and letters, offering advanced customization.
3.3 Strobe and Dimming
- Strobe: The fixture features variable strobe speeds, which can be applied to any color.
- Dimmer: A 0-100% smooth dimming function allows for precise control over light intensity.
3.4 Built-in Effects
The HYU-200PS comes with built-in features including 4 SOUND modes and 50 Auto effect modes, providing a wide range of dynamic lighting options without external control.
3.5 Product Demonstration Video
Watch the official product demonstration video to see the HYULIGHTS HYU-200PS in action, showcasing its various lighting modes, effects, and capabilities.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your HYULIGHTS HYU-200PS fixture.
- Cleaning: Periodically clean the exterior of the fixture with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners.
- Ventilation: Ensure the cooling fans (visible on the rear panel) are free from dust and obstructions to prevent overheating.
- Housing: The machine housing is made of durable aluminum with electrostatic powder painting, providing robust protection. Avoid dropping or subjecting the fixture to strong impacts.
- Cable Inspection: Regularly check all power and DMX cables for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
5. Troubleshooting
If you encounter issues with your HYULIGHTS HYU-200PS, try the following basic troubleshooting steps:
- No Power: Check the power cable connection to both the fixture and the power outlet. Ensure the power source is active.
- No Light Output: Verify that the fixture is receiving power and is not in a dimmed state (check dimmer settings). Ensure the correct control mode is selected.
- DMX Control Issues: Check all DMX cable connections. Ensure the DMX address on the fixture matches your controller settings. Verify that the DMX signal is being sent correctly from your controller. Try a different DMX cable.
- Intermittent Operation: Check for loose power or DMX connections. Ensure the fixture is not overheating (check fan operation and clear any obstructions).
- Unresponsive Controls: Power cycle the device (turn off, wait a few seconds, then turn on). If using DMX, try disconnecting the DMX cable and testing in Auto or Sound mode.
If problems persist after attempting these steps, please contact HYULIGHTS customer support for further assistance.
6. Specifications
| Parameter | Value |
|---|---|
| Voltage | 110V~240V, 50-60Hz |
| Power Consumption | 200W |
| LED Type (RGB) | 576 x 0.25W 5050RGB 3in1 (48 independently controlled pixels) |
| LED Type (White) | 288 x 0.3W 2835 white LED (48 independent control pixels) |
| Channel Modes | 4/6/16/192/194 Channel |
| Strobe | Variable strobe speeds (any color) |
| Dimmer | 0-100% smooth dimming |
| DMX Connector | 3-pin XLR input/output |
| Control Modes | Auto, Sound, DMX, Master/Slave, RDM |
| Housing Materials | Aluminum case |
| Cover Painting | Electrostatic powder painting |
| Features | Built-in 4 SOUND modes, 50 Auto effect modes |
| Net Weight (N.W) | 3kg |
| Gross Weight (G.W) | 4kg |
| Product Size | 100.5 x 13 x 8 cm |
| Package Size | 103.5 x 16.5 x 13 cm |
7. User Tips
No specific user tips were available from external sources at the time of this manual's creation. However, general best practices for stage lighting include:
- Always ensure proper ventilation around the fixture to prevent overheating.
- When using DMX, ensure all DMX cables are terminated correctly to avoid signal issues.
- Experiment with different channel modes to find the best balance between control and simplicity for your setup.
- Utilize the built-in sound and auto modes for quick and easy dynamic effects without a DMX controller.
8. Warranty and Support
HYULIGHTS is committed to providing high-quality products. This product is certified original, ensuring authenticity and quality. For any technical support, warranty claims, or service inquiries, please contact HYULIGHTS customer service directly. Refer to your purchase documentation for specific warranty terms and contact information.
8.1 Security & Privacy
HYULIGHTS values your security and privacy. Your personal details are kept safe and are not shared with third parties without your consent.
