JIKONG JKBMS V19

Contents

JIKONG Inverter BMS V19 User Manual

Model: JKBMS V19 | Brand: JIKONG

1. Introduction

The JIKONG Inverter BMS V19 is an advanced Battery Management System designed for various battery types, including LiFePo4, Li-Ion, and LTO. It features active balancing, comprehensive protection functions, and smart communication capabilities, making it ideal for home energy storage, communication base stations, and industrial backup power systems.

Product Advantages:

  • New firmware version V19 for improved stability and reduced failure rates.
  • Active balance for enhanced durability, longer life, and stable performance.
  • Real-time active energy transfer balance using a supercapacitor medium (Patent: ZL 2019 2 0479589.6).
  • Single-channel voltage range of 1V~5V with balance accuracy of ±5mV.
  • Achieves 2-10A continuous balance current to ensure battery consistency, improve battery life, and delay aging.
  • Mobile phone Bluetooth communication with dedicated APP for real-time battery status, supporting Android and iOS operating systems.
  • Compatible with Lithium Iron Phosphate, Ternary Lithium, Lithium Titanate, and other battery types.
JIKONG Inverter BMS V19 with display and interface board
Figure 1: JIKONG Inverter BMS V19 with main board, interface board, and 4.3-inch display.
JIKONG Home Energy Storage BMS features
Figure 2: Key features of JIKONG Home Energy Storage BMS including intelligent communication, safe battery expansion, high efficiency balance, and reverse polarity protection.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always disconnect power before working on the battery system.
  • Ensure all wiring is correct and secure to prevent short circuits.
  • Wear appropriate personal protective equipment (PPE), including insulated gloves and eye protection.
  • Do not attempt to open or repair the BMS unit yourself. Contact qualified personnel for service.
  • Keep the BMS away from water, moisture, and flammable materials.
  • Ensure proper ventilation around the BMS to prevent overheating.
  • Verify battery polarity before connecting to the BMS. Incorrect polarity can cause severe damage.

3. Package Contents

Upon receiving your JIKONG Inverter BMS V19, please verify that all items listed below are included and in good condition:

JIKONG BMS V19 Packing List
Figure 3: Visual representation of the JIKONG BMS V19 package contents.
  1. BMS unit (x1)
  2. Interface board (x1)
  3. Adapter cable B (1 long 30cm) (x1)
  4. Adapter cable A (1 long 30cm) (x1)
  5. R545 Network cable (1 long 40cm) (x1)
  6. Cells total B+ Cable (1 long 50cm) (x1)
  7. Sampling line A (2 long 90cm) (x1)
  8. Sampling line B (1 long 90cm) (x1)
  9. Sampling line C (1 long 90cm) (x1)
  10. Switch (1 long 50cm) (x1)
  11. Adapter cable C (1 long 30cm) (x1)
  12. Heating Adapter cable (1 long 17cm) (x1)
  13. Adapter (x1)
Video 1: Unboxing and initial overview of the JIKONG Inverter BMS V19 and its components.

4. Setup and Installation

Careful installation is crucial for the proper functioning and safety of your BMS. Follow these steps precisely:

4.1. Wiring Instructions

Before connecting, ensure all cables are properly identified and the battery pack is de-energized.

  1. Connect all the cables to their respective ports on the BMS and interface board.
  2. Insert the balance cable into the BMS.
  3. Connect the B-line and the P-line to the battery.
  4. Important: If there are two B8 cables, only the first B8 cable needs to be connected. The second B8 cable does not need to be connected.
Wiring diagram for 16-string and 8-string cells
Figure 4: Detailed wiring diagrams for 16-string and 8-string cell configurations. This diagram illustrates connections for the heater element, temperature control switch, inverter, charger, and motor load.

Wiring Method for 16-String Cells:

Refer to the top portion of Figure 4. Connect individual cell voltage sensing wires (B1-B16) to the BMS. Connect the heater element and temperature control switch as indicated. The total positive electrode connects to B+ and the total negative electrode connects to P-. Ensure the inverter, charger, and equal load of motor are connected to the appropriate P- and B+ terminals.

Wiring Method for 8-String Cells:

Refer to the bottom portion of Figure 4. Connect individual cell voltage sensing wires (B1-B8) to the BMS. Connect the heater element and temperature control switch as indicated. The total positive electrode connects to B+ and the total negative electrode connects to P-. Ensure the inverter, charger, and equal load of motor are connected to the appropriate P- and B+ terminals.

4.2. Communication Interfaces

The JIKONG BMS V19 supports multiple communication protocols for versatile integration:

JIKONG BMS V19 Communication Interfaces
Figure 5: Overview of communication interfaces on the JIKONG BMS V19, including CAN, RS485, UART, RS232, Parallel Module, Interface Board, Active Equalizer, and NTC.
  • CAN: Controller Area Network, a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other.
  • RS232/RS485: Serial communication interfaces for robust data exchange with external devices like inverters or PCs.
  • UART: Universal Asynchronous Receiver-Transmitter for general communication, often used for display or Bluetooth modules.
  • Parallel Module: For supporting parallel connection of multiple battery packs.
  • NTC: Negative Temperature Coefficient thermistor for temperature sensing.

5. Operating Instructions

5.1. Mobile APP Operation

The JIKONG BMS V19 can be easily monitored and configured via a mobile application, compatible with Android, iOS, and HarmonyOS.

  1. Download the "JIKONG BMS" app from your device's app store.
  2. Enable Bluetooth on your mobile device and open the app.
  3. The app will automatically detect nearby JIKONG BMS units. Select your device to connect.
  4. Once connected, you can view real-time battery status, including cell voltages, current, temperature, State of Charge (SOC), and alarm information.
  5. Navigate to the "Basic Settings" and "Advance Settings" sections within the app to modify parameters such as cell count, battery capacity, calibrating voltage/current, and communication protocols (UART, CAN, RS485).
JIKONG BMS Mobile App Interface
Figure 6: Mobile APP interface showing real-time battery data and settings for Li-ion, LiFePo4, and LTO batteries.
Mobile App Protocol Selection
Figure 7: Mobile APP interface demonstrating the selection of various inverter communication protocols.

5.2. PC Software Operation

For more detailed configuration and monitoring, the BMS can be connected to a PC using compatible software.

  1. Connect the BMS to your PC via the appropriate interface (e.g., RS232/RS485/CAN to USB adapter, if available).
  2. Install the JIKONG BMS host computer software.
  3. Launch the software and establish a connection with the BMS.
  4. The software provides a comprehensive interface to monitor real-time data, adjust protection values (overcharge, over-discharge, overcurrent, temperature), and configure communication protocols.
JIKONG BMS PC Software Interface
Figure 8: PC software interface for setting inverter communication protocols and monitoring system parameters.

Supported CAN Protocols:

Protocol NameCompatible Inverter Brands
DeyeDeye
PylonTechPylonTech
GrowattGrowatt
VoltronicVoltronic
China towerChina tower
WOWWOW

5.3. 4.3-inch Touch Screen Display

The optional 4.3-inch touch screen display provides a clear and convenient way to monitor and interact with the BMS directly.

JIKONG BMS 4.3 inch Touch Screen Display
Figure 9: The 4.3-inch touch screen display showing real-time voltage, current, temperature, and battery capacity.
  • View Information: With one click, you can view multiple information such as voltage, current, temperature, and number of strings.
  • Cell Pack Information: The display shows detailed information for each cell in the pack.
  • Protocol Setup: You can also set up RS485 and CANBUS protocols directly on the display.
Display showing cell pack information
Figure 10: The display showing detailed information for each cell in the battery pack.
Display showing RS485 and CANBUS protocol setup
Figure 11: The display interface for setting RS485 and CANBUS protocols.

6. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your JIKONG Inverter BMS V19.

  • Regular Checks: Periodically inspect all wiring connections for tightness and signs of corrosion.
  • Software Updates: Check for firmware updates for the BMS and app/PC software to ensure you have the latest features and bug fixes.
  • Cleaning: Keep the BMS unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquids or abrasive cleaners.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges to prevent damage.
  • Battery Health Monitoring: Use the mobile app or PC software to regularly monitor battery cell consistency and overall health. Address any imbalances promptly using the active balancing feature.

7. Troubleshooting

This section addresses common issues you might encounter with your JIKONG Inverter BMS V19.

Common Issues and Solutions:

  • BMS Not Powering On:
    • Check all power connections (B- and P- lines) to ensure they are secure and correctly wired.
    • Verify the battery voltage is within the operating range of the BMS.
    • Inspect for any visible damage to the BMS board or cables.
  • Communication Issues (Bluetooth/PC):
    • Ensure Bluetooth is enabled on your mobile device and the app has necessary permissions.
    • For PC connection, confirm the correct drivers are installed for any USB-to-serial adapters.
    • Verify the selected communication protocol in the app/PC software matches the BMS configuration.
    • Restart the app/PC software and the BMS unit.
  • Battery Imbalance:
    • The JIKONG BMS features active balancing. Ensure the balancing function is enabled in the app or display settings.
    • Allow sufficient time for the active balancing to work, especially for large imbalances.
    • Check individual cell voltages via the display or app to identify severely unbalanced cells.
  • Overcharge/Over-discharge Protection Triggered:
    • These are safety features. Check your charger/load settings to ensure they are within safe limits for your battery pack.
    • Review the protection parameters in the BMS settings (app/PC software) to ensure they are correctly configured for your battery type.
  • Password Reset:
    • If you forget your password, refer to the specific instructions in the mobile app or PC software for password recovery or reset procedures. Some models may have a physical reset button or a software-based reset option.

8. Specifications

Below are the detailed technical specifications for the JIKONG Inverter BMS V19. Please note that specifications may vary slightly depending on the specific model variant (e.g., 100A, 150A, 200A, 300A).

JIKONG BMS V19 Product Specifications Table
Figure 12: Comprehensive product specifications for various JIKONG BMS V19 models.
Technical IndexJK-PB1A16S10PJK-PB1A16S15PJK-PB2A16S15PJK-PB2A16S20PJK-PB2A16S30P
Number of Battery Strings (Li-ion)7S-16S7S-16S7S-16S7S-16S7S-16S
Number of Battery Strings (LiFePo4)8S-16S8S-16S8S-16S8S-16S8S-16S
Number of Battery Strings (LTO)14S-16S14S-16S14S-16S14S-16S14S-16S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A2A
Conductive Resistance in Main Circuit1mΩ0.65mΩ0.65mΩ0.47mΩ0.25mΩ
Continuous Discharge Current100A150A150A200A300A
Maximum Discharge Current (MAX 2min)100A150A150A200A300A
Over Charge Protection Current (ADJ)200A300A300A350A600A
Other Interfaces (Default)RS485/232/CAN/UART
Supply Voltage20-70V
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection4
Temp ProtectionYes
Short Circuit protectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS/Harmony
Parallel charging current limiting10A
Address dial switch4
DRY Contact2

Other Features: Temperature protection, Heating Function, Support Parallel Connection.

9. User Tips

  • PC Connection: For connecting the BMS to a PC, a USB adapter (e.g., USB to RS485/RS232/UART) is typically required. Ensure you have the correct adapter and drivers installed.
  • Firmware Updates: Regularly check the official JIKONG website or app for the latest firmware updates to ensure optimal performance and access to new features.
  • Parameter Adjustment: When adjusting protection values (overcharge, over-discharge, overcurrent, temperature, balance), always refer to your battery manufacturer's specifications to avoid damage. Read the internal parameters of the protection board first before making changes.

10. Warranty and Support

JIKONG products are designed for reliability and performance. For warranty information and technical support, please refer to the official JIKONG website or contact your authorized dealer.

The product is certified with CE, FCC, RoHS, and UL standards, ensuring quality and safety.

For any questions or assistance, please reach out to JIKONG customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.