Introduction
The MiBoxer PZ2 is a versatile 2-in-1 LED controller designed for both single color and dual white LED strips. It integrates Zigbee 3.0 and 2.4G wireless communication protocols, offering flexible control options including app control, voice control via compatible gateways, and traditional RF remote control. This controller supports PUSH dimming and allows for brightness and color temperature adjustments, with a maximum output of 20A.

Specifications
| Parameter | Value |
|---|---|
| Model No. | PZ2 |
| Input Voltage | DC12~48V |
| Output | 20A/Channel |
| Total Output | Max 20A |
| Communication Protocol | Zigbee 3.0 + 2.4GHz |
| Control Distance (Zigbee) | 100m (open area) |
| Control Distance (2.4G RF) | 30m |
| IP Rate | – (Not specified) |
| Working Temperature | -10~40°C |
| Wireless Technology | Zigbee 802.15.4 |
| Wireless Frequency | 2.400-2.480GHz |
| Material | ABS |
| Certification | CCC, CE, ROHS |
| Applicable Lights | Single color / Dual white LED Strip |
Package Contents
- 1 x MiBoxer PZ2 2-in-1 LED Controller (Zigbee 3.0 + 2.4G) Output Max 20A
- 1 x User Manual (printed, as shown in product images)

Setup and Installation
Wiring Diagram
Carefully follow the wiring diagram below to connect your LED strips and power supply to the PZ2 controller. Ensure all connections are secure and correctly polarized (V+ to V+, V- to V-).

- Input: Connect your DC12V~48V power supply to the V+ and V- terminals.
- Output: Connect your LED strip to the V+, CW (Cool White), WW (Warm White), and W (White) terminals. The specific terminals used will depend on whether you are using a single color or dual white LED strip.
- Dimming: The GND and PUSH terminals are available for PUSH dimming functionality.
Pairing and Linking Modes
The PZ2 controller supports both 2.4G RF remote linking and Zigbee pairing. The 'SET' button on the controller is used for these functions.

- Activating Linking Mode (for 2.4G RF Remote): Press the 'SET' button once to activate the linking mode for compatible Mi-Light / MiBoxer 2.4GHz series remotes.
- Activating Zigbee Pairing Mode: Long press the 'SET' button for 3 seconds. The indicator light will flash quickly, indicating that the controller is in Zigbee pairing mode.
Switching Output Mode
The PZ2 controller can operate in two output modes: Single Color or Dual White. You can switch between these modes using the 'SET' button.
- To Change Output Mode: Press the 'SET' button continuously. The indicator light will change color to show the current mode:
- Red indicator: Single Color mode
- Green indicator: Dual White mode
Operating Instructions
2.4G RF Remote Control
The PZ2 controller is compatible with Mi-Light / MiBoxer 2.4GHz series remotes, allowing for wireless control within a 30m range. Ensure your remote is linked to the controller as described in the "Pairing and Linking Modes" section.

Smart App Control (Zigbee 3.0 Gateway Required)
For smart app control, a Zigbee 3.0 gateway (e.g., MiBoxer Zigbee gateway) is required. Once connected to a gateway, the controller can be managed via compatible smart home apps like Tuya Smart. This enables wireless dimming, color temperature adjustment, remote control, timing control, group control, and music rhythm functions.

Third-Party Voice Control (Zigbee 3.0 Gateway Required)
The PZ2 controller supports third-party voice control when integrated with a standard Zigbee 3.0 gateway. It is compatible with popular smart home ecosystems such as Philips Hue, IKEA TRÅDFRI, Amazon Echo Plus (2nd Gen), Echo (4th Gen), Echo Studio, and Echo Show (2nd Gen).

PUSH Dimming
The controller supports PUSH dimming functionality via the dedicated GND and PUSH terminals. This allows for direct physical control over brightness.
Maintenance
- Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight.
- Do not attempt to open or repair the device yourself, as this will void the warranty and may cause damage.
- Ensure proper ventilation around the controller to prevent overheating, especially when operating at maximum load.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED strip not lighting up | Incorrect wiring; No power supply; Faulty LED strip; Controller not powered. | Check all wiring connections according to the diagram. Ensure the power supply is connected and functional. Test the LED strip with another power source if possible. Verify the controller is receiving power. |
| Remote control not working | Remote not linked; Remote battery low/dead; Out of range. | Re-link the remote to the controller (press 'SET' once). Replace remote batteries. Ensure remote is within 30m range of the controller. |
| App/Voice control not working | No Zigbee gateway; Controller not paired with gateway; Gateway offline; Incorrect app settings. | Ensure a Zigbee 3.0 gateway is connected and online. Long press 'SET' for 3 seconds to activate Zigbee pairing mode and pair with your gateway. Check app settings and network connection. |
| Cannot switch output mode | Incorrect button press. | Press the 'SET' button continuously to cycle through Single Color (Red indicator) and Dual White (Green indicator) modes. |
User Tips
No specific user tips were available from provided reviews or Q&A content. Always ensure your power supply voltage matches the requirements of your LED strips and the controller (DC12V~48V).
Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.