1. Introduction
The HIKVISION DS-KIS608-P IP Video Intercom Kit provides a comprehensive solution for secure and convenient communication at your entrance. This multi-language system features Power over Ethernet (PoE) for simplified installation and integrates with the Hik-Connect mobile application for remote control and monitoring. It includes a door station and an indoor station, designed for reliable performance and ease of use.
2. Package Contents
Please verify that all items are present and in good condition upon unpacking your HIKVISION DS-KIS608-P IP Video Intercom Kit:
- Door Station (DS-KV6133-WME1) x1
- Indoor Station (DS-KH6350-WTE1 White) x1
- Power Supply Unit (PSU) x2
- 32GB TF card x1
- Key Fobs x6
- Power adapter (included in the package)
3. Product Overview
The DS-KIS608-P kit offers a robust video intercom system with advanced features:
- High-Resolution Video: 1080P video for clear imaging.
- 7-inch Display: The indoor station features a 7-inch colorful TFT screen with capacitive touch.
- Mobile Control: Convenient control via the Hik-Connect APP.
- Easy Communication: One call button on the door station for straightforward calls.
- PoE Power Supply: Standard Power over Ethernet (PoE) for simplified wiring and installation.
- Weather Resistance: Door station is IP65 rated for outdoor use.
- Wireless Connectivity: Supports 2.4G Wi-Fi for flexible network integration.
4. Specifications
4.1. Door Station (DS-KV6133-WME1)
| Feature | Specification |
|---|---|
| Operation System | LINUX |
| Flash | 32 MB |
| RAM | 256MB |
| Camera | 2MP HD camera |
| Low Illumination IR Supplement | 2.5M |
| Backlight Compensation | Support |
| Digital Noise Reduction | Support |
| WDR | True WDR |
| Field of View | Horizontal: 129°, Vertical: 75° |
| Video Compression Standard | H.264 |
| Stream (PAL) | Main stream: 1080p@25fps, 720p@25fps; Sub stream: 480p@25fps |
| Stream (NTSC) | Main stream: 1080p@30fps, 720p@30fps; Sub stream: 480p@30fps |
| Motion Detection | Support |
| Flash-light Frequency | 50 Hz, 60 Hz |
| Audio Input | 1 built-in omnidirectional microphone |
| Audio Output | 1 built-in loudspeaker |
| Audio Quality | Noise suppression and echo cancellation |
| Audio Compression Standard | G.722.1, OPUS, G.711U, G.711A, G.726, AAC_LC, AAC_LD |
| Audio Compression Rate | 16/32/64 Kbps |
| Audio Intercom | Two-way audio communication |
| Network Protocol | TCP/IP, SIP, RTSP |
| Wi-Fi | 2.4GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n |
| RS-485 | 1 |
| Network Interface | 1 RJ-45, 10/100 Mbps self-adaptive |
| Alarm Input | 4 |
| Lock Control | 1 relay, Max. 30 VDC 2 A |
| Door Contact Input | 1 |
| TAMPER | 1 |
| TF Card | 1 (Reserved) |
| Audio Output | 1 external loudspeaker (Reversed) |
| Power Consumption | < 10 W |
| Working Temperature | -40° C to 53° C (-40° F to 127.4° F) |
| Working Humidity | 10% to 95% |
| Dimension | 181.6 mm x 103.6 mm x 29.5 mm |
| Installation | Surface mounting, Flush mounting |
| Protection Level | IP65 |
4.2. Indoor Station (DS-KH6350-WTE1 White)
| Feature | Specification |
|---|---|
| Indicator | 2 |
| Power Supply | IEEE802.3af, standard PoE, 12 VDC |
| Operation System | Linux |
| Memory | 128 MB |
| Flash | 32 MB |
| Display Screen | 7-inch colorful TFT screen |
| Display Resolution | 1024 x 600 |
| Operation Method | Capacitive touch screen |
| Audio Input | 1 built-in omnidirectional microphone |
| Audio Output | 1 built-in loudspeaker |
| Audio Quality | Noise suppression and echo cancellation |
| Audio Compression Standard | G.711 U |
| Audio Compression Rate | 64 kbps |
| Wired Network | 1 RJ-45, 10/100 Mbps self-adaptive |
| Wireless Network | 2.4 GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n |
| Protocol | TCP/IP, SIP, RTSP |
| RS-485 | 1 RS-485 (Half duplex) |
| Alarm Input | 8-ch alarm inputs |
| Relay Output | 2 |
| TF Card | Support TF card, up to 128 G |
| Power Consumption | ≤ 5 W |
| Working Temperature | -10 °C to 50 °C (14 °F to 122 °F) |
| Working Humidity | 10% to 90% |
| Dimension (L x W x H) | 175 mm x 113.5 mm x 21 mm (6.9" x 4.5" x 0.83") |
4.3. Dimensions
5. Setup
This section outlines the general steps for setting up your HIKVISION IP Video Intercom Kit. For detailed wiring and mounting instructions, please refer to the specific installation guides provided with each component.
5.1. Basic Connection Diagram
5.2. Installation Steps
- Mount the Door Station: Choose a suitable location near your entrance, ensuring it is within Wi-Fi range or has access to a wired network connection. The door station supports surface mounting and flush mounting.
- Mount the Indoor Station: Install the indoor station in a convenient location inside your property.
- Connect via PoE: Utilize Power over Ethernet (PoE) for both the door station and indoor station. This simplifies wiring by delivering both power and data over a single Ethernet cable. Ensure your network switch or injector supports PoE.
- Network Connection: Connect the indoor station to your home network (via Ethernet or Wi-Fi) to enable remote access and mobile app functionality.
- Power Supply: Connect the provided PSUs to the respective devices if PoE is not used or as a backup power source if applicable.
- Hik-Connect App Setup: Download and install the Hik-Connect application on your smartphone. Follow the in-app instructions to add your intercom system and configure settings.
- Test Functionality: After installation, test all functions, including calling, two-way audio, video, and remote unlocking (if an electronic lock is connected).
6. Operation
Operating your HIKVISION IP Video Intercom Kit is designed to be intuitive:
6.1. Making a Call
- From Door Station: Visitors press the one-call button on the DS-KV6133-WME1 door station.
- The indoor station (DS-KH6350-WTE1) will ring, and a notification will be sent to your Hik-Connect mobile application.
6.2. Answering a Call
- From Indoor Station: Tap the 'Answer' icon on the 7-inch touch screen to establish two-way audio and video communication.
- From Mobile App: Open the Hik-Connect app on your smartphone, tap the incoming call notification, and select 'Answer' to communicate with the visitor remotely.
6.3. Door Unlocking
- Via Indoor Station: During a call, tap the 'Unlock' icon on the indoor station screen to open the connected electronic lock.
- Via Mobile App: During a call, tap the 'Unlock' icon in the Hik-Connect app to remotely open the connected electronic lock.
- Via Key Fob: Present one of the provided key fobs to the door station's reader to unlock the door.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your intercom system:
- Cleaning: Use a soft, dry cloth to clean the surfaces of both the door station and indoor station. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture. Do not use harsh chemicals or abrasive cleaners.
- Firmware Updates: Periodically check for firmware updates through the Hik-Connect application or the official HIKVISION website. Keeping the firmware updated ensures you have the latest features and security patches.
- Connection Check: Regularly inspect all wired connections (Ethernet, power) for any signs of damage or loose connections.
- Environmental Protection: Ensure the door station's IP65 rating is maintained. Avoid directing high-pressure water jets directly at the device.
- TF Card Management: If the 32GB TF card is used for recording, periodically review and manage stored footage to prevent it from filling up.
8. Troubleshooting
If you encounter issues with your intercom system, try the following troubleshooting steps:
8.1. No Power/Device Not Turning On
- Check Power Source: Ensure the power adapter is securely plugged into both the device and a working power outlet.
- Verify PoE: If using PoE, confirm that your PoE switch or injector is powered on and functioning correctly, and the Ethernet cable is properly connected.
8.2. No Video/Poor Video Quality
- Check Camera Lens: Ensure the camera lens on the door station is clean and free from obstructions.
- Network Connection: A poor network connection can affect video quality. Check your Wi-Fi signal strength or Ethernet cable integrity.
- Lighting Conditions: Ensure adequate lighting for the door station camera. The device has low illumination IR supplement for night vision.
8.3. No Audio/Poor Audio Quality
- Check Microphone/Speaker: Ensure the microphone and speaker on both units are not obstructed.
- Volume Settings: Verify that the volume levels on the indoor station and your mobile app are set appropriately.
- Echo/Noise: The system features noise suppression and echo cancellation. If issues persist, ensure proper installation to minimize external interference.
8.4. Hik-Connect App Issues
- Internet Connection: Ensure your smartphone has a stable internet connection.
- App Version: Make sure your Hik-Connect app is updated to the latest version.
- Device Status: Check the device status within the app to ensure it's online and properly configured.
9. User Tips
Here are some tips to enhance your experience with the HIKVISION DS-KIS608-P IP Video Intercom Kit:
- Utilize the Hik-Connect App: For maximum convenience, ensure the Hik-Connect app is installed and configured on your smartphone. This allows you to answer calls, view visitors, and unlock your door from anywhere with an internet connection.
- Multi-Language Support: Take advantage of the multi-language support for user interface and voice prompts to suit your preference.
- Secure Your Network: Always use strong, unique passwords for your Wi-Fi network and Hik-Connect account to protect your system from unauthorized access.
10. Warranty and Support
For warranty information, technical support, or service inquiries regarding your HIKVISION DS-KIS608-P IP Video Intercom Kit, please refer to the official HIKVISION website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.
