1. Important Safety Information
WARNING: This accessory is designed exclusively for MEKEDE Android car radios. It is NOT sold separately and is only compatible with Android screens purchased from our shop. Attempting to use this accessory with non-MEKEDE products or incompatible systems may result in damage to the accessory, your vehicle's electrical system, or the car radio.
- Always disconnect the vehicle's battery before performing any electrical installation.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- If you are unsure about any step of the installation, seek professional assistance.
- Do not modify the wiring harness or CAN bus decoder.
2. Product Overview
This product provides various power cable and CAN bus decoder options to integrate your MEKEDE Android car radio with specific vehicle models. The available configurations cater to different vehicle wiring systems and feature requirements.
2.1 Available Configurations
- 52PIN no canbus: For vehicles that do not require a CAN bus decoder for basic radio functions.
- 52PIN with canbus: For vehicles with a 52-pin connector that require a CAN bus decoder to retain features like steering wheel controls, original camera, etc.
- 40PIN with canbus: For vehicles with a 40-pin connector that require a CAN bus decoder.
- 40PIN no canbus: For vehicles with a 40-pin connector that do not require a CAN bus decoder.
- Only canbus: A standalone CAN bus decoder module for specific integration needs.
2.2 Compatible Vehicle Models (Examples)
- Kia
- Hyundai
- VW
- Golf 7 (2013-2017)
- Touareg (2012-2015)
- MG ZS (2014-2017)
- LADA X-RAY (2015-2019)
- Tucson (2014-2018)
- IX45 (2013-2017)
3. Setup and Installation
The installation process involves connecting the appropriate power cable and, if necessary, the CAN bus decoder to your vehicle's wiring harness and the MEKEDE Android car radio.
3.1 General Installation Steps
- Identify Vehicle Connector: Determine if your vehicle uses a 40-pin or 52-pin main power connector.
- Select Correct Harness: Choose the MEKEDE power cable that matches your vehicle's pin configuration and your specific needs (with or without CAN bus).
- CAN Bus Decoder Requirement: If your car has an original screen with a camera, you will likely need to purchase and install a CAN bus decoder to ensure proper functionality.
- Connect Power Cable: Plug the vehicle-specific end of the power cable into your car's wiring harness.
- Connect to Android Radio: Connect the other end of the power cable to the corresponding port on your MEKEDE Android car radio.
- Install CAN Bus Decoder (if applicable): If your chosen harness includes a CAN bus decoder or you are installing a standalone unit, connect it as per the diagram. Ensure the decoder is securely connected to the harness.
- Secure Connections: Double-check all connections to ensure they are firm and properly seated.
- Test Functionality: Reconnect the vehicle battery and test the car radio's power, audio, and any CAN bus controlled features (e.g., steering wheel controls, original camera, reverse gear detection).
3.2 Wiring Diagrams and Components
Refer to the images below for visual guidance on connecting the various components.

Description: This image shows a wiring harness with multiple RCA connectors and a CAN bus decoder module. It highlights that if your car has an original screen with a camera, a CAN bus is required.

Description: A detailed view of a 52-pin wiring harness integrated with a CAN bus decoder, showing the main connector and the decoder box.

Description: Another perspective of a 52-pin wiring harness with a CAN bus decoder, illustrating the various wire connections and the decoder module.

Description: This image displays a 40-pin wiring harness that includes a CAN bus decoder, suitable for vehicles with this specific connector type requiring CAN bus integration.

Description: A 40-pin wiring harness without an integrated CAN bus decoder, designed for simpler installations where CAN bus functionality is not needed or handled differently.

Description: A close-up view of the standalone CAN bus decoder module, showing its connectors and identification label.
4. Operating Instructions
This product is an accessory for a car radio. Once correctly installed, it facilitates the proper functioning of your MEKEDE Android car radio within your vehicle's electrical system. There are no specific operating instructions for the power cable or CAN bus decoder itself; their operation is integrated with the car radio.
5. Maintenance
The power cable and CAN bus decoder require minimal maintenance. Ensure the following:
- Keep all connections clean and free from dust or moisture.
- Periodically check for any loose connections, especially after driving on rough terrain.
- Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.
6. Troubleshooting
If you encounter issues after installation, consider the following:
- No Power to Radio:
- Double-check all power cable connections to both the vehicle and the radio.
- Ensure the vehicle's battery is properly connected and charged.
- Verify that the specific power cable variant (40-pin/52-pin, with/without CAN bus) is correct for your vehicle and MEKEDE radio. - Steering Wheel Controls / Original Camera Not Working:
- This typically indicates an issue with the CAN bus decoder.
- Ensure the CAN bus decoder is correctly connected and compatible with your vehicle model.
- Confirm that your vehicle requires a CAN bus decoder for these features. - General Incompatibility:
- Reconfirm that your car radio is a MEKEDE Android screen purchased from our shop. This accessory is strictly compatible only with our specific products. - Intermittent Functionality:
- Check for loose or corroded connections.
If problems persist after checking these points, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MEKEDE |
| Origin | Mainland China |
| Special Features | Radio Tuner (Note: This is a general category for car accessories, not a feature of the cable itself) |
| Display Size | NONE (as this is a cable accessory) |
| High-concerned chemical | None |
| Pin Configurations | 40PIN, 52PIN |
| CAN Bus Options | With CAN bus, Without CAN bus, Only CAN bus module |
8. User Tips
No specific user tips are available from reviews or Q&A for this product at this time. Always ensure compatibility before purchase and installation.
9. Warranty and Support
For warranty information, technical support, or any questions regarding this product, please contact the seller directly through the platform where you made your purchase. Provide your order number and a detailed description of your issue for prompt assistance.