Kodak Kodak Ultra F9

Contents

Kodak Ultra F9/F9S Retro Film Camera

Instruction Manual

1. Introduction

The Kodak Ultra F9/F9S is a user-friendly, reusable 35mm film camera designed for capturing everyday moments with a classic, retro feel. Unlike disposable cameras, the Ultra F9/F9S allows you to load new rolls of 35mm film, offering an environmentally conscious and cost-effective way to enjoy film photography. It features a fixed-focus lens, manual film winding and rewinding, and a built-in flash for various lighting conditions.

Kodak Ultra F9 and F9S cameras in yellow and green
Kodak Ultra F9 and F9S cameras, showcasing the classic design.

2. Safety Information

  • Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
  • Keep the camera away from water and other liquids.
  • Do not attempt to disassemble or repair the camera yourself. Refer to qualified service personnel if needed.
  • Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
  • Dispose of used batteries and film rolls responsibly according to local regulations.

3. Package Contents

Please check that all items are present in your package:

  • Kodak Ultra F9/F9S Film Camera
  • Wrist strap (may vary by package)

Note: 35mm film and 1x AAA alkaline battery are not included and must be purchased separately.

Kodak Ultra F9 camera in its retail packaging
Kodak Ultra F9 camera shown with its retail packaging.

4. Product Overview

Familiarize yourself with the main components of your Kodak Ultra F9/F9S camera:

Technical diagram of Kodak Ultra F9 camera with dimensions and parts labeled
Detailed diagram of the Kodak Ultra F9 camera, including dimensions and key features.
  • Lens: 31mm, F=9, 1 element, fixed focus (1m to infinity).
  • Viewfinder: For composing your shots (Field = 70%).
  • Flash: Built-in flash with a push switch (120uf).
  • Shutter Button: To take photos.
  • Film Advance Wheel: Manually advances the film after each shot.
  • Film Rewind Crank: Manually rewinds the film back into the canister.
  • Battery Compartment: For 1x AAA alkaline battery.
  • Film Door Latch: To open and close the film compartment.

5. Setup

5.1 Battery Installation

  1. Locate the battery compartment cover on the camera body.
  2. Open the cover and insert one (1) AAA alkaline battery, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely. The flash will not operate without a battery.

5.2 Film Loading

The Kodak Ultra F9/F9S uses standard 35mm film (135 Film format).

Kodak Ultra F9 camera with various Kodak film rolls
The Kodak Ultra F9 camera is compatible with standard 35mm film.
  1. Open the film door latch on the side of the camera and open the back cover.
  2. Insert a new roll of 35mm film into the film chamber on the left side.
  3. Pull the film leader across to the take-up spool on the right side and insert the tip into one of the slots.
  4. Turn the film advance wheel slightly to ensure the film is securely engaged with the take-up spool.
  5. Close the back cover firmly until it latches.
  6. Advance the film by turning the film advance wheel and press the shutter button (without taking a picture) two or three times until the film counter shows '1'. This ensures the unexposed film is ready for the first shot.

6. Operating the Camera

6.1 Taking Photos

  1. Look through the viewfinder to compose your shot.
  2. Press the shutter button gently but firmly to take a picture.
  3. After each shot, manually turn the film advance wheel until it stops, preparing the next frame.

6.2 Using the Built-in Flash

The built-in flash is essential for low-light conditions or for adding fill light in bright conditions.

Kodak Ultra F9 camera highlighting the flash on/off switch
The Kodak Ultra F9 features an on/off switch for its built-in flash.
  1. To activate the flash, slide the flash switch to the 'ON' position.
  2. Wait a few seconds for the flash to charge. A red indicator light (if present) will illuminate when ready.
  3. Take your photo as usual.
  4. To conserve battery, slide the flash switch to the 'OFF' position when not in use.

6.3 Rewinding and Unloading Film

Once you have taken all the pictures on your film roll, you must rewind the film back into its canister before opening the camera back.

  1. Locate the film rewind crank on the top of the camera.
  2. Turn the rewind crank clockwise until you feel the tension release and the film is fully rewound into the canister.
  3. Open the film door latch and carefully remove the film canister.
  4. Take the exposed film roll to a photo developing lab for processing.

7. Maintenance

7.1 Cleaning

  • Use a soft, lint-free cloth to clean the camera body.
  • For the lens and viewfinder, use a specialized lens cleaning cloth and solution. Do not use abrasive materials.
  • Avoid getting moisture inside the camera.

7.2 Storage

  • When not in use for extended periods, remove the AAA battery to prevent leakage.
  • Store the camera in a cool, dry place, away from direct sunlight and dust.

8. Troubleshooting

ProblemPossible CauseSolution
Flash does not fireNo battery, dead battery, or flash switch is OFF.Insert a fresh AAA battery, ensure correct polarity, and slide flash switch to ON. Allow time for charging.
Film does not advanceFilm not loaded correctly, or film roll is finished.Re-load film carefully, ensuring it engages with the take-up spool. If finished, rewind and replace film.
Film cannot be rewoundFilm is not fully advanced, or rewind crank is not engaged.Ensure all frames are exposed. Turn rewind crank clockwise until tension releases.
Blurry photosSubject too close (less than 1 meter), camera shake, or insufficient light.Ensure subjects are at least 1 meter away. Hold camera steady. Use flash in low light.

9. Specifications

FeatureSpecification
Film Format135 Film (24x36mm)
Recommended ISO200 / 400
Optics Lens31mm, F=9, 1 element
FocusingFocus Free, 1m - ∞ (infinity)
Shutter Speed1/120s
Built-in FlashPush Switch, 120uf
Film TransportManual wind and rewind
View FinderField = 70%
Power Source1 x AAA Alkaline Battery (Not Included)
Dimensions (W x H x D)119mm x 67mm x 44mm
Weight170 grams
Main MaterialABS Plastic

10. User Tips

  • Film Choice: Experiment with different ISO films (e.g., ISO 200 for bright outdoor, ISO 400 for general use or slightly lower light) to see how they affect your photos.
  • Flash Usage: Always use the flash indoors or in shaded areas, even during the day, to ensure proper exposure.
  • Sunny 16 Rule: For outdoor shots in bright sunlight without flash, consider the 'Sunny 16' rule as a general guide, though your camera's fixed settings simplify this.
  • Composition: With a fixed lens, focus on interesting compositions and framing your subjects effectively.
  • Patience: Film photography requires patience. Enjoy the process of waiting for your developed photos!

11. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2023 Kodak. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.