1. Introduction
The Miwayer HB-30 is a wireless audio system designed for electric musical instruments, providing a reliable and economical solution for transmitting audio signals without the need for cables. This system allows musicians to move freely on stage or in the studio, enhancing performance flexibility. It features a transmitter and a receiver, both equipped with rechargeable batteries and utilizing UHF high-frequency transmission for clear sound over a significant distance.
2. Features
- Long-lasting Battery Life: Equipped with a built-in 3.7V 850mAh rechargeable lithium battery, providing approximately 4-5 hours of continuous use on a single charge. A red indicator light illuminates during charging.
- Convenient USB Charging: Includes a USB data cable for easy recharging, allowing you to power up the device at home or on the go.
- High-Frequency Sound Transmission: Operates on a super high frequency of 730MHz, delivering crystal-clear audio. It boasts a transmission distance of up to 50 meters (164 feet) in open areas with a transmission delay of less than 4 milliseconds.
- Versatile Compatibility: Designed for use with a wide range of electric musical instruments featuring a 6.35mm jack, including electric guitars, basses, drums, and violins.
- Plug and Play: Features automatic channel setup for easy and quick connection, enabling a cable-free experience.
3. Package Contents
Please check the box for the following items:
- 1 x Miwayer HB-30 Transmitter
- 1 x Miwayer HB-30 Receiver
- 1 x USB Charging Cable
- 1 x User Manual

4. Setup Instructions
- Initial Charge: Before first use, fully charge both the transmitter and receiver using the provided USB charging cable. Connect the Micro USB end to the device and the standard USB end to a compatible USB power adapter (not included) or computer USB port. The red indicator light will be lit during charging and turn off when fully charged. Charging time is approximately 2 hours.
- Connect Transmitter: Plug the transmitter (marked "TX" and featuring a guitar icon) into the 6.35mm output jack of your electric instrument (guitar, bass, etc.).
- Connect Receiver: Plug the receiver (marked "RX" and featuring a speaker icon) into the 6.35mm input jack of your amplifier, mixer, or other audio equipment.
- Power On: Press and hold the power button on both the transmitter and receiver until their respective indicator lights turn on.
- Automatic Pairing: The transmitter and receiver are designed for automatic channel setup (plug and play). They should pair automatically. If they do not connect, briefly press the channel selection button on both units to cycle through available channels until a stable connection is established (indicated by a solid green light). The system supports 4 channels.


5. Operating Instructions
- Power On/Off: Press and hold the power button on both units for approximately 2-3 seconds to turn them on or off.
- Channel Selection: If you experience interference or wish to use multiple systems simultaneously, briefly press the channel selection button on both the transmitter and receiver. Ensure both units are set to the same channel for proper operation. The system supports up to 4 channels.
- Signal Indicator: The indicator lights on both units will show their status. A solid green light typically indicates a stable connection. A flashing light may indicate searching for a signal or low battery.
- Battery Status: Monitor the battery indicator lights. When the battery is low, the indicator light may flash or change color (refer to specific model indicators if available). Recharge promptly to avoid interruption.
- Optimal Performance: For best performance, maintain a clear line of sight between the transmitter and receiver. Avoid placing the units near strong electromagnetic interference sources. The effective transmission range is up to 50 meters (164 feet) in open areas.

6. Maintenance
- Cleaning: Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Charging: Always use the provided USB cable for charging. Avoid overcharging or completely draining the battery frequently to prolong its lifespan.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the batteries to about 50% every few months.
- Handling: Handle the transmitter and receiver with care. Avoid dropping them or subjecting them to strong impacts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal |
|
|
| Short battery life |
|
|
| Distorted sound |
|
|
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Miwayer |
| Model | HB-30 |
| Type | Guitar Transmitter Receiver |
| Main Material | ABS |
| Product Color | Black |
| Origin | Mainland China |
| Frequency Range | UHF (730MHz) |
| Frequency Broadband | 20Hz-20kHz |
| Transmission Delay | Less than 4ms |
| Transmission Distance | Up to 50 meters (164 feet) in open areas |
| Battery Type | Rechargeable Lithium Battery 3.7V 850mAh |
| Charging Interface | Micro USB |
| Charging Time | Approximately 2 hours |
| Usage Time | Approximately 4-5 hours |
| Product Dimensions | Approx. 110mm x 40mm (4.33in x 1.57in) |
| Net Weight | Approx. 120g (0.26 lbs) |
| Batteries Included | Yes |


9. User Tips
Based on general usage and product characteristics, consider the following tips for optimal experience:
- Always ensure both the transmitter and receiver are fully charged before a performance or practice session to avoid unexpected power loss.
- When experiencing signal drops or interference, try changing the channel on both units. This can help find a clearer frequency, especially in environments with multiple wireless devices.
- Keep the transmitter and receiver within the recommended 50-meter range and avoid physical obstructions between them for the most stable connection.
- For instruments with passive pickups, ensure your amplifier's input gain is set appropriately to avoid signal clipping or weak output.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.