1. Product Overview
The JIKONG Smart Active Balance Battery Management System (BMS) is designed for large-capacity series lithium battery packs. It features voltage acquisition, high-current active balancing, and comprehensive protection functions including overcharge, over-discharge, overcurrent, and over-temperature protection. It also integrates a coulomb meter, Bluetooth communication, and optional GPS remote capabilities. This BMS is compatible with LiFePO4, Li-ion, and LTO battery types.
The core technology of this protection board is its energy transfer active balancing, which ensures a continuous balance current of 1A or 2A. This technology maximizes battery consistency, extends battery range, and delays battery aging. The system is supported by a mobile application for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth.


2. Specifications
The JIKONG Smart Active Balance BMS is available in 150A and 200A variants, supporting various battery configurations and features. Key parameters are detailed below.
2.1. General Specifications
| Parameter | 150A Model (JK-BxAxxS-15P) | 200A Model (JK-BxAxxS-20P) |
|---|---|---|
| Supply Voltage | 20-100 V | 20-100 V |
| Operating Power Consumption | <800 mW | <800 mW |
| Operating Temperature | -30 to 70 °C | -30 to 70 °C |
| Max. Collection Strings | 24 | 24 |
| Max. Balancing Current | 1A (or 2A optional) | 2A |
| Max. Charging Current | 150A | 200A |
| Max. Discharge Current | 150A | 200A |
| Max. Instantaneous Current | 300A | 350A |
| Max. Internal Loop Resistance | 0.65 mΩ | 0.5 mΩ |
| Protective Plate Size (L×W×H) | 162×102×20.4 mm | 162×102×20.4 mm |
| Finished Weight | 430 g | 430 g |
2.2. Functional Characteristics
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485/CAN (one of two)
- Support heating function
- Support GPS communication
- Discharge precharge function
- Charge overcurrent protection
- Charge overvoltage protection
- Charge over temperature protection
- Low temperature protection during charge
- Discharge overcurrent protection
- Discharge undervoltage protection
- Discharge over temperature protection
- Short circuit protection

2.3. Product Dimensions

3. Setup and Installation
3.1. Unpacking and Inspection
Upon receiving your JIKONG BMS, carefully inspect the packaging for any signs of impact or damage. Handle the protection board gently and avoid inverting it. Ensure all components listed in the packing list are present and undamaged.
3.2. Wiring Diagram
The JIKONG BMS is suitable for 7-24 series lithium battery packs. The wiring method varies depending on the number of cells in your battery pack. Refer to the diagram below for specific wiring instructions.

3.3. Interface Definition
The BMS features various interfaces for communication, temperature sensing, and control. Understanding these interfaces is crucial for proper setup.

3.4. Device Activation
Before powering on the protection board, double-check that the balance cables are correctly connected and that the P- and B- terminals are properly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.
The protection board does not have a power-on control switch and is designed for charging activation. To activate the BMS, connect a charger with a voltage 2V higher than the battery voltage after the battery assembly is complete. Alternatively, if you have selected the optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.
4. Operation
4.1. APP Installation
The mobile application for the JIKONG BMS supports Android (version 7 minimum) and iOS operating systems. You can download the APP by scanning the QR code below.

4.2. APP Operation Instructions
The APP allows for comprehensive monitoring and control of your BMS. After installing the APP, connect to the BMS via Bluetooth. The default password for connection is "1234".
The APP provides real-time data on cell voltages, battery power, current, temperature, and more. You can also access settings to modify various parameters and control functions.

4.3. Active Equalization
The active equalization function transfers energy from high-voltage cells to low-voltage cells to maintain battery balance. To use this feature, set the battery type and basic parameters (number of cells, capacity, trigger equalization differential pressure, voltage calibration, current calibration) in the APP's parameter settings. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C of battery capacity). The balance function can be enabled or disabled via the BMS control page in the APP.

4.4. Heating Function
The optional heating function uses a resistance heater or heating film to warm the battery at low temperatures, preventing performance degradation. The designed heating current is 4A. This function can be switched on/off via the BMS control page in the APP. It is recommended to install a temperature control switch (45°C to 65°C normally closed type) in series with the heating circuit as a secondary protection.4.5. Communication Function
The BMS supports optional CAN/RS485 communication. Users can select either CAN or RS485 for multiplexed ports on the BMS control page of the APP. The address and communication protocol can be configured according to specific requirements. Refer to the JIKONG Protection Board communication protocol document for details.
5. Protection and Safety Features
The JIKONG BMS is equipped with comprehensive protection features to ensure the safety and longevity of your battery pack.
5.1. Overvoltage Protection (Charge)
The BMS includes standard charge overvoltage protection. Users can set the single overcharge protection voltage and recovery voltage in the APP. If any cell's voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages fall below the recovery voltage.5.2. Undervoltage Protection (Discharge)
Standard discharge undervoltage protection is provided. Users can set the battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP. If any cell's voltage drops below the set undervoltage protection voltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell's voltage falls below the automatic shutdown voltage, the BMS will shut down automatically.5.3. Overcurrent Protection (Charge & Discharge)
The BMS features standard charge and discharge overcurrent protection. Users can set continuous current limits, overcurrent delay times, and recovery times in the APP. If the current exceeds the set limit for the specified delay, the BMS will trigger protection (stop charge/discharge). Operation resumes after the recovery time has passed.
5.4. Overtemperature Protection
Standard charge and discharge overtemperature protection is included. Users can set protection and recovery temperatures in the APP. If the BMS detects a temperature exceeding the set limit, it will stop the corresponding operation (charge/discharge). Operation resumes when the temperature falls below the recovery threshold.5.5. Low Temperature Protection (Charge)
The BMS provides standard charge low temperature protection. Users can set the low temperature protection and recovery temperatures in the APP. If the BMS detects a temperature below the set limit, it will stop charging. Charging resumes when the temperature rises above the recovery threshold. For extremely cold environments, using the optional heating function is recommended.5.6. Short Circuit Protection
The BMS includes standard short circuit protection. Users can set the short circuit protection delay (in microseconds) and recovery time (in seconds) in the APP. If a short circuit is detected, the BMS will trigger protection. If a short circuit occurs during initial connection of a charger or load, increasing the delay time may resolve the issue, as high instantaneous currents can sometimes trigger protection.5.7. Emergency Switch
The emergency switch function allows the BMS to operate for 30 minutes (charge and discharge) even if issues like over-temperature, over-discharge, or over-charge occur. This provides a temporary emergency power supply. During this period, the BMS will continue to operate even if a single cell reaches its automatic shutdown voltage, preventing unexpected power loss.5.8. Intelligent Sleep
The intelligent sleep function automatically puts the BMS into a low-power state if the charge/discharge current is less than 1A for 26 consecutive hours. This reduces the BMS's self-consumption. To reactivate the BMS, you can either press the physical button (if installed) or connect a charger.
6. Troubleshooting
If you encounter issues with your JIKONG BMS, follow these general troubleshooting steps:
- No Power/Activation: Ensure all wiring (P-, B-, balance cables) is correct and secure. Verify the battery pack is properly assembled. If using charging activation, ensure the charger voltage is sufficient (2V higher than battery voltage). If using button activation, ensure the button is correctly connected and pressed.
- Protection Triggered: Check the APP for specific fault codes or indicators. For overvoltage/undervoltage, check individual cell voltages. For overcurrent, verify the load/charger current. For overtemperature/low temperature, check the ambient and battery temperatures. Adjust protection parameters in the APP if necessary, but always within safe limits.
- Balancing Issues: Ensure the active equalization function is enabled in the APP. Verify that battery parameters (cell count, capacity) are correctly set. Check the balance differential pressure setting.
- APP Connectivity: Ensure Bluetooth is enabled on your mobile device. Verify the BMS is powered on. Try restarting the APP or your device. The default Bluetooth password is "1234".
- Unstable Readings: Check all wiring connections for looseness or corrosion, especially balance wires. Ensure the BMS is securely mounted to the battery pack.
For complex issues or persistent problems, refer to the detailed parameter settings in the APP or contact JIKONG customer support.
7. User Tips
- Regular Monitoring: Periodically check your battery's status via the JIKONG APP to ensure optimal performance and identify potential issues early.
- Parameter Customization: Take advantage of the APP's detailed settings to fine-tune protection parameters (e.g., overvoltage, undervoltage, current limits) to match your specific battery chemistry and application requirements.
- Wiring Integrity: Always ensure all wiring, especially the balance leads, are securely connected and free from damage. Loose connections can lead to inaccurate readings or system malfunctions.
- Temperature Management: If operating in extreme cold, consider utilizing the optional heating function to maintain battery performance and prevent low-temperature charging issues.
8. Warranty and Support
8.1. Service Commitment
JIKONG provides a three-year global warranty from the date of receipt of the goods. This warranty covers quality issues not caused by human factors, including functional failures and component defects.
8.2. After-Sales Process
In the event of a warranty claim or product issue, please follow these steps:
- Customer Application: Submit an application through official after-sales channels (email/online customer service). Provide your order number, a detailed description of the fault, and any supporting evidence (photos/videos).
- Return of Goods: The customer is responsible for the international logistics cost of sending the product back to China. A waybill number for tracking purposes must be provided.
- Packaging Requirements: Ensure all product accessories are complete and the packaging is intact to prevent damage during transit.
- Detection and Processing: After receiving the product, our quality department will complete the inspection and inform you of the repair/replacement plan within 5-7 working days. Responsibility for non-human damage: Free repair/replacement, with the seller bearing the return international logistics costs.
- Return and Tracking: After the repair/replacement passes the quality inspection, it will be sent back to the customer. Full logistics tracking information will be provided throughout the process. The return logistics cycle is typically within 7-15 working days (may vary due to customs clearance and other factors).
For cross-border compliance, customers may need to cooperate in providing necessary customs declaration documents (e.g., original purchase vouchers, repair statements) to avoid customs clearance delays.