Introduction
Thank you for purchasing the DIVEDEER Automatic Household Noodle Maker. This manual provides detailed instructions for safe and efficient use of your new appliance. Please read it carefully before operation and keep it for future reference.
This product is designed for household use only.
Functional Features
The automatic noodle maker is a modern appliance designed to produce various noodle shapes automatically. It is constructed from food-grade, non-toxic plastic, ensuring safe use for your family.
Product Structure and Components
Familiarize yourself with the main components of your noodle machine:
- Small Nut (1)
- Larger Nut (2)
- Extruding Die (3)
- Fixing Pan (4)
- Screw (5)
- Stirring Unit (6)
- Bucket (7)
- Bucket Cover (8)
- Body (9)
- Measuring Cup (10)

Safety Instructions
Please read and follow these safety precautions carefully to prevent injury or damage to the appliance:
- Before use, verify that your household voltage matches the label on the product.
- Ensure all parts are correctly installed before powering on. Do not operate if any abnormality is detected.
- Always power off the product after use.
- Do not immerse the main body of the product in water or any other liquid (refer to Figure 9 in the manual for visual guidance).
- This product is not intended for use by children, individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Keep the product away from fire or heat sources to prevent damage to the plastic body. Avoid humid environments.
- Do not attempt to disassemble or repair the machine or power cable if damaged. Contact qualified technicians or the manufacturer's after-sales service for repair.
- This product is for household use only. Do not use it in commercial settings such as factories, hotels, restaurants, or canteens. Avoid continuous operation for more than half an hour, as this can cause damage to the product.
Precautions for First Use
Before first use, clean all parts that come into contact with food using a mild dish-washing liquid. This includes components 2, 3, 4, 5, 6, 7, 8, and 10 as described in the "Product Structure" section. Do not clean the main body (9) with water, as this may cause electrical leakage.
Setup and Assembly
Follow these steps to assemble your noodle machine:
- Install the Bucket: Fit the bucket onto the machine. Ensure the small hole faces inwards and the large hole faces outwards.
- Install the Stirring Unit: Insert the stirring unit through the large hole of the bucket. Ensure the stainless shaft faces inwards.
- Install the Fixing Pan: Place the fixing pan. There are 3 holes on each side. Note: The large hole on the extruding chamber should face outwards.
- Tighten Small Nuts: Securely tighten the small nuts on both sides to prevent the stopper from shaking.
- Screw in Extruding Unit: Screw the extruding unit into the extruding chamber to connect it with the stirring unit.
- Fit Extruding Connector: Calibrate the upper and lower docking ports of the extruding connector. It is recommended to dip this part in warm water for 2 minutes before use.
- Close the Cover: Hold the plastic ear of the cover, align it, push it slightly, and press until you hear a "click" sound.


Operation Guide
This section details how to operate your automatic noodle maker to create fresh noodles.
Control Panel Overview

Noodle Making Process
- Preparation:
- Install the machine and power it on.
- Prepare plain flour, water, and cooking oil. Use the provided measuring cups (L, M, S sizes).
- Fill the desired amount of flour into the bucket using cup L (level with the top).
- Close the bucket cover securely. The machine will not operate if the cover is not properly installed.
- Mixing (Kneading):
- Press the two switches to the "Mix" position to start kneading.
- While mixing, add water (using cup M) and cooking oil (using cup S) through the filling opening.
- The mixing process will take approximately 3 minutes.
- After mixing is complete, press the large switch to "OFF".

Figure 5: The machine uses a "Tai Chi Kneading Technique" for thorough dough mixing. - Extruding (Pressing):
- After mixing, the machine will pause for 5 seconds.
- Press the two switches to "Extrude" to begin making noodles.
- Noodles will be extruded in 10-15 minutes until the bucket is empty.
- Once finished, press the large switch to "OFF".
Video 1: Demonstration of the automatic noodle making process, from mixing to extrusion. 
Figure 6: Freshly extruded noodles from the machine.
Important Notes for Operation:
- Always operate the machine strictly according to these instructions.
- Use room temperature water for mixing. Plain flour is recommended.
- Before using, dip the extruding net in hot water for 1-2 minutes. Ensure the net and fixing nuts are tightened before extruding.
- After starting the machine, add water and cooking oil within 10 seconds.
- If adding eggs, mix them evenly with water first. For fruit and vegetable juices, ensure they are freshly squeezed and added at the specified proportion; do not add unprocessed foods.
- The machine can continuously make noodles twice. After two continuous operations, the indicator will flash, and all keys will be disabled for about half an hour to allow the machine to cool down.
- Children are not permitted to use this product.
- Do not remove any fixing parts while the machine is in operation.
Cleaning and Maintenance
Proper cleaning ensures the longevity and hygiene of your noodle maker.
- Initial Drying (Step I):
After making noodles, immediately remove the extruding die, fixing pan, stirring unit, screw, and bucket. Place these parts in a well-ventilated area to air-dry the flour residue for 10-20 minutes. Do not clean with water directly at this stage.
- Wiping and Cleaning (Step II & III):
- Wipe the air-dried parts with a piece of cloth.
- For the extruding die, gently tap it or use a toothpick to remove dried flour from the small holes.
- Once wiped, clean the parts with water and dry them thoroughly with a piece of cloth.
- Place the cleaned parts in a ventilated area to dry naturally before re-mounting them on the machine.
- Important: Do not wash the main body of the machine with liquid or allow liquid to enter it, as this can cause electrical leakage. The body can be cleaned with a damp towel.

Troubleshooting
- Noodles break easily: This is often due to using flour that is not all-purpose (wheat flour) or has low gluten content.
- Solution: Use all-purpose flour for a chewier, springier, and smoother texture. If using bulk or low-gluten flour, add a pinch of salt to the water to increase alkalinity and improve noodle strength. Ensure the flour-to-water ratio is correct.
- Machine does not start: Ensure the bucket cover is securely closed. The machine has a safety interlock that prevents operation if the cover is not properly installed.
- Indicator flashes and keys are disabled: This indicates the machine has completed two continuous operations and needs to cool down. Wait approximately half an hour for the machine to reset.
Product Specifications
| Feature | Detail |
|---|---|
| Product Name | Automatic Noodle Machine |
| Model Number | MTJ-168D |
| Body Material | ABS |
| Control Method | Button Switch (Mechanical Switch) |
| Rated Voltage | 220V~ (also available in 110V~) |
| Rated Frequency | 50Hz (60Hz) |
| Rated Power | 180W |
| Noodle Making Time | 3 minutes (for mixing), 10-15 minutes (for extrusion) |
| Number of Noodle Molds | 9 different molds |
| Product Net Weight | 5 kg |
| Product Gross Weight | 6 kg |
| Product Dimensions (L x W x H) | 330 x 205 x 285 mm (13 x 8.1 x 11.3 inches) |
| Use Type | Home Use |
Note: Dimensions and weights are measured manually and may have slight errors.
User Tips for Best Results
- Flour Choice: For the best chewy, springy, and smooth noodles, always choose all-purpose flour (wheat flour).
- Dough Consistency: The ideal dough consistency for extrusion should be in peanut-sized granules.
- Flour to Liquid Ratio: The recommended ratio of flour to water to oil is 1:1:1. Minor adjustments (±5%) can be made based on local air humidity.
- Adding Ingredients: When incorporating eggs, mix them thoroughly with water before adding. For fruit or vegetable juices, ensure they are freshly squeezed and added according to the specified proportions.
Warranty and Support
Your product comes with a Warranty Card (refer to page 1 of the original PDF manual for details). For any issues, repairs, or technical support, please contact the seller or the manufacturer's after-sales service. Do not attempt to disassemble or repair the machine yourself if it is damaged.
A detailed user manual in PDF format is available for download: User Manual (PDF)